Thank you! I live alone- no husband or even a boyfriend to come over and help me with my burner. I followed your advice, and it worked! Makes me miss electric stove tops!!!
Thanks so much for making this video. My right rear burner wasn't igniting and I followed the video. Cleaned all four and now, they all ignite quickly as well. Thanks for the tip and for saving me a repair bill.
Holy cow... I wish I had found this video several years ago. Dealt with a clogged burner on my Frigidaire stove for years because I couldn’t figure out how to get the thing off. I wish I had found this video before I finally figured it out on my own. This is exactly what I needed. Thanks for putting it out there for others who need it.
Thanks for the quick fix! Was in the middle of cooking and experienced this problem. Typically I just clean it out completely and it works. Knowing exactly where the issue is helped fix it in seconds! I am a bit in a hurry so don't have time to clean it out or take it a part so I just poked the toothpick in there directly and worked immediately.
this tip worked exactly as described! the igniter port was clogged so badly that I couldn't even find the hold at first...an easy fix and saved lots of $
Not sure if the person who made this video will ever see this, but I was having the same problem. I was going to call my home warranty people and that would have cost me $75 in a service call. So, I looked my problem up and found this video. Took about 5 min to fix....very easy!!!! Just when your done, put on the small black top thing back on the burner or the gas wont light. The top black thing keeps gas in the burner so the ignitor lights it. If the person who made this video is still here and your in Carson Nevada look me up.....I owe you a beer!!!!
One time I have some oil on the cave and it was not able to light. Even I clean many times, still didnot work out until I saw this video. No dirt at all, but just a small oil block the hole could cause the same issue. Thank you Sam
This was a great video! I thought I needed a new stove! Followed these directions and boom! Burners working again. I will mention that the first burner after I unclogged the small opening came right on, the second one, no luck. So after repeating the clearing process, I tried it again. Still no luck. So what I did was manually light the burner and let it burn for about 3 minutes. Then I turned it off and tried it again, just using the knob on the stove. Success!!
Thank you for demonstrating how to fix the problem. The toothpick easily broke free clogged debris and I used a 3/16" socket wrench to loosen the bolts from the burner on my Kenmore stove.
Holy crap. I have one working burner right now and thought I was the only one silly enough to let it get down to one, cthu!!! The kinds of meals I cook, we were eating dinner between 10:30 to11 something at night, lol.
PS: Doing this I only got one of my three broken burners back to working, so that's still better than just one working, lol. Gonna let my husband try to fix the other two. One clicks and has the gassy smell, the other doesn't click at all and I didn't wait for a gassy smell.
@@tonyahandy7170 Same, it worked for the 2 on the right, I've been lighting the left ones manually, but maybe Sam's part 2 will work: th-cam.com/video/-hsXoauqXIc/w-d-xo.html&ab_channel=SamSam
Simple fix... Worked like a charm. I took completely apart and cleaned... Wouldn't still ignite... But never thought about that little hole... That was the problem... Thank you sir
Thank you! I’m lucky that my husband does 95% of the cooking which he likes to do, but he is the messiest cook I know. So I clean the stove, grates etc. and I guess it was the hole that got clogged. I didn’t even have to remove the burner, just stuck a toothpick in and then used a small dry brush to wipe off the top of the igniter and then the burner lit!
This was a little helpful for my KitchenAid - my burners dont have that "little hole". BUT< I still removed it, used a gentle brush on it, (even though it was pretty clean), gently poked a toothpick delicately in the tiny hole where the gas comes out from - and VOILE! GAS! thank you Sam
wow! my burner has not been working for months. i put it through dishwasher, scrubbed with wire brush etc. but it still didn’t work. after watching your vid i grabbed a needle and within 30 seconds it was working again. thank you so much!
We tried everything, cleaning everything to no avail. You showing us the clogged hole triggered our repair. It's a small burner and hard to see. Thanks much for this video
@@sufiakhatun157 I'm no expert Sufia but you seem to have a different problem than the one in the video. Do you have multiple burners? Do they all light but then turn off or just one of them turns off? If it's just one then just make sure all the tiny holes are clean from food or debris. Something is blocking the flow of gas.
My burner lights, but it's a very dim flame that barely gives heat. I wonder if it just needs this cleaning. I'll be doing this this weekend first! Thanks!
Perfect! My challenge is that the two screws holding in the burner in place are corroded. I was able to turn one screw (Robertson head), but then the head just popped off the screw leaving the thread i place. The other screw has a stripped head, so it will be even harder to deal with Now I am nervous about proceeding. I fear it might become a major project.
Hi. Can you please tell me what drill bit or drill do I need to take out the screws. I have the same stove. Do I just buy a bit to attach to my drill I already have or buy a new drill? Please help.
Thank you. Ran out of propane but since a delivery my stove hasn't lit. I'm guessing this is the problem so I'll be cleaning the burners today. Hopefully it is and not an issue with the tank.
Despite the knobs are in the OFF position, should the gas main feeding the range be shut off too? Need an answer ASAP so I can fix my burners on my Kenmore Elite.
Ur video is indeed very helpful. Thanks a lot. But can u kindly please help me...... My Italian hob is quite OK but in one burner I am getting yellow flame. It's all blackish stains are coming to pots. And I keep my all 4 burners very clean. So can u please please help me?????? 👍
Daughter used gas job and was fine, later I went to use it and no gas, no smell of gas and tank wasn’t empty. Got the ignition but no gas coming through?
Hi, thanks so much for the video. My problem is what you described in the beginning of the video, where my spark is weak or faint on all burners. Would that be the igniter module that is defective? Thanks again.
is there another video for my problem? when i turn on my burner, which is lit, i smell gas. It seems worse when the fan is on. I smell gas intermittently in the area near the oven while the burner is on. What kind of technician do i need to help fix this? the range is original to the 1956 house, built in. The oven is built in across the room from the range, they're not together. The burners work fine, they stay on and stay lit. i'm just trying to find out whether this is a problem and if so, who do i call? i'm pretty sure there are no parts for this range, it's a Range Master.
I tried to remove the two screws and ... snap! Screw heads are now gone. It was then I realized my Frigidaire range ain't nothing like your Frigidaire range. Screws were seated on top of range surface and now I would say I have to figure out how to remove entire stove top to see just what was anchored to it underneath by said screws.
It depends on the make model etc. th-cam.com/video/WiS5a2uIIek/w-d-xo.html th-cam.com/video/qJgBv2bAUeE/w-d-xo.html Hopefully one of these will give you a better idea of how to troubleshoot your stove.
Thank you! I live alone- no husband or even a boyfriend to come over and help me with my burner. I followed your advice, and it worked! Makes me miss electric stove tops!!!
Good job girl hope everything went well
Me too! Good on us for working it out. My next step is to take a complete DYI course 💪🏻
Dang that must suck.
I have husband but useless I have to take all the stress
Thanks so much for making this video. My right rear burner wasn't igniting and I followed the video. Cleaned all four and now, they all ignite quickly as well. Thanks for the tip and for saving me a repair bill.
This worked! Fixed my burner and my big middle burner as well! I thought i had to pay a repair man! Thank you for the video!
Holy cow... I wish I had found this video several years ago. Dealt with a clogged burner on my Frigidaire stove for years because I couldn’t figure out how to get the thing off. I wish I had found this video before I finally figured it out on my own. This is exactly what I needed. Thanks for putting it out there for others who need it.
There's always a smart person with a less costly fix!
Thank you, you just saved me a couple hundred dollars & a lot of hassle!!! Long live TH-camrs like you 🙏🏻
My man thank you. Took me legitimately less than 2 min to fix my burner. Thank you and TH-cam. Gotta love it.
Thanks for the quick fix! Was in the middle of cooking and experienced this problem. Typically I just clean it out completely and it works. Knowing exactly where the issue is helped fix it in seconds! I am a bit in a hurry so don't have time to clean it out or take it a part so I just poked the toothpick in there directly and worked immediately.
Thank you Sam for leading the way in helping me repair my stove.
this tip worked exactly as described! the igniter port was clogged so badly that I couldn't even find the hold at first...an easy fix and saved lots of $
Not sure if the person who made this video will ever see this, but I was having the same problem. I was going to call my home warranty people and that would have cost me $75 in a service call. So, I looked my problem up and found this video. Took about 5 min to fix....very easy!!!! Just when your done, put on the small black top thing back on the burner or the gas wont light. The top black thing keeps gas in the burner so the ignitor lights it. If the person who made this video is still here and your in Carson Nevada look me up.....I owe you a beer!!!!
OMG, I'm so glad you mentioned putting the round cap back on top of the burner, mine didn't light after cleaning until I did that!
One time I have some oil on the cave and it was not able to light. Even I clean many times, still didnot work out until I saw this video. No dirt at all, but just a small oil block the hole could cause the same issue. Thank you Sam
This was a great video! I thought I needed a new stove! Followed these directions and boom! Burners working again. I will mention that the first burner after I unclogged the small opening came right on, the second one, no luck. So after repeating the clearing process, I tried it again. Still no luck. So what I did was manually light the burner and let it burn for about 3 minutes. Then I turned it off and tried it again, just using the knob on the stove. Success!!
Thank you for demonstrating how to fix the problem. The toothpick easily broke free clogged debris and I used a 3/16" socket wrench to loosen the bolts from the burner on my Kenmore stove.
Thanks, i needed to know the socket for size
Thanks Sam! Had I known this was such an easy fix I would have been using more than the single working burner for the last 4 years😝
Holy crap. I have one working burner right now and thought I was the only one silly enough to let it get down to one, cthu!!! The kinds of meals I cook, we were eating dinner between 10:30 to11 something at night, lol.
PS: Doing this I only got one of my three broken burners back to working, so that's still better than just one working, lol. Gonna let my husband try to fix the other two. One clicks and has the gassy smell, the other doesn't click at all and I didn't wait for a gassy smell.
@@tonyahandy7170 Same, it worked for the 2 on the right, I've been lighting the left ones manually, but maybe Sam's part 2 will work: th-cam.com/video/-hsXoauqXIc/w-d-xo.html&ab_channel=SamSam
Simple fix... Worked like a charm. I took completely apart and cleaned... Wouldn't still ignite... But never thought about that little hole... That was the problem... Thank you sir
This worked so quick! I didnt have the tools to remove but I poked a needle through the hole and it worked immediately :D thank you!
I scrapped the area with a steak knife. Damn I tried to burn the stuff off but burnt up my over head microwave
This was PERFECT! Totally fixed my burner! Saved me from paying for a repair
Thank u !! I was about buy another 1000$ stove .. cleaning it now ..
Worked great! Thank you so much. This is what you tube knowledge sharing is all about!
Thanks man
Saved me from my nagging girl 😂
2 burners did not ignite. Now fixed. Thanks so much!
Thank you! I’m lucky that my husband does 95% of the cooking which he likes to do, but he is the messiest cook I know. So I clean the stove, grates etc. and I guess it was the hole that got clogged. I didn’t even have to remove the burner, just stuck a toothpick in and then used a small dry brush to wipe off the top of the igniter and then the burner lit!
Thanks Sam you save me a lot of trouble and a visit from a repair man.
This was a little helpful for my KitchenAid - my burners dont have that "little hole". BUT< I still removed it, used a gentle brush on it, (even though it was pretty clean), gently poked a toothpick delicately in the tiny hole where the gas comes out from - and VOILE! GAS! thank you Sam
Thanks Sam...a good toothbrushing and safety pin port cleaning did the trick!
Worked great! Never thought about that tiny hole on the side!
wow! my burner has not been working for months. i put it through dishwasher, scrubbed with wire brush etc. but it still didn’t work. after watching your vid i grabbed a needle and within 30 seconds it was working again. thank you so much!
We tried everything, cleaning everything to no avail.
You showing us the clogged hole triggered our repair.
It's a small burner and hard to see.
Thanks much for this video
Thanks I believe this is what I need to do will do that tonight!
Just did it and that was it!!
What did you remove the two screws with?
N
Sam, thank you for your video. I followed your tips and now my burner works like new again.
My burner lits but won't stay on? Pls help
@@sufiakhatun157 I'm no expert Sufia but you seem to have a different problem than the one in the video. Do you have multiple burners? Do they all light but then turn off or just one of them turns off? If it's just one then just make sure all the tiny holes are clean from food or debris. Something is blocking the flow of gas.
@@ISLANDER1089 thank you for ur kindness so much
Thanks !
Thanks for the tip! Works great now!
Thanks for this-just what I needed to fix my burner!
Very helpful. Did it and it worked. Unclogged the port. Got flame
Thank you! This is a the video I needed. Some other asshat was like the top just isnt leveled. Your amazing ty!
Like a lot of things, keep it clean and it will give you years of good service!
Thank you I watched this and did exactly what you said and did! plus used a wire little brush and scrubbed it down ! Worked great after that !
What screw did you use?
Thanks so much. You really made it easy to understand. I’m going to try to fix my burners now. Wish me luck!
My burner lights, but it's a very dim flame that barely gives heat. I wonder if it just needs this cleaning. I'll be doing this this weekend first! Thanks!
I had this exact issue. Your video was clear and fixed my issue. Thank YOU!
Perfect!
My challenge is that the two screws holding in the burner in place are corroded. I was able to turn one screw (Robertson head), but then the head just popped off the screw leaving the thread i place. The other screw has a stripped head, so it will be even harder to deal with Now I am nervous about proceeding. I fear it might become a major project.
Hi. Can you please tell me what drill bit or drill do I need to take out the screws. I have the same stove. Do I just buy a bit to attach to my drill I already have or buy a new drill? Please help.
Thank you so much for this video. It helped so much. My stove is working like new again.
Thank you. Ran out of propane but since a delivery my stove hasn't lit. I'm guessing this is the problem so I'll be cleaning the burners today. Hopefully it is and not an issue with the tank.
Thank a lot ,i had this type of problem with my gas burner .Thank you 🙏🏻 very much iwill clean now.Can i use needle to clean hole.?
Despite the knobs are in the OFF position, should the gas main feeding the range be shut off too? Need an answer ASAP so I can fix my burners on my Kenmore Elite.
great tip. Thanks Sam! I'll give it a try. Having exact same problem you describe.
Thanks for the video. May I know what's the size of nut driver that you use?
Thanks, I fix my gas stove by watching this video.
Worked a treat. Thanks for posting.
Thanks for this video helped a lot it's short to the point and best of all it fixed the problem
Omg it fixed my burner! Thank you so much!
It worked!!! Yay!! Thanks so much!
That's all well and good but how to you unscrew the set screws? It looks like a screwdriver won't work on it.
Hey thanks sam I about to buy the new ignition wire, just the hole was plugged up.
Excellent, its really worked
Great video! However, you might want to emphasize that you should never use any kind of chemical cleaner, when working with any gas issues...🤙🤙
Thanks ,Sam ! That's very helpful n works !
Thank you. You have a new subscriber!
One of my burners has a hot spot the flame shoots out stronger on one spot then other side any experience with that ?
Thanks for easy fix of my burner(ignitor tiny hole).
Thank you very helpful. Got my burner going.
Ur video is indeed very helpful. Thanks a lot. But can u kindly please help me...... My Italian hob is quite OK but in one burner I am getting yellow flame. It's all blackish stains are coming to pots. And I keep my all 4 burners very clean. So can u please please help me?????? 👍
I clean these all the time. You can just take a paperclip and poke that hole without taking it off and clear it out
Thank you so much ❤️ Once I removed the grates I was able to see the hole. No removal necessary!
Do you know the thread size of the burner mounting screws?
What screwdrivers to remove the screws?
I know that I am 9 months late but I used a 5mm bit.
3/16mm 1/4"DR
Thank you sir! Stove top burner fixed 👍
What tool did u have to get those tiny screws out?
5mm bit
3/16mm 1/4"DR
Thank you so much for this! Super quick and easy. Thank you thank toy thank you.
Beautiful video and very important thank you 👍
Should I turn off the gas or at I good without?
This video is gold! Thanks!!
Thank you. Your video helped me 😁
really clear instructions. thank you so much! it worked!
This was very helpful. Thank you.
nice video i didn't have to take it off i just used a paper clip
Daughter used gas job and was fine, later I went to use it and no gas, no smell of gas and tank wasn’t empty. Got the ignition but no gas coming through?
Does anyone know what size socket to use on those screws and maybe where to find one? Thanks :)
What kind of tool do you use to unscrew the stove tops?
I hahe the same question
Thank you. I think this will fix my problem.
Worked perfectly thank you
Hi, thanks so much for the video. My problem is what you described in the beginning of the video, where my spark is weak or faint on all burners. Would that be the igniter module that is defective? Thanks again.
Thank you for helping!!!
Thanks for sharing this video it helped us
what size is that size of the mounting screw for the burner
5mm
3/16mm 1/4"DR
What size bolt are those please
A 5mm bit worked for me. Good luck!
Worked great, thank you so much.
Thanks that was so easy.
is there another video for my problem? when i turn on my burner, which is lit, i smell gas. It seems worse when the fan is on. I smell gas intermittently in the area near the oven while the burner is on. What kind of technician do i need to help fix this? the range is original to the 1956 house, built in. The oven is built in across the room from the range, they're not together. The burners work fine, they stay on and stay lit. i'm just trying to find out whether this is a problem and if so, who do i call? i'm pretty sure there are no parts for this range, it's a Range Master.
Good job, sir. Thank you.
What kind of screw driver you used ?
5 mm bit
3/16mm 1/4"DR
Thank you so much, great work this is brilliant
Thank you so much ❤️..I was ready to go buy a new one
Great tips, thanks for posting.
Great vid, simple and fast. Thanks for the help.
All the way from Kenya
Thank you.
Very helpful I was so much worried about my cooker.
This works! Thanks a bunch!
What tools did you use for open the burner?
3/16mm 1/4"DR
I tried to remove the two screws and ... snap! Screw heads are now gone. It was then I realized my Frigidaire range ain't nothing like your Frigidaire range. Screws were seated on top of range surface and now I would say I have to figure out how to remove entire stove top to see just what was anchored to it underneath by said screws.
If it’s not clicking? Or kind of clicks once in a while a weird click what’s that’s mean?
It depends on the make model etc.
th-cam.com/video/WiS5a2uIIek/w-d-xo.html
th-cam.com/video/qJgBv2bAUeE/w-d-xo.html
Hopefully one of these will give you a better idea of how to troubleshoot your stove.
The stove, regulator and gas tank are new but it's still not lighting. What could be the problem? Thanks in advance
What screwdriver did you use??
3/16mm 1/4"DR
Thank you, this fixed my problem !
life saver!!! Thank you!!!!!