Man those are some huge final drives! I ran a track press for a CAT dealer in Summerville and the biggest we saw was a d10. Each cleat for the track was 230# by itsself. HEAVY MACHINERY is good stuff.
If It's a regular D11R then it'll weigh something like 230,000 pounds, if its the Carrydozer version then it weighs something like 248,000 pounds IIRC.
It's strange seeing one with the cab off. It used to be typical of most heavy equipment for there to be no cab, but after 30+ years of seeing everything with cabs, it's just bizarre. Like looking backwards into the 1960s.
Awww crap!...just when i thought my Tonkas were winning and safe in ma sand pit ...you bought in this toy...sorry thing...sorry machine...sorry...Awww crap again
i need something like this in ROR. P.S. if you don't know what i mean its RigsofRods a soft body physics game look it up and download,donate and play its really fun
Yes, I knew that. I have a few books on heavy equip't but had never actually seen video of one in its partially knocked-down state. Very strange. Also bizarre: video of a large dump bed being transported without the truck. Knowing what it is doesn't stop it being peculiar as it goes down the road.
Not removed, not put on yet, but for that reason though. The dump trucks get delivered with no bucket and missing one set of rear tyres for that reason too
I used to run the yard at the Cat dealership in St Louis. These, and D-10s always took a pretty light touch to load. They really have to be centered just so-so. These, and backing two scraper pans attached to a Caterpillar Challenger onto a trailer was also kinda tricky. Fun times. Glad I'm retired.
When you post your opinion on a message such as this, you really can't expect people to not say something. When you post a message on a board such as this, you are, in fact, talking to me, and anyone else who reads your post. Just saying.
I'm interesting to study this career!!! it's my first time I love something like that!! well, i am trying to do test to study!! it can be free if I'll make a good test, but I dunno yet about it i just start knoing about it!!! so if someone can help me, thanks!! :) My name is Juan
Why don't they just ship it by air? Roll it into a C-5 and off you go! You don't even have to land to off load. Just shove it out the rear ramp and let the parachutes set it down softly on the job site. That would be quite a site, seeing this thing floating gently through the sky...damn, I am a fucking genius! Why don't people take me serious?
would you like to pay for the jet fuel and the cost of all the equipment needed to move this beast. you would still need to load it on to a lowboy to get it to the airport and I dont think the air force would even think about wasting the time and fuel just to drop a dozer out of the sky to a construction site
Kem sabe vocês mim contrata
Man those are some huge final drives! I ran a track press for a CAT dealer in Summerville and the biggest we saw was a d10. Each cleat for the track was 230# by itsself. HEAVY MACHINERY is good stuff.
Just an FYI, it would have been a lot more interesting watching the truck hook up to the trailer than the cat sitting there didling...
Bela amo
Sempre admirei os produtos CATERPILLAR ótimos em mineração 👍👍
Jangue Silva qz
Question; What type of truck pulls a D11
Answer; A Cat-A-Puller
Sounds like out of work cat workers yelling at cat because they built it and they laid everyone off over priced pei e of shit
damn never seen one with roll protection and the blade/ripper off....but the one they use on the mountain here never go anywere else so .......
who feels bad for the wood bllocks lol
@kingofbotswana1 im sorry i think u dont know russians.
Crush Something!....CRUSH SOMETHING!!!!...............DAMM IT!
That is one awesome machine,what does it weigh?
nothing can match that sound of a big diesel Cat idling.
over hieght, over weight thats why the cab and blade etc are removed
it really doesnt look that big...until you look at the operator and compare
I remember nearly shitting my pants when i would see ' diggers ' like this as a kid.
If It's a regular D11R then it'll weigh something like 230,000 pounds, if its the Carrydozer version then it weighs something like 248,000 pounds IIRC.
It's strange seeing one with the cab off.
It used to be typical of most heavy equipment for there to be no cab, but after 30+ years of seeing everything with cabs, it's just bizarre. Like looking backwards into the 1960s.
Mi papá siempre fue caterpillar y trajo und 10 con catarina
About 3:30 minutes long.
like the guy leaning over the primary boom . nice move buddy if a valve gave way it would be crushed to a pizza the human kind .
Awww crap!...just when i thought my Tonkas were winning and safe in ma sand pit ...you bought in this toy...sorry thing...sorry machine...sorry...Awww crap again
i need something like this in ROR. P.S. if you don't know what i mean its RigsofRods a soft body physics game look it up and download,donate and play its really fun
Yes, I knew that. I have a few books on heavy equip't but had never actually seen video of one in its partially knocked-down state. Very strange.
Also bizarre: video of a large dump bed being transported without the truck. Knowing what it is doesn't stop it being peculiar as it goes down the road.
The Russians couldnt build quality machinery like that if they tried
Used to push coal around too, v16 quad turbo diesel if I remember correctly
Dear santa, you might want to make your sleigh bigger
mit der würd ich gern mal arbeiten wollen,da brauchte ich erst mitwochs anreisen und könnte am donnerstag schon wieder nach hause fahren....lach.
Not removed, not put on yet, but for that reason though. The dump trucks get delivered with no bucket and missing one set of rear tyres for that reason too
I used to run the yard at the Cat dealership in St Louis. These, and D-10s always took a pretty light touch to load. They really have to be centered just so-so. These, and backing two scraper pans attached to a Caterpillar Challenger onto a trailer was also kinda tricky. Fun times. Glad I'm retired.
Порноф обб
whats the purpose of this tracked monster.
it's a bulldozer, just gotta remove some parts to transport
it would to tall if cab is left on duh
Wow,the biggest I have ever seen was a D8,but that thing is a monster.
I guess that thing weighs in at about 150,000 lbs. or 75 tons. Am I close?
Why is there no cab? Too tall for transport?
they never said it was finished being built.
It always comes down to wood dunnage !
possibly to tall to transport had to remove it? idk
When you post your opinion on a message such as this, you really can't expect people to not say something. When you post a message on a board such as this, you are, in fact, talking to me, and anyone else who reads your post. Just saying.
J'aimerais bien avoir un engin pareil pour me défouler ah ahahahahah 😂
its so true. The most important thing on the job site is dunnage.Never throw away the dunnage.
I'm interesting to study this career!!! it's my first time I love something like that!! well, i am trying to do test to study!! it can be free if I'll make a good test, but I dunno yet about it i just start knoing about it!!! so if someone can help me, thanks!! :) My name is Juan
to push mountains of dirt and rock
isso q e trato nao ,e aqui q temos no brasil
not really , John Deere is still trying to catch up!
j'ai toujours Adoré Caterpillar USA
powered by CAT fuck yea
Chuck Norris tinkertoy.
Actually ,Caterpillar has a plant in Russia
11 ARE BABIES NOW,, 15s'' ARE OUT'' LOL
love the sound of that diesel! sounds like nothing could stay in its way, I'd love to be that operator
,.:
Peliculas
Are those blokes from Canada?
its,magda
225,000 lbs. 102 metric tons
you didn't have to watch it, you wasted your own time.
Did she try to eat you for dinner?
so so true
I love the way the idle sounds.
Gary Lundberg bs
Man I thought it would crush the wood blocks
anything it want's !
nice!
The tracks don't even touch the lowboy because that isn't a lowboy. It's a beam trailer.
So big it look cool.
i want one
Ex wife.
C
luar biasa mantap
haha that made me laugh^ so true
luar biasa mantap
???????????and ???????
Why don't they just ship it by air? Roll it into a C-5 and off you go! You don't even have to land to off load. Just shove it out the rear ramp and let the parachutes set it down softly on the job site. That would be quite a site, seeing this thing floating gently through the sky...damn, I am a fucking genius! Why don't people take me serious?
would you like to pay for the jet fuel and the cost of all the equipment needed to move this beast. you would still need to load it on to a lowboy to get it to the airport and I dont think the air force would even think about wasting the time and fuel just to drop a dozer out of the sky to a construction site
+strayfoxairsoft not to mention the need to get it back out of the construction site with said lowboy and back to the airport.
Robert Rutherford exactly makes no sense to air lift
+strayfoxairsoft Somebody needs a sense of irony.
You might scratch the paint job.
"driver, could you move it to the left 1/2 an inch please"
Brand spankin' new!
Partially loading one of the biggest dozers in the business onto a lowboy. The tracks don't even touch the lowboy!
Scoop Excavator not a low boy BEAM TRAILER
Nice Bull.
a 4 min video of it idling.. its huge but its kind of a boring video.
K7.O900
green touché
ιωαννα
Hablen en español yes
Yeah ok....
Did you dozer?
Vvv
OH YEAH, I LOVE IT
musica.
The sound of that engine is wonderful.
Jz
@TDUB433
Cat is American...
Atreid3s Murican
d11 is hell of a equipment1
Anatomia
Matoub
ใหญ่มาก
Pra que ter uma máquina desse tamanho
Leandro Dambroski 0
The cavalry wish they had half as many horses.
Pl
cong nghe may moc that hien dai
hola
CA C'EST DU BULLDOZZER!!!!!!!!!!!!
retraité paisible p
@@juanduran4661 look dangerous no hard hats jumping into pinch points no lead an to dirrectmachine operator
finalmente me l'hanno consegnato cosi finisco di arare il mio orticello.......
Probably. Where I live the maximum height is 14'6" or so, since the telephone wires are 15' off the ground.