ขนาดวิดีโอ: 1280 X 720853 X 480640 X 360
แสดงแผงควบคุมโปรแกรมเล่น
เล่นอัตโนมัติ
เล่นใหม่
I like the little shimmy it does during transition - some complex aerodynamics ably managed by a robust design.
It's great to see Stallion in such beautiful shots and landscape. Good luck with your future flights!
Great video with the Stallion, huge respect to the chase pilot for the great shots! 🔥👍
This is awesome dude! I've dreamt up something scarily similar a while ago. Well done!
Thx! Why dream when you can do it for real 😉
Very nice! I'm working on on getting my stallion assembled!
Nice!
Im building one of their other models Great Designs
🔥🔥🔥
bravo
What's the approximate cost of materials (other than 3d printing supplies)?
Depends on the quality of the parts. I chose to go with good components and ended up around 500$. For the effort it takes to build it it's nice to give him the best chances of success
@SAMGO4 Do you know the final weight?
@@XSelianBladeX I printed mine as for the manual and it is 1560g, with battery I féy at 2.6Kg
Hi! What is the black line on the plane belly?
It's an automotive wear resistant tape for reinforcement of the belly in case of bad landing or airplane landing
Was setting up the firmware for Vtol difficult on Ardupilot or inav?
I would not say hard but reading the doc helped me immensely. It's hard to do it forst try without crashes
What did you use ?@@SAMGO4
How big of a printer is needed for this
Stl?
You can find them on flightory.com/product/stallion/
Great plane! If you replace the rear propeller with a foldable one, would it reduce a lot drag in airplane mode? I wonder if anyone ever tried that 😅
Yeah I guess or even aligning the prop with the fuselage would help. I have to think what could be implemented
I like the little shimmy it does during transition - some complex aerodynamics ably managed by a robust design.
It's great to see Stallion in such beautiful shots and landscape. Good luck with your future flights!
Great video with the Stallion, huge respect to the chase pilot for the great shots! 🔥👍
This is awesome dude! I've dreamt up something scarily similar a while ago. Well done!
Thx! Why dream when you can do it for real 😉
Very nice! I'm working on on getting my stallion assembled!
Nice!
Im building one of their other models Great Designs
🔥🔥🔥
bravo
What's the approximate cost of materials (other than 3d printing supplies)?
Depends on the quality of the parts. I chose to go with good components and ended up around 500$. For the effort it takes to build it it's nice to give him the best chances of success
@SAMGO4 Do you know the final weight?
@@XSelianBladeX I printed mine as for the manual and it is 1560g, with battery I féy at 2.6Kg
Hi! What is the black line on the plane belly?
It's an automotive wear resistant tape for reinforcement of the belly in case of bad landing or airplane landing
Was setting up the firmware for Vtol difficult on Ardupilot or inav?
I would not say hard but reading the doc helped me immensely. It's hard to do it forst try without crashes
What did you use ?@@SAMGO4
How big of a printer is needed for this
Stl?
You can find them on flightory.com/product/stallion/
Great plane! If you replace the rear propeller with a foldable one, would it reduce a lot drag in airplane mode? I wonder if anyone ever tried that 😅
Yeah I guess or even aligning the prop with the fuselage would help. I have to think what could be implemented