FM TRO trail at Hidden Falls w/Kia Sportage on 35's, welded rear, 5.38's, Torsen front, Aisin hubs
ฝัง
- เผยแพร่เมื่อ 3 เม.ย. 2022
- Finally! back to HF to finish up FM-TRO after the dog puking incident! We run the whole trail, which is the longest single track in the park. I had only run half of it before and had previously skipped a bunch of the bigger ledges and climbs, but not this time - we DID skip 1, but only one.
All the music is mine and is either my own solo stuff or music made by my band in the mid-late 90's.
Our next trip is to run down PINS as far as we can and following that, i will do a full build video on the Sportage and will include as many links as i can on that one.
Great in looking ride,nice work on on it brother and I ALSO have true appreciation of hearing the wife out there spotting & supporting you ❤️‼️💪
Oh you got a sharp Sportage, I’m trying to get to that set up!
Kia sportage 1997 grand TURBO 👍👍👍👍🇹🇯
Looks awesome
Love this thing and all the custom work you have on it. My dad used to have a 2 door and with a 2” lift and manual hubs it would go anywhere. Where did you source the lsd and 5.38s?
It took searching, but the LSD turned up on eBay and the gears are currently made in Korea and sold by Picorp. I need to add some links in the descriptions.
I’m trying to install a 2 in lift kit , do you have to disconnect the upper ball joint. I can get with an inch and I can’t get it under the strut!im just trying to get to a 235/75-15 or 30x9.50 lol . I don’t want to put anything in a bind.I have a 2002 Sportage 4x4. Power windows cold air 126000 miles. If it snows here in Kentucky I got 4 wheel drive no muddying lol.trying to get a certain look! Thanks
Yes, usually, you have to disconnect it from the steering knuckle in order to get the taller strut assembly in. Also, remove the CV shaft snap ring in the hub so the axle can slide in and out as you're moving things. For lots of good info go to the MicroMonsters Facebook group.
Hi david im just asking how come your front cv doest falls off did you do any modification on it ? Mine always falls off with that hieght my ride is a 2006 sorento .hav a nice day!
I drive carefully most of the time, especially with 35's! I still push it, but I don't beat on it too much. If it's bouncing I stop. I don't try to do a steep crawl at full steering lock. Etc.
I’m surprised you fit 35s. What lift did you have to run to fit 35s. I ran the tj Jeep springs and spacers and only could do 33s with a lot of cutting. I’m also curious on your rear tire carrier. Is it reinforced to hold the additional weight of the 35?
Yes, lots of cutting to fit 35's and as you can see in the video, they still get chunked up against the body. Lift is a combo up front, but based on the Ford Aerostar coils out back. I'm planning a whole video on the entire build soon, probably 2 weeks.
@@KiaDave ir would be great if you could show your upgrades. I have a sportage too
@@enricomegachiesa9203 I will soon
@@KiaDave hurry up man and post. you have me drooling here , that's looks awesome great job
lunar vehicle
Sarava
Wow i cant belive whats possible with a Spotrage 👍👍 but german TÜV say NO NO NO 😂😂