I recently stumbled across one of these at a location called ‘The Car Wash Corral’, located in Cochrane, Alberta, Canada. I bought the touchless option and it did decent.
If anyone does not know the cycles on the soft touch wash, here they are: -Solvent/Emollient -Tri-Foam -High Pressure Wash -Soft Touch Wash with Shampoo -Soft Touch Wash with Wax -Dryer And, here’s the cycles on the touch free: -Solvent/Emollient -Tri-Foam -High Pressure Wash -Wax -Spot Free Rinse -Dryer These systems are great and remarkable. They do a great job.
I don't see any issue. The foam with low pressure take a while to get the right effect and to reach the right distance. The machine wait the correct flow 3-4 seconds before to go. (but I mean this effect.. if you see any other issue, please explain me.. I Don't see it) thanks
Joni Jussila You mean less in the middle and too much on angles.. ? You can solve the problem stopping a little while in that position. I got another rollover and that problem is solvable
Francesco B. Stopping a little in that position = wasted performance, The passenger side nozzles are dampeded for obivious reasons. There is an issue with foam, energy and washes per hour. This commercial T-700 video shows poor performance in every aspect, Russian Standard?
1:28 did you see that hole that the water sprayed out
I recently stumbled across one of these at a location called ‘The Car Wash Corral’, located in Cochrane, Alberta, Canada. I bought the touchless option and it did decent.
A mi nieto le gusta mucho este video. Y cuando quiere que se lo ponga me dice nina!! Tulutun. Es como le hace la música 🤣🤣🤣👍👍
If anyone does not know the cycles on the soft touch wash, here they are:
-Solvent/Emollient
-Tri-Foam
-High Pressure Wash
-Soft Touch Wash with Shampoo
-Soft Touch Wash with Wax
-Dryer
And, here’s the cycles on the touch free:
-Solvent/Emollient
-Tri-Foam
-High Pressure Wash
-Wax
-Spot Free Rinse
-Dryer
These systems are great and remarkable. They do a great job.
What is the website
From 0:57 everyone can see major issues in this Tammermatic unit. Common problem. Sad, but true. Nozzles are not maintained properly.
I don't see any issue. The foam with low pressure take a while to get the right effect and to reach the right distance. The machine wait the correct flow 3-4 seconds before to go. (but I mean this effect.. if you see any other issue, please explain me.. I Don't see it) thanks
Francesco B. "The foam with low pressure take a while to get the right effect and to reach the right distance. " Where is is the foam ito begin with ?
Joni Jussila From: 0:55 to 1:05, Where is the foam in the back of the Opel Insignia, Dear Francesco B.
Joni Jussila You mean less in the middle and too much on angles.. ? You can solve the problem stopping a little while in that position. I got another rollover and that problem is solvable
Francesco B. Stopping a little in that position = wasted performance, The passenger side nozzles are dampeded for obivious reasons. There is an issue with foam, energy and washes per hour. This commercial T-700 video shows poor performance in every aspect, Russian Standard?
nice with a broken carwash LOL no wheelcleaner and the water go to the wrong side
Praice