Lol. Just installed the same ones a week ago. They look and work great! Great company. I also hit myself taking the knobs off. Looked twice for a set screw. Lol great video. I do wish honda would label the shift positions so you can see them better. Before these I used white nail polish.
They are a great product and another great thing is that we can replace the rubber backing. That knob about got me. I had to put the slow motion in to get the full effect. lol. I agree also that Honda could do a better job labeling them and they also could do a better job of keeping the wind from coming thru that shifter plate. That's a great idea with the finger nail polish for the ones that don't want to spend the money for the plkates.Thanks for watching
I put a 4in bilge fan in middle under seat with a 4in vent with a reversible variable speed drive and the heat of the motor makes it really nice. I use it for blowing the seam and heat out too. Don’t cost much to do.
Greetings from Straw Plains, my friend. As always, thank you for the video. I ordered these for my P1K5 and did a faux install with duck tape just to check the shifting alignment prior to drilling. It appears the shift levers do not fully engage in their respective slots. It doesn’t appear you had the same issue. Any tips would be appreciated.
Hello neighbor and thanks for watching. I did not have that issue with mine. Now the rubber was real stiff when I installed and would not let them set in the lock in position real good but after using them. They work perfect.
There is still a gap between the back of the door and the roll cage, But its cut the dust down by 80%. In my opinion its worth the money. I love mine so far
Hello, Does anyone know how to get ahold of RadCustoms. I ordered Shifter Covers in early October and haven't received them yet. I haven't received them yet. I have emailed and called him but got nothing in return. Thanks, Tony
I’m afraid I don’t know anymore contact info than you. I just purchased stuff from them in the past and added to my pioneer in the videos. I’m not sponsored by them in any way
Piney, I figured that I would post on your video because that's where I got the idea. I didn't think you were sponsored by him. I figured this is the best place to try and find out. Tony
@@tonystoner5921 I agree, there is more people here that have this product than anywhere else. Hope you get an answer soon. Your welcome and thank you for watching
Shout out to New york from Tennessee. Most of my shows are in the southeast. We are sometimes set up at the NWTF convention in Nashville. We do not have any we are attending this year but everything for 2025 will be announced on my channel.
Lol. Just installed the same ones a week ago. They look and work great! Great company. I also hit myself taking the knobs off. Looked twice for a set screw. Lol great video. I do wish honda would label the shift positions so you can see them better. Before these I used white nail polish.
They are a great product and another great thing is that we can replace the rubber backing. That knob about got me. I had to put the slow motion in to get the full effect. lol. I agree also that Honda could do a better job labeling them and they also could do a better job of keeping the wind from coming thru that shifter plate. That's a great idea with the finger nail polish for the ones that don't want to spend the money for the plkates.Thanks for watching
I put a 4in bilge fan in middle under seat with a 4in vent with a reversible variable speed drive and the heat of the motor makes it really nice. I use it for blowing the seam and heat out too. Don’t cost much to do.
This sounds like a perfect future project for me. I will have to look into this a little deeper. Thank you for sharing
The video was great as usual! Are the plates all the same color just outlined in the different colors? Thanks.
Thank you. These plates are all black but there is many different colors to chose from on the outline. They are nice plates and really look good.
Greetings from Straw Plains, my friend. As always, thank you for the video. I ordered these for my P1K5 and did a faux install with duck tape just to check the shifting alignment prior to drilling. It appears the shift levers do not fully engage in their respective slots. It doesn’t appear you had the same issue. Any tips would be appreciated.
Hello neighbor and thanks for watching. I did not have that issue with mine. Now the rubber was real stiff when I installed and would not let them set in the lock in position real good but after using them. They work perfect.
Thank you for sharing
Over got similar ones and they work great and look really custom.
✌️🇺🇲🙏
Your welcome and thanks for watching. I love there’s so far. Really cut the wind down.
Did you order from Rad or ??
How's the cab seal on dirt roads? I live in Kansas and we have some dirty roads want try to get my 1000-5 dust free as possible one day.
There is still a gap between the back of the door and the roll cage, But its cut the dust down by 80%. In my opinion its worth the money. I love mine so far
Cab seal???
That looks great brother! Im going to be sending you a sticker tomorrow!
Thanks bro , they turned out pretty nice. Cut the wind down considerably. Sounds good on the sticker I’m looking forward to it.
Very nice and hope it cuts down on the dust as well.
Thank you. So far these plates really cut down on the wind flow and they look really good. Lol. Thanks for watching.
Do they glow in the dark?
No they are just etched in whatever color you order But That would be real cool if they did. lol
Do they ship to Canada?
I checked there web sight and I did not see any restrictions about shipping to Canada.
@@pineylife can I grab that website from you please
@@Miami788 yes the website is . www.radcustomsidaho.com/
They give you any promo codes? Just curious, getting ready to order a set
No bud they didn’t. I bought them no sponsorship for these.
Hello, Does anyone know how to get ahold of RadCustoms. I ordered Shifter Covers in early October and haven't received them yet. I haven't received them yet. I have emailed and called him but got nothing in return. Thanks, Tony
I’m afraid I don’t know anymore contact info than you. I just purchased stuff from them in the past and added to my pioneer in the videos. I’m not sponsored by them in any way
Piney, I figured that I would post on your video because that's where I got the idea. I didn't think you were sponsored by him. I figured this is the best place to try and find out. Tony
@@tonystoner5921 I agree, there is more people here that have this product than anywhere else. Hope you get an answer soon. Your welcome and thank you for watching
When my wife asked me why am I spending so much on the UTV.. I’m saying piney said it looks good 👍
LOL. That will work but if you ever come to one of the shows I attend give me a heads up before she kills me. lol.
@@pineylife what show and where ? I’m in New York.
Shout out to New york from Tennessee. Most of my shows are in the southeast. We are sometimes set up at the NWTF convention in Nashville. We do not have any we are attending this year but everything for 2025 will be announced on my channel.
I'm gonna sleep better knowing my shifter knobs are not gonna fly off anytime soon.
Lol. No kidding. Thanks for watching. 🤣🤣🤣
So where can a guy get a set of these? You must have got the last set in existence.
Here is the link.www.radcustomsidaho.com/product-page/shifter-covers-pioneer-1000