I did pretty much the same with 4" hose. My change was no filter on the lid, but another 4" exhaust that I port outdoors (I'm in a rural area) in nice weather or into a pillow case when indoors. Thanks for the video!
Thanks for the video John. I have been watching your channel for some time now. I have the same planer and built a very the same type of can you have. And I must say that this a very slick set up. It catches all of the chips and dust. The only difference is I used a 4" hose. Again thanks for the videos. I am always looking for your new ones.
As to your fine dust filter, build a small wood framework over the hole big enough to stretch a pillow case over, they work AWESOME for filtering planer dust.
Well, now I feel bad about gluing the melamine chip I knocked off my jointer base back on. Lol. Way to cut down on hole-saw dance while going at that slanted hole. I’m still learning new tricks at 75 thanks to TH-cam and “real” guys like you. I subbed. Thanks!
I was thinking of buying a vacuum but seeing this video is going to save me a lot of funds. This Dewalt planer is absolutely amazing I don't regret buying. Great job 😁
Great work there John, like how you drilled the hole in the top at an angle with a hole saw. Gives me some ideas on a project I'm working on. Thanks again!
I used a food grade 30 gal barrel with the seperate top and clamp. It makes a perfect air tight seal and is easy to remove to empty. No messing around with making a top and the 4" holes cut easy.
Bench dings equate to experience. You get better as dings accumulate. Instead of the exhaust on the top put in another hose port on the side at the top of the can or another angled out on the top over at the edge of the cover and send that hose to a shop vac. The micron filter on the shop vac will get the fine dust and the added suction will help pull the chips out of the planer. I use that same DW735 and it puts out more chips and dust than anything in my shop. I've put my shop vac hose on it and that seems to work very well. That model of planer really pushes out the chips but without suction (I've tried that) I get chips back down and it gets under my work and will cause sniping or uneven planing. I like how you made the lid attachment. Love the videos.
Gail Long Actually, bench dings equate to not caring. I can go out and beat the living hell out of it within an hour and I'll still have the same experience.The blower on the planer is strong enough to work in this arrangement, as demonstrated. No need to attach a shop vac.
Yep I have the Ridgid planer that also has vacuum assist; works fine without shop vac. I use a round duct with a sander bag attached to vent the container. I have my container setting on the mobile base under the stand planer rest on. Good video
This is a planer which puts out much less dust. than most shop tools. Mine uses a bag filter used with many shop vacs so no dust problem there. For others I used a shop vac with bag as it is sufficent for my uses and captures dust very well. Only dust I get is from hand sanding when I do it or machine which is fine and impossible to fully eliminate.Planer make more shaving to pickup so I want it contained for less cleanup.
That's a great setup. I was wondering if doubling or tripling the screen might work for the fine dust. Also I wanted to ask if using a trash can with the rubber lid it comes with would work instead of making that led.
I wonder how much pressure the blower in that planer produces. With a small filter like that, you may need quite a bit of pressure to get enough airflow.
The 735 has a chip ejector velocity close to that of an F-14 after burner. It will inflate my Delta dust collector through 20 feet of 4" hose and an trash can separator.
Yeah, I had to rethink my dust extractor/ Thien baffle setup as soon as I plugged it in. It literally blew the top of my collection bucket, proving it had far more blow than my extractor had suck.
In my case, I half filled a drum with water then directed the flow of dust to the bottom with a 4" diameter pipe with several holes on its sides near the bottom. In this way, the fine dust particles are soaked and sink to the bottom. The shavings are pushed out at the bottom. I left a gap of 6" between the bottom of the drum and the pipe.
Nice. A similar solution is to cut two large holes in the plastic lid of one of those animal stopper garbage cans (the ones with the hold down straps). You can cut out about 2/3 of the lid without any structural issues. Then seal off the top of the garbage can with a fairly fine cloth (even better if you sew in draw strings) and have a reinforced hole to pass the hose through. Clamp on the lid and you are ready to go. No fine dust gets out and it allows for lots of air flow. I did end up eventually wrapping copper wire around the lid and hose and grounding it at the planer when I got tired of being shocked.
Having the same dewalt 735, I think I'll have to go invest in a garbage can, some 2 inch hose and a few parts. I'm currently using a vacuum, but the filter gets blocked in 2 or 3 7 meter boards. Tapping the filter looks like a great idea to me.
I built a version of this model using a 55 gallon drum with a secure ring to hold the lid on. I cut an 8" opening for the screen vent. For the hose from the planer to the barrel I'm using 3" dryer vent tubing. Works ok but I'm getting chip blowback into the planer. Any thoughts on what could be causing that? I'm thinking the 3" hose may be the culprit.
Btw: What is the PVC tube running down your workbench intended to do? I have a showbench at home ... the one in the living room called dining table with only one accidential drill hole in it. Cool wording!
It looks like you are trying to drill the worlds largest pocket hole when you are making your hose port. I always kick myself when I manage to damage something. Keeping things looking nice is ok, but at the end of the day function is more important than form if you want to get things done. Great project.
looks pretty good. Definatly need something like this. Thinking I may use a shop vac as well for the fine dust but your uses only one appliance and, hence, less electricity. I`m on the fence. Thanks for posting.
what about trying a wool fabric like some of the dust filters use? its got fine fibers that catch the little dust particles and you don't want to shake it you want it to build a cake inside the filter. Just a thought.
What did you use to attach the hose to the planer? I made up a connector by heating up a PVC fitting (to get it to fit OVER the DW735 outlet. I was connecting to a 'standard' 'ShopVac' hose.
Great video. I admire when someone uses their brain to create something rather than just go and pay for someone else's idea. A question about the planer, I have a DeWalt but not your model. I have the DW734 and I was told your model has a built in fan to expel the wood chips and mine does not. I was wondering if your project would work for me? I have a shop vac connected to a Vortex Dust Right Seperator and with my 21/2 in. hose, I have lots of chips clogging and not expelling from the Planner. What do you think? Thanks, Robert
I watched a lot of vids, took these guys days, time lapse, but you could say they put the effort it takes NASA to build what you did so fast and easy. Do you know how much you put the others to shame showing us how easy it really should be? I was laughing because you made it seem ridiculously easy! Still laughing as I write this! GOOD JOB, well don sir, well done!
With your final filter I think you will be really surprises as to how much dust is really floating in the air (this is the dust that is really harmful), Just looking around in the shop you will not be able to detect the fine dust that is in the air. For much more effective dust collection build the Thien tophat, connect it to your dust collector and use 4" pipe rather than the 2".
Looks great. I like how you show all the steps that go into the process, including the ones that don't work and then the adjustments you make to make it work. Do you have plans for a little extension table to catch the wood as it comes out? Sadly my Makita does not have the chip blower motor - they need to steal that idea. Scott
This is solely from the out put from the planer port? I've heard (and just read somewhere...not doubting you lol) that if you don't have something pulling air, it will clog...clearly not the case! Thanks for the tip, gonna start mine soon! :)
What happens if you don't make a filter as shown here and simply put the lid on? Will the trash can collapse or will the planer blower force the lid to pop off?
Great job as usual. I have the same planner, I have a bag attachment to catch the chips, but I notice that I get quite a bit of chips flying back at me as well. Is this normal?
Nice video, what about a shop vac filter placed upside down as a second filter on top . You will have a lot more surface area than a tee shirt and better air flow, shouldn't have to clean as much.
Yeah that's what I say every time I mangle my bench. Those poor bastards who haven't mangled their benches. There's a thread on woodtalkonline titled "What to do with your old workbench", the 4th post down has a picture of a workbench that looks more like a giant wasp nest or it was chewed out of a tree by beavers.
Excellent idea. I am actually looking to buy this planer myself but it's pricey. Did you find it somewhere on sale or just bought it? Agreed about the work bench, it's meant to be used and not look at.
i love this i was conceptualizing something similar for my shop as i usually have to sweep up the entire shop after planeing... Keep up the good work.. :)
Thts a good idea seems tobwork well for what its made of.. . So it's kind of like the cyclone but with no shopvac or cone? & Is it specifically for the 735 only or wiuldnit work on the 734.
could you find a similar furnace filter to do the same that way if it gets ruined by whatever you could just pop a new one in? and it might be better at keeping it clean and for cleaning the filter as well... also looks like you need to make a holder for the hose to keep it out of the path of the boards as they come of the planer. :) Keep up the great videos! :D
***** Why buy a filter when the one I made works fine? The hose was in the way because I had the can close to the planer to get it in the video. Moving the can further away piulls the hose out of the path.
The DeWALT planets have blowers in them to blow the wood hips away. On the one I built, instead of the mesh, I used a filter I bought off Amazon for a couple of dollars.
m.ade your dust collector . works just fine. made following changes 1) deleted the sreencloth used a piece of cloth. it lets the air out but not the dust thanksfor the plan.
We recently lumbered a 36" maple, a 36" white ash, and a 32" pecan. After drying, we tried planing with a Rigid (Home Depot) 13" planer with 2 HSS knives th-cam.com/users/postUgkxIzvvTi3_Qc8JnVdYYRJCvuoDC4QjTzeL . This job was clearly too much for that machine. The pecan was particularly difficult, due to heavy mineral deposits, and a sharp pair of HSS knives would be consumed by a mere 3 boards. We were also having lots of problems from chip bruising, due to poor dust collection. The shavings came off like straw and jammed in the 4" hose.We bought the DW735 simply to be able to run carbide blades, which worked brilliantly for the pecan. However, we found it to be a much, MUCH nicer machine. It was far more rigid than the "Rigid" planer, and far more accurate as well. But what I liked most about it was the dust feed. This machine has its own blower, which shreds the "straw" like shavings as they come off the cutting head and helps boost the shavings into the dust collection system. No more clogs! It's also nicely sealed so that the internals stay quite clean. This is just a well tempered machine that's a delight to use. It literally cut the labor in half. Just another example of getting what you pay for.
Rather than cutting a hole through the lid at an angle, you could cut a round hole straight through, put the pipe through a few inches, and cement an elbow or 22.5 to it.
I did pretty much the same with 4" hose. My change was no filter on the lid, but another 4" exhaust that I port outdoors (I'm in a rural area) in nice weather or into a pillow case when indoors. Thanks for the video!
I just got my Dewalt Planer, thanks so much for your no nonsense cost affordable chip and dust collector! Works Fantastic!
That was god-like use of a hole saw
Thanks for the video John. I have been watching your channel for some time now. I have the same planer and built a very the same type of can you have. And I must say that this a very slick set up. It catches all of the chips and dust. The only difference is I used a 4" hose. Again thanks for the videos. I am always looking for your new ones.
As to your fine dust filter, build a small wood framework over the hole big enough to stretch a pillow case over, they work AWESOME for filtering planer dust.
What thread count?
You are an artist with a whole saw!
He puts me to shame with a half a saw!
I have the same Dewalt planer and have been battling the chip / dust issue since day 1. Defiantly gonna try this. Thanks.
Great idea for dust collection. I am going to buy the Dewaldt planer also and needed this idea.
So did you make this?!
Well, now I feel bad about gluing the melamine chip I knocked off my jointer base back on. Lol. Way to cut down on hole-saw dance while going at that slanted hole. I’m still learning new tricks at 75 thanks to TH-cam and “real” guys like you. I subbed. Thanks!
I was thinking of buying a vacuum but seeing this video is going to save me a lot of funds. This Dewalt planer is absolutely amazing I don't regret buying. Great job 😁
Nice job! Now I have a plan for my planer chip collection. The storage on your wall holding the drill bits, very nice!
I love how real your build is, pretty awsome love it!
Great work there John, like how you drilled the hole in the top at an angle with a hole saw. Gives me some ideas on a project I'm working on. Thanks again!
I like the honesty when you make a mistake!
Cool project john. I am amazed that construction adhesive is so versatile
One of the most valuable videos for me that I've seen. I used the basic idea but with multiple modifications. Thank you.
What modifications did you make?
I used a food grade 30 gal barrel with the seperate top and clamp. It makes a perfect air tight seal and is easy to remove to empty. No messing around with making a top and the 4" holes cut easy.
Great video's....Great camera work and I love the way you discuss what you are doing and what you are thinking.
Bench dings equate to experience. You get better as dings accumulate.
Instead of the exhaust on the top put in another hose port on the side at the top of the can or another angled out on the top over at the edge of the cover and send that hose to a shop vac. The micron filter on the shop vac will get the fine dust and the added suction will help pull the chips out of the planer.
I use that same DW735 and it puts out more chips and dust than anything in my shop. I've put my shop vac hose on it and that seems to work very well. That model of planer really pushes out the chips but without suction (I've tried that) I get chips back down and it gets under my work and will cause sniping or uneven planing.
I like how you made the lid attachment.
Love the videos.
Gail Long Actually, bench dings equate to not caring. I can go out and beat the living hell out of it within an hour and I'll still have the same experience.The blower on the planer is strong enough to work in this arrangement, as demonstrated. No need to attach a shop vac.
Yep I have the Ridgid planer that also has vacuum assist; works fine without shop vac. I use a round duct with a sander bag attached to vent the container. I have my container setting on the mobile base under the stand planer rest on. Good video
This is a planer which puts out much less dust. than most shop tools. Mine uses a bag filter used with many shop vacs so no dust problem there. For others I used a shop vac with bag as it is sufficent for my uses and captures dust very well. Only dust I get is from hand sanding when I do it or machine which is fine and impossible to fully eliminate.Planer make more shaving to pickup so I want it contained for less cleanup.
That was the least amount of trouble with a hole saw I've ever seen.
That's a great setup. I was wondering if doubling or tripling the screen might work for the fine dust. Also I wanted to ask if using a trash can with the rubber lid it comes with would work instead of making that led.
I love it - simple, effective, efficient and uncomplicated. Well done man.
Pretty slick build!
AdventuresInDIY Thanks :)
I agree a clean work bench is a show bench great video.
Nice job, I need this filter system for my shop, thanks for the idea.
I wonder how much pressure the blower in that planer produces. With a small filter like that, you may need quite a bit of pressure to get enough airflow.
The 735 has a chip ejector velocity close to that of an F-14 after burner. It will inflate my Delta dust collector through 20 feet of 4" hose and an trash can separator.
Matthias Wandel that built in blower will throw small chips about 10 to 15 meters away if not collected.
maybe you have to test it to find out.
I agree. Furthermore, chip extraction does not equate linearly to dust extraction.
At all.
Yeah, I had to rethink my dust extractor/ Thien baffle setup as soon as I plugged it in. It literally blew the top of my collection bucket, proving it had far more blow than my extractor had suck.
I'm so glad I found your video! Great job!
I was surprised when the hole saw worked the way it did. Good job
Thanks for this John. I was searching for a quick, easy solution & yet again you’ve delivered!
Simple, efficient solution to a common problem. I like it!
I like your style. You get in , get after it and get out......no bull shit.
What if you were to use like a car cabin filter vs. the screen and cloth? Would that cause too much restriction?
A home AC filter would work as well for the fines. You could get four of them out of a single 20" x 20" filter too.
In my case, I half filled a drum with water then directed the flow of dust to the bottom with a 4" diameter pipe with several holes on its sides near the bottom.
In this way, the fine dust particles are soaked and sink to the bottom. The shavings are pushed out at the bottom. I left a gap of 6" between the bottom of the drum and the pipe.
Nice. A similar solution is to cut two large holes in the plastic lid of one of those animal stopper garbage cans (the ones with the hold down straps). You can cut out about 2/3 of the lid without any structural issues. Then seal off the top of the garbage can with a fairly fine cloth (even better if you sew in draw strings) and have a reinforced hole to pass the hose through. Clamp on the lid and you are ready to go. No fine dust gets out and it allows for lots of air flow. I did end up eventually wrapping copper wire around the lid and hose and grounding it at the planer when I got tired of being shocked.
just wondering, could you connect a shop vac to the exhaust of the bucket to really catch all the dust?
Thanks for sharing this. Going to build one week.
Having the same dewalt 735, I think I'll have to go invest in a garbage can, some 2 inch hose and a few parts. I'm currently using a vacuum, but the filter gets blocked in 2 or 3 7 meter boards. Tapping the filter looks like a great idea to me.
I built a version of this model using a 55 gallon drum with a secure ring to hold the lid on. I cut an 8" opening for the screen vent. For the hose from the planer to the barrel I'm using 3" dryer vent tubing. Works ok but I'm getting chip blowback into the planer. Any thoughts on what could be causing that? I'm thinking the 3" hose may be the culprit.
3 inch do you mean 4 inch
Btw: What is the PVC tube running down your workbench intended to do?
I have a showbench at home ... the one in the living room called dining table with only one accidential drill hole in it. Cool wording!
It looks like you are trying to drill the worlds largest pocket hole when you are making your hose port. I always kick myself when I manage to damage something. Keeping things looking nice is ok, but at the end of the day function is more important than form if you want to get things done. Great project.
Great to watch and just what I need for my Dewalt 733. Like your style and thanks for the vid.
Wow John, that's a dandy. I think I could make one of those for my shop. Thanks.
Absolutely amazing work with that hole saw I will remember it, love the simplicity of the design - it works- problem solved - next ?
I've had a hard time figuring out what vacuum hose adapter(s) I need to connect my shop vac's 2.5" hose end to this planer. Any tips?
nice John. Like the pull out for th planner
did you use a Shop-Vac to suck up the dust into the garbage can or did you just let it blow into the trash since it has a blower
Good job with that hole saw!
looks pretty good. Definatly need something like this. Thinking I may use a shop vac as well for the fine dust but your uses only one appliance and, hence, less electricity. I`m on the fence. Thanks for posting.
I did something very similar but instead of a screen I used a air filter used for small air vents and it works great. Anyway great video!
what about trying a wool fabric like some of the dust filters use? its got fine fibers that catch the little dust particles and you don't want to shake it you want it to build a cake inside the filter.
Just a thought.
Simple and effective...about as good as it gets. Nice job.
Best Wishes, Brendan.
What did you use to attach the hose to the planer? I made up a connector by heating up a PVC fitting (to get it to fit OVER the DW735 outlet. I was connecting to a 'standard' 'ShopVac' hose.
Always love the chuckles!
Great video. I admire when someone uses their brain to create something rather than just go and pay for someone else's idea. A question about the planer, I have a DeWalt but not your model. I have the DW734 and I was told your model has a built in fan to expel the wood chips and mine does not. I was wondering if your project would work for me? I have a shop vac connected to a Vortex Dust Right Seperator and with my 21/2 in. hose, I have lots of chips clogging and not expelling from the Planner. What do you think? Thanks, Robert
Do you think this could work for the previous model 734? Whereas it doesn't have the blower inside the unit
love this makes me want to do my own project later
I watched a lot of vids, took these guys days, time lapse, but you could say they put the effort it takes NASA to build what you did so fast and easy. Do you know how much you put the others to shame showing us how easy it really should be? I was laughing because you made it seem ridiculously easy! Still laughing as I write this! GOOD JOB, well don sir, well done!
With your final filter I think you will be really surprises as to how much dust is really floating in the air (this is the dust that is really harmful), Just looking around in the shop you will not be able to detect the fine dust that is in the air. For much more effective dust collection build the Thien tophat, connect it to your dust collector and use 4" pipe rather than the 2".
i like this set up john
Nothing short of Genius! Thanks!!!!!!
i like how you cut the angled hole with the hole saw
Just for info. The Ridgid planer also has a fan assited chip blower built-in.
Thanks John - Loving your videos.
Looks great. I like how you show all the steps that go into the process, including the ones that don't work and then the adjustments you make to make it work. Do you have plans for a little extension table to catch the wood as it comes out? Sadly my Makita does not have the chip blower motor - they need to steal that idea.
Scott
Simple and effective. Well done.
This is solely from the out put from the planer port? I've heard (and just read somewhere...not doubting you lol) that if you don't have something pulling air, it will clog...clearly not the case! Thanks for the tip, gonna start mine soon!
:)
What happens if you don't make a filter as shown here and simply put the lid on? Will the trash can collapse or will the planer blower force the lid to pop off?
John another great build as usual. I wonder if a shop vac was attached to the dust collector would it work on a cabinet table saw as well?
I wanted to say. Way a Screen and Not a hole for the shopwac. But it works so its cool. Very nice.
Great job as usual. I have the same planner, I have a bag attachment to catch the chips, but I notice that I get quite a bit of chips flying back at me as well. Is this normal?
I get chips back even attached to a dust collector
Nice video, what about a shop vac filter placed upside down as a second filter on top . You will have a lot more surface area than a tee shirt and better air flow, shouldn't have to clean as much.
Yeah that's what I say every time I mangle my bench. Those poor bastards who haven't mangled their benches. There's a thread on woodtalkonline titled "What to do with your old workbench", the 4th post down has a picture of a workbench that looks more like a giant wasp nest or it was chewed out of a tree by beavers.
+krtwood When mine get's too full of drill holes, I just glue dowels in them and trim off. Just like new.
Excellent idea. I am actually looking to buy this planer myself but it's pricey. Did you find it somewhere on sale or just bought it?
Agreed about the work bench, it's meant to be used and not look at.
i love this i was conceptualizing something similar for my shop as i usually have to sweep up the entire shop after planeing... Keep up the good work.. :)
Genius bro! 👌
What diameter hose works with the DW-735 planer?
Well deserved thumbs up.
Thts a good idea seems tobwork well for what its made of..
. So it's kind of like the cyclone but with no shopvac or cone? & Is it specifically for the 735 only or wiuldnit work on the 734.
Joe Walters Only works with this planer - it has a blower built in.
I Build It ahhh..I see...I bought mine "spur of the moment."I knew I should have waited and saved a bit more...its 13 inches thiugh right?
could you find a similar furnace filter to do the same that way if it gets ruined by whatever you could just pop a new one in? and it might be better at keeping it clean and for cleaning the filter as well... also looks like you need to make a holder for the hose to keep it out of the path of the boards as they come of the planer. :) Keep up the great videos! :D
***** Why buy a filter when the one I made works fine? The hose was in the way because I had the can close to the planer to get it in the video. Moving the can further away piulls the hose out of the path.
thanks for sharing your video. It's been very helpful to me.
The DeWALT planets have blowers in them to blow the wood hips away. On the one I built, instead of the mesh, I used a filter I bought off Amazon for a couple of dollars.
is it PL400 you use as glue ? nice job by the way :)
m.ade your dust collector . works just fine. made following changes 1) deleted the sreencloth used a piece of cloth. it lets the air out but not the dust thanksfor the plan.
We recently lumbered a 36" maple, a 36" white ash, and a 32" pecan. After drying, we tried planing with a Rigid (Home Depot) 13" planer with 2 HSS knives th-cam.com/users/postUgkxIzvvTi3_Qc8JnVdYYRJCvuoDC4QjTzeL . This job was clearly too much for that machine. The pecan was particularly difficult, due to heavy mineral deposits, and a sharp pair of HSS knives would be consumed by a mere 3 boards. We were also having lots of problems from chip bruising, due to poor dust collection. The shavings came off like straw and jammed in the 4" hose.We bought the DW735 simply to be able to run carbide blades, which worked brilliantly for the pecan. However, we found it to be a much, MUCH nicer machine. It was far more rigid than the "Rigid" planer, and far more accurate as well. But what I liked most about it was the dust feed. This machine has its own blower, which shreds the "straw" like shavings as they come off the cutting head and helps boost the shavings into the dust collection system. No more clogs! It's also nicely sealed so that the internals stay quite clean. This is just a well tempered machine that's a delight to use. It literally cut the labor in half. Just another example of getting what you pay for.
Just got a new Dewalt planer. I plan on using your idea to collect the dust.
what brand of adhesive did you use?
That worked well.
Good enough for me. Like the video thanks for sharing.
great setup. an old gas furnace filter would be a great filter.
What’s the glue you’re talking about for melamine?
Rather than cutting a hole through the lid at an angle, you could cut a round hole straight through, put the pipe through a few inches, and cement an elbow or 22.5 to it.
so you don't use any other collection than the planer itself to get the chips in the can? I
And no electric vacuum cleaner attached?
Is it Liquid Nail that you were referring to?
How about a small disposable HVAC filter?
Nice job! so what model is your planer? tks
Since I have one like this I can tell you it's a DeWalt DW735
Great idea, man .
L.ZACCARO
Brilliant!
Does this work with the table saw and other shop equipment?
+Ed Salva Not likely, The DeWalt DW735 planer has a built in blower. Table saws and most other equipment don't.