Amazing!!! Thank you soooo much for putting this together. It’s is very very helpful and informative. I’ve got my first ELRS TX module and Receiver updated and bound. Thanks again, You’re the man!!
Thank you for dropping the "update the lua script for major version updates" tip 👍. Have to update the Zorro from 2.7.0 and it's taken all day to troubleshoot multiple issues.
I had an issue with lua not working, it was fixed by going into the Micro TX menu and setting 333hz, instead of 500hz. Just in case anyone else is having the same issue. This is with an TX16S and a Beta FPV Micro TX 500mw unit.
I got the RM Pocket and i am in austria europe and i got this ce eu version where the radio is going only to 100mw not to 250mw. I have 2 questions ! 1 . Is 100mw enough for me *( i fly around 100-300m maxilum away from where i am standing in the woods is 100mw enough if not do i have just reflash the software with the ISM version and can i use it in europe too. 2. Do i need more than 100mw 250hz ?
Thankyou for all your videos, I have restarted the hobby after a few years lay off and getting to grips with RM TX16S and (plug in) ELRS module, I have just obtained a RM ER6 receiver (for fixed wing) and have worked out I can remove CH 5 (arming) and reassign CH aux6 to output 5 (and etc with further channels)of the receiver is this wise? seems to allow full proportional use of all receiver ouputs. Your time much appreciated. Maybe a further video 🙂 Great work thanks again.
@@Painless360 Thankyou for that I should have known you were ahead of me 🙂 , I will endeavour to look harder at your back catalogur in future, thanks for taking the time to reply and keep up the good work.
super video as always....i bought an elrs version of the TX16s and you answered my question because if i go into the model setting i can select only multi and then elrs from there as a side menu...but when i go back into the radio menu and select elrs it hangs.....i am thinking although it says elrs on the underneath of the radio that perhaps the board is a 4 in 1 board....any other way of checking or a fix? i never get any csrf option available, thanks
@@Painless360 funny thing is it is an ELRS version of TX16s and has it stamped on the box and also on the underneath of the tx itself stating Model: TX16S ELRS....but must have the wrong board inside..perhaps a factory mistake. I have highlighted it to the shop as its only 28 days old (only tested it out last week and got confused). Thanks for your help as i would have been left struggling due to the fact i am new to Radiomaster.
Thank you. I get loading error. Which Lua script should I use? I updated my Radiomaster Pocket and Radiomaster Nomad external module. Both of them generate Lua scripts. The question is: which Lua script should I put in my radio controller?
I can't remember who it was, but someone posted a video on updating ELRS, and I thought they showed the radio (or receiver?) connected to their home WiFi. Does ELRS not support this, where you can either use it in access point mode and connect directly to the module, or you can input your WiFi credentials and it'll just connected to your home network when it powers on if you're at home?
You can flash the ranger while it's plugged into the Radiomaster TX16S, and 2) although my ranger is connecting to the ELRS receiver on the drone, Qgroundcontrol does not recognize it. The Radiomaster shows all the bars, the connection is good, Qgroundcontrol is telling me to plug the radio in.
Amazing!!! Thank you soooo much for putting this together. It’s is very very helpful and informative. I’ve got my first ELRS TX module and Receiver updated and bound. Thanks again, You’re the man!!
Fantastic tutorial, Lee! Thanks a bunch!!! 😃
Stay safe there with your family! 🖖😊
Thank you for dropping the "update the lua script for major version updates" tip 👍. Have to update the Zorro from 2.7.0 and it's taken all day to troubleshoot multiple issues.
Thank you for this video Lee! I still use mostly crsf, but elrs is much cheaper & I start using it too.
I had an issue with lua not working, it was fixed by going into the Micro TX menu and setting 333hz, instead of 500hz. Just in case anyone else is having the same issue.
This is with an TX16S and a Beta FPV Micro TX 500mw unit.
I asked the same question thank you for answering and simplifying all of my problems
I got the RM Pocket and i am in austria europe and i got this ce eu version where the radio is going only to 100mw not to 250mw. I have 2 questions ! 1 . Is 100mw enough for me *( i fly around 100-300m maxilum away from where i am standing in the woods is 100mw enough if not do i have just reflash the software with the ISM version and can i use it in europe too. 2. Do i need more than 100mw 250hz ?
Thankyou for all your videos, I have restarted the hobby after a few years lay off and getting to grips with RM TX16S and (plug in) ELRS module, I have just obtained a RM ER6 receiver (for fixed wing) and have worked out I can remove CH 5 (arming) and reassign CH aux6 to output 5 (and etc with further channels)of the receiver is this wise? seems to allow full proportional use of all receiver ouputs. Your time much appreciated. Maybe a further video 🙂 Great work thanks again.
th-cam.com/video/h7YAMw8OIsM/w-d-xo.html 😁
@@Painless360 Thankyou for that I should have known you were ahead of me 🙂 , I will endeavour to look harder at your back catalogur in future, thanks for taking the time to reply and keep up the good work.
super video as always....i bought an elrs version of the TX16s and you answered my question because if i go into the model setting i can select only multi and then elrs from there as a side menu...but when i go back into the radio menu and select elrs it hangs.....i am thinking although it says elrs on the underneath of the radio that perhaps the board is a 4 in 1 board....any other way of checking or a fix? i never get any csrf option available, thanks
That sounds like an MPM version. It should say on the box... best of luck
@@Painless360 funny thing is it is an ELRS version of TX16s and has it stamped on the box and also on the underneath of the tx itself stating Model: TX16S ELRS....but must have the wrong board inside..perhaps a factory mistake. I have highlighted it to the shop as its only 28 days old (only tested it out last week and got confused). Thanks for your help as i would have been left struggling due to the fact i am new to Radiomaster.
just an update on that....i went back to the dealer in the uk and they said the following: System page 6 - change module type to CRSF.
I'm glad to hear that you got it sorted. That may be worth a quick tip video... Happy flying!
th-cam.com/video/010bECugXJo/w-d-xo.html
Thank you. I get loading error. Which Lua script should I use? I updated my Radiomaster Pocket and Radiomaster Nomad external module. Both of them generate Lua scripts. The question is: which Lua script should I put in my radio controller?
The LUA script is the same for both... best of luck
@Painless360 Thank you for responding. the fact that Nomad is dual band transmitter has no affect on LUA script?
No
@@Painless360 thanks for the clarification.
I can't remember who it was, but someone posted a video on updating ELRS, and I thought they showed the radio (or receiver?) connected to their home WiFi. Does ELRS not support this, where you can either use it in access point mode and connect directly to the module, or you can input your WiFi credentials and it'll just connected to your home network when it powers on if you're at home?
You can save your WiFi name and password to the ELRS stuff. Best of luck
You can flash the ranger while it's plugged into the Radiomaster TX16S, and 2) although my ranger is connecting to the ELRS receiver on the drone, Qgroundcontrol does not recognize it. The Radiomaster shows all the bars, the connection is good, Qgroundcontrol is telling me to plug the radio in.
See my video on setup for CRSF on ardupilot... Best of luck
Can I use the module with the tx16s 4in1?
Yes
how can i make multiple receiver and a single transmitter?
Please make sure you are subscribed. th-cam.com/video/3q5KTM7IGI0/w-d-xo.html