Thanks for making this video. I just got this exact model delivered a hour ago, and as you pointed out, the installation instructions are rubbish and confusing - hence me seeking out this video. I also did not get a salt funnel, but unlike other comments, my instruction don't seem to refer to one.
I have literally just installed mine as our old one needed to be replaced. To be honest, I only searched YT to see if I was missing a salt filler funnel but although the instructions show one, we did not get one with the machine, I have to assume this is normal. Thanks for sharing the video.... 👍
Ho handy video , we ha e exactly the same dishwasher. And found that on the first few washes and bit of a hot plastic smell, just wondering if you had the same. Hopefully the smell will go in time.
Very good! We got exactly the same washing machine. Not sure why the instruction shows a water filter but in the UK, we didn't get any water filter on the inlet. Any comments on this will be appreciated?
I have bought this dishwasher but there was no previous dishwasher installed so I am trying to work out what I need to connect it - all I have with it is the water supply pipe which needs to be connect to the copper pipe, there is a flexible hose attached to the lower pip further down so assuming I can put in a t-piece of some kind? And then what fittings would be needed to attach to the dishwasher supply pipe? Also under the sink the waste pine has no appliance outlet so need to replace this, which is fine but what drain hose would I need?
This link gives a very good explanation of the plumbing alterations you need to make before you install a dishwasher. www.homebase.co.uk/ideas-advice/kitchen-and-bathroom/kitchen-fitting/install-a-dishwasher-or-washing-machine/ Every house is different but this shows you how you can T off the cold water supply and how you can connect the drain. If you are unsure of exactly what you need, I would take a photo and measurements of your current plumbing down to a local plumbing supplies specialist and they should be able to advise you and supply everything you need.
Hi,I've just received the same dishwasher today,and I was wondering if you know what that strip is used for,the one you took out of the dishwasher, I've looked at different videos and don't know if it's a spare or whatever 🤔, also do you have to connect your dishwasher to the Internet or can you just e8n it as normal without the need for that app,thanks in advance..
Hi Karen, The plastic strip is only needed if you have to take the top of the machine off to get it under your worktop. You can then use it to fill in the gap. Most people won't need it. It's the same with the app. If you want to start your dishwasher remotely then you might want to use the app. I fill mine up and turn it on using the start button 🙂
@Big Ted's Home & Garden thankyou for getting back to me about the questions I asked,so just to clarify you can use the dishwasher as normal without having to install the app,I would only be using the dishwasher when I'm at home..its not an actual requirement to download the app..?
@Karen Farr Hi Karen. I did download the app but apart from checking that it had connected to the dishwasher, I have never actually used it. I'm pretty sure that you don't have to download the app and can just use the machine on manual.
we just installed it and it leaves water at the bottom after every cycle.. there si no drain blockage and obviously filter is clear as it was for the first cycle
Check that the drain hose is not kinked when you push the dishwasher into place. A glass or two of water left in the machine is not unusual but if there is more, I would contact Bosch for advice. If the dishwasher is new, it will be under warranty. Good luck!
Hi Michael, I believe that the grey plastic strip attachs to the top of the dishwasher to form a seal if you have to remove the top of the dishwasher to fit it under the worktop.
I have just bought this and had it installed tried the first cycle ever and dishes came out cold not heating up anything? Everything is connected from what I can see ? Any ideas 💡
The white strip I think you are referring to is used to seal between the dishwasher and the worktop. You only need to use it if you are removing the top of the dishwasher. Most people don't do this unless they have to.
Dishwashers are normally cold water feed only. I would suggest you contact Bosch first if you want to try running your machine off your hot water supply.
That doesn't sound good! This might help www.bosch-home.co.uk/customer-service/get-support/dishwashers/door-problems I can't see a child lock on mine though. Is it a new machine?
Is it grey and about 4 inches in diameter? If it is, then it is the salt container lid. The salt container is inside the machine, on the bottom towards the front left as you look into the dishwasher.
@@bigtedshome He 'might' be referring to the Baking Sheet Spray head, otherwise known as the 'Large Item Spray Head'. We got one in our Serie 4 Bosch and it goes in the back of the dishwasher with the upper basket taken out. It's all in the instructions. :)
![[Live] : ONE 168 วันนี้!! "โจนาธาน vs ซุปเปอร์เล็ก"](http://i.ytimg.com/vi/0jIN65KgJsI/mqdefault.jpg)
Thanks for making this video. I just got this exact model delivered a hour ago, and as you pointed out, the installation instructions are rubbish and confusing - hence me seeking out this video. I also did not get a salt funnel, but unlike other comments, my instruction don't seem to refer to one.
Thanks Bob 👍
You could use any funnel if the tube has a large enough diameter but it's easy enough to pour salt straight from the box or bag anyway.
Great video, clear and concise. Just what I was looking for. Thanks!
Thanks June 🙂
I have literally just installed mine as our old one needed to be replaced. To be honest, I only searched YT to see if I was missing a salt filler funnel but although the instructions show one, we did not get one with the machine, I have to assume this is normal. Thanks for sharing the video.... 👍
Thanks Old Hobbit 👍 I didn't get a funnel either 🙂
Thanks you. I have just bought one and your video answered my questions especially about what the grey strip is for. 👍🇬🇧
Thanks Josie 🙂
Ho handy video , we ha e exactly the same dishwasher. And found that on the first few washes and bit of a hot plastic smell, just wondering if you had the same. Hopefully the smell will go in time.
Thanks Dan 👍 We haven't had any issues with plastic smells. I hope your problem resolves itself quickly 🙂
Great video. Thanks.
Did you need to remove any transit bolts etc?
No, I'm sure I didn't. I would have shown them in the video if there were transit bolts.
Very good! We got exactly the same washing machine. Not sure why the instruction shows a water filter but in the UK, we didn't get any water filter on the inlet. Any comments on this will be appreciated?
Thanks for the feedback 👍 I didn't get a water filter either. I assume it's because mains water in the UK doesn't need one.
Yes the picture of a water filter threw me too.
I have bought this dishwasher but there was no previous dishwasher installed so I am trying to work out what I need to connect it - all I have with it is the water supply pipe which needs to be connect to the copper pipe, there is a flexible hose attached to the lower pip further down so assuming I can put in a t-piece of some kind? And then what fittings would be needed to attach to the dishwasher supply pipe? Also under the sink the waste pine has no appliance outlet so need to replace this, which is fine but what drain hose would I need?
This link gives a very good explanation of the plumbing alterations you need to make before you install a dishwasher. www.homebase.co.uk/ideas-advice/kitchen-and-bathroom/kitchen-fitting/install-a-dishwasher-or-washing-machine/
Every house is different but this shows you how you can T off the cold water supply and how you can connect the drain. If you are unsure of exactly what you need, I would take a photo and measurements of your current plumbing down to a local plumbing supplies specialist and they should be able to advise you and supply everything you need.
Brilliant
Thanks Bill, I'm glad you found it useful 🙂
Hi,I've just received the same dishwasher today,and I was wondering if you know what that strip is used for,the one you took out of the dishwasher, I've looked at different videos and don't know if it's a spare or whatever 🤔, also do you have to connect your dishwasher to the Internet or can you just e8n it as normal without the need for that app,thanks in advance..
Use
Hi Karen, The plastic strip is only needed if you have to take the top of the machine off to get it under your worktop. You can then use it to fill in the gap. Most people won't need it. It's the same with the app. If you want to start your dishwasher remotely then you might want to use the app. I fill mine up and turn it on using the start button 🙂
@Big Ted's Home & Garden thankyou for getting back to me about the questions I asked,so just to clarify you can use the dishwasher as normal without having to install the app,I would only be using the dishwasher when I'm at home..its not an actual requirement to download the app..?
@Karen Farr Hi Karen. I did download the app but apart from checking that it had connected to the dishwasher, I have never actually used it. I'm pretty sure that you don't have to download the app and can just use the machine on manual.
@Big Ted's Home & Garden thankyou ted,I would rather just use it manually myself,thanks again..🙂
we just installed it and it leaves water at the bottom after every cycle.. there si no drain blockage and obviously filter is clear as it was for the first cycle
Check that the drain hose is not kinked when you push the dishwasher into place.
A glass or two of water left in the machine is not unusual but if there is more, I would contact Bosch for advice. If the dishwasher is new, it will be under warranty. Good luck!
What is the seal for please - I don't intend to remove the top so is it surplus to requirements ?
Yes, you only need it if you have to remove the top.
@@bigtedshome Thanks for replying - the instructions are useless
Hi, Please what is the grey plastic strip for that you took out of the machine. Thank you
Hi Michael, I believe that the grey plastic strip attachs to the top of the dishwasher to form a seal if you have to remove the top of the dishwasher to fit it under the worktop.
I have just bought this and had it installed tried the first cycle ever and dishes came out cold not heating up anything? Everything is connected from what I can see ? Any ideas 💡
It sounds like either the element or thermostat are faulty. I would contact the store you bought it from and ask them to fix or replace it.
Hi! I received two of those white strips with my machine... Where do they go? Thanks!
The white strip I think you are referring to is used to seal between the dishwasher and the worktop. You only need to use it if you are removing the top of the dishwasher. Most people don't do this unless they have to.
Does it matter if you don’t remove the drain hose bracket from the back?
Not really, the worst I can think of is that it might rattle a bit while the machine is running but it's not going to harm anything.
Hi what did you do with the rubber strip please
If ok, I just read that Karen Farr asked the same question......great video so thank you
@@saabjohal2575 Thanks Saab 👍
are sir polothin baad me nikalna thi apko some time baad jab wo kharab dikhti to
Thank you for commenting. Unfortunately I have not been able to translate your message using Google translate.
Can we connect to the hotwater(red)?Thanks
Dishwashers are normally cold water feed only. I would suggest you contact Bosch first if you want to try running your machine off your hot water supply.
@@bigtedshome Thank you I give them a call
Dishwasher works better when heating its own water. Just connect to cold!👍🏼
we have the same brand... but we cant even open it?`???
That doesn't sound good! This might help www.bosch-home.co.uk/customer-service/get-support/dishwashers/door-problems
I can't see a child lock on mine though. Is it a new machine?
@@bigtedshome First time you open the machine u have to pull it hard. didnt know that ;P thanx for trying to help tho ;))
@@episodepk No problem, I'm glad you've sorted it out 🙂
Where dose the round bit goes
Is it grey and about 4 inches in diameter? If it is, then it is the salt container lid. The salt container is inside the machine, on the bottom towards the front left as you look into the dishwasher.
@@bigtedshome He 'might' be referring to the Baking Sheet Spray head, otherwise known as the 'Large Item Spray Head'. We got one in our Serie 4 Bosch and it goes in the back of the dishwasher with the upper basket taken out. It's all in the instructions. :)
@@curtismantle Thanks Curtis 👍