This is honestly the content I live for. Cheap broken Bimmers being fixed and getting a bargain but it is a gamble and you could loose your shirt or you could get a badass car for cheap. Let's Go!!!
Gotta remove the spark plugs when you turn it over by hand, do a compression and leak down test. You may not need a motor. If it was seized it wouldn’t move at all
Erlon is the perfect co host hella knowledgeable... I haven't watched the channel in a while but if Erlon is gonna be here more, I'm hype for more content with you two
Dude, you left the plugs and coils in when you tried to turn it manually. Its going to be hard af to turn an engine with them in because youre manually compressing the air inside the cylinders. If the engine blew it would likely be much easier to rotate the engine by hand (depending on how/what failed). You can also check the oil for metal to help confirm that. Additionally, you can use a boroscope to check the condition of the cylinders visually. If theres significant damage then thats also a good sign your engine is bad. you should try these steps again because, otherwise you could be buying a new engine to replace a functioning engine. And just a hypothesis, It might be a bit easier to turn the 328's engine because the it hasn't been sitting for a long period of time so there's likely more lubrication on the cylinder walls. It also would be a good idea to check that the alternator is actually bad. Buying an engine is expensive, and these checks are cheap, just trying to save you some money.
sincei its a N55 i can just about guarantee you its a engine, hate to break it to you but when you put a bigger turbo on those motors they can just blow out of nowhere, THE Kbb on those is about 18 with mileage like that so if you paid 12 and spend 5 more for the engine your back to square one so i suggest you look on ebay or a local salvage yard,, paid 3500 for mine when i bought a 335i n55 w a blown engine
100% check the dme pins for corrosion same type of no start/weak crank on my e90. Needed a new ecu and fixed the issue. Threw codes and warnings for drivetrain as well. Good luck!
Great bmw. Awesome content again. Liking the tool kit. I was worried seeing that smoke appear. Starter motor? This will be phenomenal once rectified. UK can’t wait. 🇬🇧🇬🇧🇬🇧
I met you at the local car wash once with my 535i. I bought a couple months ago a 650i and love it! It’s the gran coupe and has nice performance. CONGRATZ on that purchase and can’t wait to see what’s next.
same thing happened with my 535, Check the grounding in the engine bay etc, mine was fine and then all of a sudden stopped running, and was turning over like yours ...
my e36 325i convertibles starter did the same thing.. it just started smoking after trying to crank it for a while.. and removing it seems impossible for me to do by myself cause of the tools i have. its still in the car and its been 2 months..😅
Wow, always thought the F13 had beautiful lines. Your lucky you got the N55 version, that will be way more reliable than N63. Hope you find a motor. Great find with those mods too. How will you pass next inspection date with catless dp's though? Did seller give you the original dp's?
@@sivasli245858 It will with the crazy power the previous owner was trying to get out of it, but still way more reliable and less costly to maintain than an N63.
Before buying new engine try this i had a f10 and i had the same issue the car did not want to start at all went to loads of garages couldn’t find the problem because there was no code etc, changed starter motor made no difference, i had a manual so it was a clutch switch sensor but for automatic its brake switch sensor i believe so every time you press start it cranks but doesn’t give enough power or whatever hope.. it sounds silly but believe me bro..hope everything makes sense 😂 just trying to help
Hey have you ever thought about rocking the buzz cut for a while? I just started rocking it an I’m really loving it especially for guys who have nice facial hair like you do!
The car is in neutral bro, so maybe you need to get it into park before it will try to start. But the way it clicks when you try to start it, seems like it doesn’t have enough power to crank the engine.
I have a quick question. Does the same engine with different drive train like rwd and awd matters? That’s what I heard if your car is rwd you have to get a rwd engine donor car
Bro my uncle has a 640 grand coupe it’s in beautiful orange it’s has 540 horsepower a full exhaust system and a beautiful set of weels and it’s flawless good luck with this one keep it up
Love the content bro 😂😂 literally i be looking up your name up everyday to see if u uploading , I’m literally waiting on the right bmw to flip for my first car
Watched the whole video. It sounds like a spun bearing. This is my thought. If you are to replace the engine anyway, it might be worth it to drop the subframe/oil pan and check out the bearing. If the crank isn't mangled, you may be able to "save" the engine, by replacing the bearing.
I have that issue came from not were parking at shopping Center and ending towing home after long researching the ground from engine to chasis snap try to boost directly from engine.
This is honestly the content I live for. Cheap broken Bimmers being fixed and getting a bargain but it is a gamble and you could loose your shirt or you could get a badass car for cheap. Let's Go!!!
Lose
@@TheGoldenTroutmaybe with this bmw unless he a master at swapping cars and even if u love it its still work n money
Gotta remove the spark plugs when you turn it over by hand, do a compression and leak down test. You may not need a motor. If it was seized it wouldn’t move at all
Yes that motor is not seized
The 6 series and 8 series are my favorites, gotta love the big body coupes
Erlon is the perfect co host hella knowledgeable... I haven't watched the channel in a while but if Erlon is gonna be here more, I'm hype for more content with you two
Dude, you left the plugs and coils in when you tried to turn it manually. Its going to be hard af to turn an engine with them in because youre manually compressing the air inside the cylinders. If the engine blew it would likely be much easier to rotate the engine by hand (depending on how/what failed). You can also check the oil for metal to help confirm that. Additionally, you can use a boroscope to check the condition of the cylinders visually. If theres significant damage then thats also a good sign your engine is bad. you should try these steps again because, otherwise you could be buying a new engine to replace a functioning engine. And just a hypothesis, It might be a bit easier to turn the 328's engine because the it hasn't been sitting for a long period of time so there's likely more lubrication on the cylinder walls. It also would be a good idea to check that the alternator is actually bad. Buying an engine is expensive, and these checks are cheap, just trying to save you some money.
Take the plugs out first and see if it spins freely.
It’s obviously not seized if you can spin the engine. Or even crank it over a bit.
hes right
just throw a new starter in
I have no Idea about engines, but could it be timing though? like somehow the timing chain got loose and stuck inside?
Lmao please give these guys some tips
sincei its a N55 i can just about guarantee you its a engine, hate to break it to you but when you put a bigger turbo on those motors they can just blow out of nowhere, THE Kbb on those is about 18 with mileage like that so if you paid 12 and spend 5 more for the engine your back to square one so i suggest you look on ebay or a local salvage yard,, paid 3500 for mine when i bought a 335i n55 w a blown engine
Facts!
I've drive a 650i before such a nice looking car and has good aftermarket support
Jamie’s Garage just did a video about this, it was a spun bearing
Take the spark plugs out. Turn it over see if it’s just hydrolocked.
100% check the dme pins for corrosion same type of no start/weak crank on my e90. Needed a new ecu and fixed the issue. Threw codes and warnings for drivetrain as well. Good luck!
Spun bearing Forsure that’s why it’s spinning then stops suddenly once the engine is rotating on the spun bearing side
Great bmw. Awesome content again. Liking the tool kit. I was worried seeing that smoke appear. Starter motor? This will be phenomenal once rectified. UK can’t wait. 🇬🇧🇬🇧🇬🇧
Whenever your ready to sell just know you have a buyer in Toronto Ontario Canada for it
Finally I said for the past year and a half every time you asked what shout be the next build and I always said the new 6series
I met you at the local car wash once with my 535i. I bought a couple months ago a 650i and love it! It’s the gran coupe and has nice performance. CONGRATZ on that purchase and can’t wait to see what’s next.
Rod bearings - check oil for metal shavings
sheeesh congrats on the 640i let's get it!!!!
640 love such a nice car when it’s modded thank you for choosing this body style
Guys try putting jumper cables from the engine to the Chassis. It could bei an bad Engineground. I had the same Problem in my N54.
Please take out the oil filter and inspect it for metal shavings🙏
all I have to say about reliabilty , maintenance is the most important part. a lot forget this
same thing happened with my 535, Check the grounding in the engine bay etc, mine was fine and then all of a sudden stopped running, and was turning over like yours ...
My would do that it was the cas system found out after replacing alternator and battery 😅😅
Please make more 6series videos thinking about getting one & there’s literally no videos on the 640i platform.
Great Video, Great Content...Where do you find engines? Trying to learn
I got the same problem with 2011 535I I hope you fix it and you know what is the problem
You have to replace the coils and spark plugs!
The bottom part of the engine is gone it happen to me aswell with my f10 basically you need a engine
my e36 325i convertibles starter did the same thing.. it just started smoking after trying to crank it for a while.. and removing it seems impossible for me to do by myself cause of the tools i have. its still in the car and its been 2 months..😅
The quickness on nour to get the hose when he saw the smoke 😂😂😂😂 you fast nour
more N55 action. I just got a 2007 BMW 530i for 500 bucks runs and drives jus some slight front end damage
no wayyy i saw this on sale in the facebook gc
Wow, always thought the F13 had beautiful lines. Your lucky you got the N55 version, that will be way more reliable than N63. Hope you find a motor. Great find with those mods too. How will you pass next inspection date with catless dp's though? Did seller give you the original dp's?
N55 also with rod bearing issues
I had to convince him but yea I got them 😂
@@sivasli245858 It will with the crazy power the previous owner was trying to get out of it, but still way more reliable and less costly to maintain than an N63.
@@steveb540i i had a 740i n54 bulletproof engine 300000 km never any engine issues
Before buying new engine try this i had a f10 and i had the same issue the car did not want to start at all went to loads of garages couldn’t find the problem because there was no code etc, changed starter motor made no difference, i had a manual so it was a clutch switch sensor but for automatic its brake switch sensor i believe so every time you press start it cranks but doesn’t give enough power or whatever hope.. it sounds silly but believe me bro..hope everything makes sense 😂 just trying to help
Nour Lowkey made ppl love the n54 and n55
Hey have you ever thought about rocking the buzz cut for a while? I just started rocking it an I’m really loving it especially for guys who have nice facial hair like you do!
Did you check the oil?
Probably needs turbos too
Seeing this makes me miss my 640 grand coupe
This gonna be my favorite build cuz I have a 640 grand coupe. 🦾🦾🦾 I need a lot of content on this.
The car is in neutral bro, so maybe you need to get it into park before it will try to start. But the way it clicks when you try to start it, seems like it doesn’t have enough power to crank the engine.
You can start the car in neutral
16:52 DAYYYUMMM
When power completely shuts off for some time it could be the battery plus cable issue
I have a quick question. Does the same engine with different drive train like rwd and awd matters? That’s what I heard if your car is rwd you have to get a rwd engine donor car
Yayyy love the coupe! Great purchase i hope this build gets farr
Bro my uncle has a 640 grand coupe it’s in beautiful orange it’s has 540 horsepower a full exhaust system and a beautiful set of weels and it’s flawless good luck with this one keep it up
What screen did he get? Have a 640i Gran coupe and have been looking for a new interface possibly with Apple CarPlay
Sup Boss. Did you ever find out what screen that was?
I’m getting that Vera tool kit too. 🔥🔥🔥
Oh yes looking good
That tool kit is dope
I was just thinking about upgrading my e92 to the 6 series 🤜🤛
Congrats nour. My dream whip is a Gran Coupe 640d can't wait for the upcoming videos
On the forums he said he did a donut and the fuel\oil pressure wasn't enough and the engine seized.
Common issue with n55
Nour my dad had an e38 which had the same problem he would go and it would turn off alone it was an electric problem
It’s the motor my 535i did the same thing
Two keys is a flex by it self🤣🤣💯
Sounds like a starter bro
I’m boutta buy one in mint condo can’t wait to work on it😈
Check and replace the earth cable.
Can be a loose main plus cable under the hood
How cool William Hung is in your video.
Love the content bro 😂😂 literally i be looking up your name up everyday to see if u uploading , I’m literally waiting on the right bmw to flip for my first car
What all BMWs does Nour own currently?
Fuel injectors might be bad
Replaced battery problem
Solved had this in both
My bmws
New Build - Let's goooooooo 💥
Yessir so excited for this build!!
crazy how bmw gave these things n55s when the b58s been out
ps talking about 640is made after 2016
Alternator hundred percent and you might as well change the battery
10:30 is thst a new build in the back 👀
Watch there be water in the satellite box of the car because it makes your i drive/navigation
Oh it’s the old 6 nice 👍
Entertaining bro! Liked it!
The engine is seized and you need a new short block, the way to test this is to physically try to crank the engine.
watch the vid next time
It's an auto will be hard to turn over put it N and remove the spark plugs
I like that tool kit
Thats a commes des garçoned logo haha dopeee
Should turn it over by hand before you try to start it
Or even do a oil change
Nice 👍🏽
Awesome. Thank heavens you got a 640i. No N63, phew. Higher chance of fixing it.
Watched the whole video. It sounds like a spun bearing. This is my thought. If you are to replace the engine anyway, it might be worth it to drop the subframe/oil pan and check out the bearing. If the crank isn't mangled, you may be able to "save" the engine, by replacing the bearing.
Does anyone know what kind of screen that is in the 640i ?
I want one for mine
Congratulations brother
The CDG heart 😂😂😂😂😂😂
lmaoo i peeped that too
Nice deal bro 🔥
Maybe dragging starter
You should of bought my 11' 550i clean title
Check the grounds
I have that issue came from not were parking at shopping Center and ending towing home after long researching the ground from engine to chasis snap try to boost directly from engine.
Try to rescue the engine I think the starter is not good anymore
I bet it's a power or bad module issue
rod bearing issue
voltage regulator sensor
Beautiful car!!!!
My Audi A4 was not wanting to turn on and the same smoke came out. It was the compressor that was causing that for my car.
It’s actually the starter because he keeps on trying to start the car and the starter gets hot and hot and hotter then burnt out
Well done 👏🏾
The 3.0d x5 e70 is the most reliable
If your timings off that means your engine locked up which means you’re feel injector got stuck open
Spun rod bearing
Check oil filter
Im pretty sure the previous owner got confirmation that the engine is toast before he unloaded it to you.
Yes for sure
he told him that anway so i think nour already knew
Check for metal shavings
Hey nour there is a iraqi guy called fadi koka he can fix any bmw no matter what i hope u check him out it might help with your future builds ✊