Here’s a mask idea. What if Jason never needed a replacement mask or new masks? Like, he kept the mask from part 3 and he’s kept it ever since. It’s the part 3 mask, but it has all the damage from all the movies, axe wound, machete slash, gunshot, rock damage, motor boat damage, split, etc etc. if you could do that, that would be a cool idea. Could possibly be hard though
I've loved watching your mask making over the years, and dude your attention to detail and going the extra mile to make these masks 110% has always been evident and especially here. When a mask doesn't have all that much detail on how to look or a blank isn't quite up to par, you knock it out of the park! That craftsmanship has kept me coming back for every new video! We used to cruise around in the Fall on our Halloweekend trips to the 'Rusted Metal' video with all the mask making noises because my 3 year old son loved it (he was so pumped when I told him you completed the whole song), and "He's a Killer" is still part of our October roadtrip music traditions which my son still asks for it every time. Fan for life! I like these mask making videos just as much as I love the movies...maybe even more at this point! Never freakin' stop bro!
I like this mask can you wanna send it to me in the mail or something I live all the way past West Point pass it past West Point oh my number is 393 Virginia Rd. and then OK well it does a giant giant driveway you go down you go down the road and then you’ll see 393 and let’s drive down now and it’s not gonna door ring the doorbell OK bye
Man you always have the most creative ideas for weathering and painting. Shaping it over a stove and using adhesive for corrosion is something I would never think of. And burning the chevron? That's amazing.
Looks awesome! I made this one a while back and sent a pic that you included in your fan masks video. Definitely my favorite of the movie replicas to make. Your videos are what encouraged me to do my own, so keep up the good work!
10:55 I 100% agree. as an experienced mask maker nowadays,its VERY important to add extra details to make higher quality masks.When i was an amateur mask maker,my friends would ask for something as a souvenir,and id give them unsanded,minimal damaged masks.the only complaints i get from my friends when i make them masks these days is Overdetailing.i chip paint off,add unnecessary damage and texture.when you fall into the rabbit hole of quality masks,you overdetail simpler masks like Pt5.They just look to basic,so i might dirty up,add damage,scrape paint off,and even texture them
If you want glass-smooth clear coat, try out 2k clear coats. They're more expensive, but it really gets a glass-like finish. Also, have you tried a heat gun instead of the using your stove burner?
While watching this awesome video, I got an idea - what if you used Vanta-Black, the „blackest black”, for a special hockey-mask-design? I heard it completely absorbs light, making it look almost unreal.
Hey bro I made a song with you long time ago. This was back in the days I mean like years back. It was called "keep acting" from the west all the way to the third coast. It'd good to see you doing good on this platform and it's cool to see you still spitting some bars.
the mask really looks like from the movie and the darkness has a cool thing that makes me wonder of he got shot with a gun 🔫 🤔 and it is really hard for you , you did a great job making this 👏 👍 🙌 👌 💙
Just found your channel. Didn't really know there were that many people out there making masks probably because we have a gaming channel so it never dawned on me to dive outside that. I have a video coming out on Friday (tomorrow) and I think you'll be pretty surprised what I can do with a $2 mask from Walmart that essentially looks like a frisbee with holes. That's if you feel so inclined to check it out. With 4 cameras, slick editing and the fact that I'm a chick in a fairly male dominated space I think I hold my own. Anyways, thanks for pioneering the mask nation. Maybe we can do a mask-off in the future and let the community vote! Cheers from NB Canada!
Big Hush back at it again. Great job with this one man. Also, where did you find the wheel point bit for your dremel? I can't find one anywhere except online. I really need one to go along the jagged edges for my masks.
Everybody has a Michael Myers mask and a Freddy Krueger mask but those masks are very specific the cool thing about Jason is he sports a basic hockey mask
Good Video I love the Mask design👍🏻 But i have One question, why after the Uber Jason Mask video are you now explaining the video’s process ínstead of putting a text at the bottom of the screen as you did in the past videos?
i see on your previous video's that you leave most of the time the metal (buttons) on the bottem on it, can you not drill them out? i like to know i want to try one for myself.
Easier way: put the part 8 Jason mask in toxic waste for about 6 to 8 minutes, it works. But if you wanna touch it, just make sure to use gloves XD great video though subbed
Great mask again, bud. The toxic burns were starting to look like burnt sugar by the time you painted them... Maybe you should have tried that instead of the glue ;)
Hey man, I’ve been a subscriber for a decently long time and I just now got back to watching your videos after a bit. Missed watching you make these masks so much
i dont know how far in advance you may or may not film these but if youre gonna do another spirit halloween jason mask video id kinda like to see you fix up one of the other kinds of jason masks they sell
it might be interesting to see what you can do with that or maybe even one of the crappier looking masks that are more widely available around halloween
I'm definitely going to make another one soon, but it'll be the same starting mask as before. The only other one I've seen them sell is that little oddly shaped kind that I'm not personally crazy about. Sorry, I hope you'll still watch the new installment when it's up!
Mask Ideas: Anime Jason. I don’t watch anime but I know other people do and I think the style would be interesting. Tim Burton Jason. This pretty much explains itself. Xenomorph mask. Not sure how, but I think you could pull it off. Cyberpunk/steampunk Jason. Cute Jason mask. Like if it were a mask in a kids cartoon or something. Middle Earth Orc Armor Themed Mask. Infinity Gauntlet Mask. Actual metal mask. Stranger Things Upside Down Mask. Just a few Ideas I feel you’d enjoy and people would like.
I buy them in bulk from China. I also sell them in my Etsy Shop: www.etsy.com/shop/BigHushStuff Otherwise you can find them on Ebay and Amazon, but BE CAREFUL. All blank masks are NOT created equal. haha
Here’s a mask idea. What if Jason never needed a replacement mask or new masks? Like, he kept the mask from part 3 and he’s kept it ever since. It’s the part 3 mask, but it has all the damage from all the movies, axe wound, machete slash, gunshot, rock damage, motor boat damage, split, etc etc. if you could do that, that would be a cool idea. Could possibly be hard though
He already did it
@@nav7869 what’s the title?
@@Myers-Girl he’s talking about the part 7 split mask
I think that would be more damage than mask.
@@triple6wicked132 oh that’s not showing all the damage tho, wouldn’t touch the claw marks from Freddy for a start
I've loved watching your mask making over the years, and dude your attention to detail and going the extra mile to make these masks 110% has always been evident and especially here. When a mask doesn't have all that much detail on how to look or a blank isn't quite up to par, you knock it out of the park! That craftsmanship has kept me coming back for every new video! We used to cruise around in the Fall on our Halloweekend trips to the 'Rusted Metal' video with all the mask making noises because my 3 year old son loved it (he was so pumped when I told him you completed the whole song), and "He's a Killer" is still part of our October roadtrip music traditions which my son still asks for it every time. Fan for life! I like these mask making videos just as much as I love the movies...maybe even more at this point! Never freakin' stop bro!
I like this mask can you wanna send it to me in the mail or something I live all the way past West Point pass it past West Point oh my number is 393 Virginia Rd. and then OK well it does a giant giant driveway you go down you go down the road and then you’ll see 393 and let’s drive down now and it’s not gonna door ring the doorbell OK bye
@@DEVX108 why r u putting ur address in the comments- that’s stupid…
Man you always have the most creative ideas for weathering and painting. Shaping it over a stove and using adhesive for corrosion is something I would never think of. And burning the chevron? That's amazing.
Looks awesome! I made this one a while back and sent a pic that you included in your fan masks video. Definitely my favorite of the movie replicas to make. Your videos are what encouraged me to do my own, so keep up the good work!
It looks good out of the water but you can really see that realism in the water that really sold it for me bro. Awesome job 👍
10:55
I 100% agree. as an experienced mask maker nowadays,its VERY important to add extra details to make higher quality masks.When i was an amateur mask maker,my friends would ask for something as a souvenir,and id give them unsanded,minimal damaged masks.the only complaints i get from my friends when i make them masks these days is Overdetailing.i chip paint off,add unnecessary damage and texture.when you fall into the rabbit hole of quality masks,you overdetail simpler masks like Pt5.They just look to basic,so i might dirty up,add damage,scrape paint off,and even texture them
If you want glass-smooth clear coat, try out 2k clear coats. They're more expensive, but it really gets a glass-like finish.
Also, have you tried a heat gun instead of the using your stove burner?
wondering the same, if the gun would be enough the bend that plastic
@@ThePHoenixX99 it would be. If a heat gun can remove paint from bare metal, one would assume that it can melt plastic.
Probably one of the most underrated you tubers on the platform 💛
Just recently made 3 of my own jason masks..I really dig the glue idea and going to apply it..your stuff are totally wicked man🤘🏼💀🤘🏼
damn man this dude makes the best masks ever
i like the addition of a vo on this, it adds a bit more professionalism to the series
Love the video man, great work as always! Would be awesome to see a Joey Jordison style Jason mask as a tribute.
Thank you for putting my name in the intro when I was LanFN2187 WT, this means a lot to me. The mask looks sick, better than I imagined it would be
Woah dude! you have been at this for 6 years! Keep up the good work.
15 year i think
Love these DIYs, just made a variation of my own a few nights ago
Just wanted to let you know that you totally rocked this mask,awesome work💯💯💯💯💯
Would still love to see a really bloody freddy vs Jason mask, i think from one of the final fights its absoloutely covered, great work as always man
I love the new video style you did
Oliver
I don’t know about anybody else, but that Dremel carving was pretty satisfying to watch. Awesome work dude, mask came out sweet
Highly underappreciated mask
Thank you! This thing isn't easy to pull off
@@BigHush you done an amazing job
While watching this awesome video, I got an idea - what if you used Vanta-Black, the „blackest black”, for a special hockey-mask-design?
I heard it completely absorbs light, making it look almost unreal.
Absolutely incredible work dude 🍕
This may be your best mask yet!
Wow!! Great job. Another awesome mask. Keep them coming.
That looks epic
i love friday th13 and this channel is for me XD
Great mask, as always!
I didn’t expect this even though I knew the mask existed
What film is it from I don't recall?
@@cocktailsandpizza5509 Friday The 13th Jason Takes Manhattan Part 8 (1989)
Can you please do a Joey tribute from slipknot and Mabey even a Paul gray as well ?
Id love to see one
I really liked this one
Red vinyl tape. Love that shit! Man that looks exactly like the movie!
thank you very much for make a mask from my comment. I comment few months ago make a friday the 13th part 8 toxic wastey mask.
I made this mask about 2 weeks ago. What are the chances
The masks are great, keep making them
Hey bro I made a song with you long time ago. This was back in the days I mean like years back. It was called "keep acting" from the west all the way to the third coast. It'd good to see you doing good on this platform and it's cool to see you still spitting some bars.
You definitely inspire me to be creative with masks
Really like the voice over style to the new videos.
Excellent work. Excellent mask
This was amazing!!
Always 💕 the masks. What about a half Micheal half Jack o lantern. That would be awesome 😎
This Is a awesome Mask. I made a Part 8 Toxic Waste mask, But it doesn't look as cool as this. Well done.
The creator of Friday the 13 would hire you
I LOVE your videos I’ve been a fan since I was 5! (I’m 9 now) I thought you were coolest TH-cam hasn’t changed since
I made this mask last year
the mask really looks like from the movie and the darkness has a cool thing that makes me wonder of he got shot with a gun 🔫 🤔 and it is really hard for you , you did a great job making this 👏 👍 🙌 👌 💙
Nice Job I love it
That mask looks good
Thank you! Please hit that video LIKE button if you enjoyed it
this must take a lot of practice and perfect for halloween
Have you ever considered making your own Friday the 13th film
Just found your channel. Didn't really know there were that many people out there making masks probably because we have a gaming channel so it never dawned on me to dive outside that. I have a video coming out on Friday (tomorrow) and I think you'll be pretty surprised what I can do with a $2 mask from Walmart that essentially looks like a frisbee with holes. That's if you feel so inclined to check it out. With 4 cameras, slick editing and the fact that I'm a chick in a fairly male dominated space I think I hold my own. Anyways, thanks for pioneering the mask nation. Maybe we can do a mask-off in the future and let the community vote! Cheers from NB Canada!
Imma watch the video. So far from the thumbnail it looks great! Exited to see how it turns out. Thanks for sharing in the comments!
@@GabrielsLogic thanks so much
I know this is something you might not do, but can you try to make a tricky the clown mask from maddens combat
Big Hush back at it again. Great job with this one man.
Also, where did you find the wheel point bit for your dremel? I can't find one anywhere except online. I really need one to go along the jagged edges for my masks.
Amazing!
Everybody has a Michael Myers mask and a Freddy Krueger mask but those masks are very specific the cool thing about Jason is he sports a basic hockey mask
Good Video I love the Mask design👍🏻
But i have One question, why after the Uber Jason Mask video are you now explaining the video’s process ínstead of putting a text at the bottom of the screen as you did in the past videos?
Not that I don't like your voice but I like the videos without commentary it's nice to just chill and watch without the voice over
That looks so good
One of the Worst movies, One of the best masks! Awesome 👍
*I was one of the people who suggested this mask!!!!!!!! :D*
Cool design
So fresh!
I love it
are you gonna make a spirit halloween or classic jason mask this year for halloween?
I’m going to make this mask today it’s so cool👍
Looks great! What if you did one based off of Jason’s head after it was chopped up in the wood chipper in the reboot?
Loved how you put my comment in the video!
Could you make a doom slayer style hockey mask?
i see on your previous video's that you leave most of the time the metal (buttons) on the bottem on it, can you not drill them out? i like to know i want to try one for myself.
Easier way: put the part 8 Jason mask in toxic waste for about 6 to 8 minutes, it works. But if you wanna touch it, just make sure to use gloves XD great video though subbed
Great mask again, bud. The toxic burns were starting to look like burnt sugar by the time you painted them... Maybe you should have tried that instead of the glue ;)
if you havnt already, could you make one that looks like its been mostly covered in moss and plants, thats been left in a forest for a long time
Can you do a Halloween kills inspired Jason mask
Now that sounds badass, gunshot cut on one side and intense burns on the other
love what you do | do i need e6000 or will regular glue work?
Hey, Big Hush. I have a two-part Jason hockey mask concept for you?
That looks amazing!!!! Also if you haven't I've got a mask idea you could do the mask from never hike alone
Very nice job !
You should do the rag in brush it does look like a lot of Texter
I love your videos Jason is my favorite one
Hey man, I’ve been a subscriber for a decently long time and I just now got back to watching your videos after a bit. Missed watching you make these masks so much
i dont know how far in advance you may or may not film these but if youre gonna do another spirit halloween jason mask video id kinda like to see you fix up one of the other kinds of jason masks they sell
i think in one of your spirit videos next to the more accurate one you bought was a different one with a different shape and look to it
it might be interesting to see what you can do with that or maybe even one of the crappier looking masks that are more widely available around halloween
I'm definitely going to make another one soon, but it'll be the same starting mask as before. The only other one I've seen them sell is that little oddly shaped kind that I'm not personally crazy about. Sorry, I hope you'll still watch the new installment when it's up!
@@BigHush oh yeah of course im gonna watch it i just always like to see what you can do with stuff lol
super cool man
Hey so good At making stuff
The slack has been cut like butter with a knife
Cool mask
Mask Ideas:
Anime Jason. I don’t watch anime but I know other people do and I think the style would be interesting.
Tim Burton Jason. This pretty much explains itself.
Xenomorph mask. Not sure how, but I think you could pull it off.
Cyberpunk/steampunk Jason.
Cute Jason mask. Like if it were a mask in a kids cartoon or something.
Middle Earth Orc Armor Themed Mask.
Infinity Gauntlet Mask.
Actual metal mask.
Stranger Things Upside Down Mask.
Just a few Ideas I feel you’d enjoy and people would like.
Bro this is cool
21:34 that's kinda like burnishing leather
Instead of using a wood Burner would it be possible to use a sottering iron?
Yeah it’s basically the same thing
Pls could you redo part 4 mask? Or make variant of part 4 mask
You earned new sub
Can you make a Jason mask out of camouflage
Where did you get the mask before you started?
I buy them in bulk from China. I also sell them in my Etsy Shop: www.etsy.com/shop/BigHushStuff
Otherwise you can find them on Ebay and Amazon, but BE CAREFUL. All blank masks are NOT created equal. haha
@@BigHush thank you I was just wondering if they were the Halloween costume masks lol
Can you please recreate the Savini Jason mask?
hey big hush friend why don't you make the netflix squid game mask in version jason mask like for big hush to do it
Can you do a squid game Jason mask?
Fun fact when he said tap water tap water is a youtuber 😭😭😂😂🤣🤣
Is so cool
great some areas should of been a little more burn or darker but I love this stuff
Hey should have tried hot glue instead of e600 glue for the texture
That sure is pretty