** NEVER GET A FLAT TIRE AGAIN! ** -Works On Any Bike
ฝัง
- เผยแพร่เมื่อ 4 พ.ค. 2024
- We all can agree that a flat tire on the bike is the biggest bummer to a session or a ride. If you're like me, then you have tried any hack to get that bike riding. Today I have a special product I'm trying out that will virtually eliminate the flat tire!
If you want more info on tannus products then follow the link below.
www.tannusamerica.com code: MIKExTANNUS for 20% off!
Thanks for the continued support and special thank you to all of you who've become new members to the channel. If you're wondering how to become a member and what the perks are, be sure to hit the " JOIN " button ob my channel page to learn more. 🙏🏼 -Mike
🛒 www.amazon.com/shop/mikefede
🎨📨 Sticker orders come in $10.00 variety pack or $15.00 mega pack. All orders are paid to the PayPal link below. Be sure to put your address in the info section when you send the order. If you want a custom sticker in any order then add $5.00 and a description of what you want the sticker of.
- www.paypal.com/paypalme/mikefede
👕teespring.com/stores/adaptive
📹 www.insta360.com/sal/one_r?in...
🔒 amzn.to/39Dmj8d
📸 Instagram- @MikeFede
📲 Twitter- @MikeFede
👻 SnapChat- MrFede
🎼 Music- eLBee - บันเทิง
A trick I use to do, was cut the tread off an old Tyre and it fit inside my bike tyre which thorn proofed the wheel.
I also did this but found that the edges on the cut tire used as a liner caused holes in the inner tube eventually. I suggest wrapping the cut tire in an old inner tube to protect it from the rough edges of the cut tire that is used as liner.
Or you could melt the rubber with heat and then smooth the edge when it's hot
@@WeAreNotAmused I made my own flat proof wheel lol
I did the same when I was young
Now can just buy a tannus insert
I really enjoyed this video! I am over 60 and cannot drive a car because of macular degeneration. a bicycle is my only transportation. I am always getting flats because of this spikey burr that is on my alley. i have been looking for something like this! Thank you for sharing this! Keep up the good work!
Hi Roger! I was diagnosed with macular degeneration about two months ago. The exam report said something about my being in the 12% range which I didn't look up. They prescribed a very expensive vitamin combination called PreserVision Areds 2 that is $37 for a bottle of 120 soft gels that is supposed to slow it down. I don't notice any visual effect yet. They gave me the brochure with the checkered pattern test to be alert of change and go to ER if the pattern skews. I see halos around lights at night but was told that's my cataracts gradually forming. For the macular degeneration now they want me back in 9 months instead of the former 12. The doctor was in a hurry as always and went. Is the 12% range mean it's all minor? I made copies of the brochure to mail to all of my siblings. Our late mother had it and had the laser treatment at about age 86 and never had it at 68. I have no driving restrictions but can't afford a car and commute by bike and city bus. I'm thinking it's hereditary. Is that true? I know this doesn't relate to bikes but thought I'd ask. I am concerned about it on and off and get into denial. I take Alreds two times a day as prescribed. By the way, did you hear that swish sound when Mike Fede did the ride test with the Armour guard installed? Have you used it?
It's good to see the over 60s people riding bikes. Ebikes or pedal assist bikes are great for the older folks. Cars are borderline slavery these days. Not even borderline, they make you a slave.
A bike is freedom. 👍
@@datner76 Hi Nick! You're right on! I had to junk my car with 280,000 miles on it in 2017. I had been commuting by bike and sometimes 2 weeks would pass and I didn't use it and also took a lot of people in my Senior high-rise shopping, Dr. appts, ER etc as random acts of kindness. Once I didn't have a car I lost all my friends and had a great feeling of liberation not owning a car. I can't be places I want to be sometimes but really an overall great feeling of liberation. I hear some bicyclists say, "I'm car free!" ha!
We recently bought two new extremely heavy Riese and Muller E-bikes from Germany sporting Schwalbe tires and took them on a 200km journey. We got three flats and had to end the trip about 10km's from home in the back of a van. Fitted the Tannus liners and have since done nearly 2000kms in two months with zero flats so far. Can't recommend these bad boys enough
Just wait until the tannus thins out and becomes useless! Only lasts a month
I used to put fixaflat and pump it as a temporary fix until I could buy new tubes but I think I’ll give this a try 👍
Great protection ,. It usually won't get more extreme than the drill,. And it handled that pretty well. Great product
I used that product and I got a puncture first time out down a track. The supplier kindly sent me a replacement which was very honourable.
Great video, had not heard of this product before. Thanks.
looks like a pretty good thing for beginners to have for sure. when i first started in my first month i had like 4 flats and 2 of them happened in a single day. awesome video 👍
Now ! If they only made them for e-scooters !!!! That would be fantastic !
@@reginaldwebster9243 You just cut it down
Love your your films - that’s exactly what I’m looking for ! 😊😊😊❤❤❤ Great products !
Excellent video & thanks for sharing 👍🏽
You could put a couple of tire liners and it will protect the tube. Either that or I would flex seal the inside of the tire wall for some better sealing
Just use flat out for $5 per tire and you can drill into innertube with quarter inch drill bit and still ride it home
Awesome video Mike that protection looks good 🤘🤘
I used Tannus Armour on my front and rear tires and still got flats. One of the flats was caused by a small metal shaving. The Tannus Armour is thick but it compressed down to about 1/4 of an inch after I rode the bike a few hundred miles. I was not able to ride a short distance with a flat tire as Tannus advertises. Riding with a flat tire would have damaged the rim. Since putting on Schwalbe MARATHON PLUS MTB HS 468 mountain bike tires, I have ridden over 4,000 miles without a flat. They are thick enough to not get a flat if an object as long as a tack is stuck in the tire. I also used the compressed Tannus Armour inside the Schwalbe tires for extra protection. The Schwalbe MARATHON PLUS MTB HS 468 mountain bike tires are much heavier than standard tires, but the protection is worth it to me.
I was wondering what type if tires you can get that are heavy duty
@@michaeljohn7467 I have had Schwalbe Marathon Plus MTB tires on my mountain bike for about a year and a half. I have ridden over 4,000 miles without any flats. They are thick enough to prevent flats from objects the length of a tack. I also have used the Tannus Armour at times for extra protection. I also cut the stem out of an old inner tube, and put it between the inside of the tire and the inner tube that is inflated instead of using the Tannus Armour.
I like the idea of that product, I ride a bike daily and am so tired of flats. Flats ruin my riding time.
That is definately a game changing product when it comes to not getting flats. I think Terry Adams or Courage Adams could do the trick pretty easy.
It'd be good to see you do some runs on a MTB trail, then try again with these things and see if it makes any difference for comfort and that sort of thing
I have this for my fat tire ebike. It works fantastic. I’m not had a flat since I put it in.❤️❤️
Very good presentation. Do you buy a kit specifically for your needs, or is it one kit fit's all. Thanks
Cool review *Mike* ! Thanks for showcasing our flat protection tire insert. Cheers!
Anthony panza can probably do that trick but I’ve been a big fan for a while, I really like your vids. That tire protection will be really good for my bmx tho , I ride threw a lot of glass and thorns so it’ll help a lot with less punctures on my inner tube
Back in the 1990s i had similar product on my bike it was called Mr Tuffies tyre linner and it was great, before I was going through a least 1 to 3 tubes a week and after I fitted the tyre linners no more puchers .
UPDATE. I knew I read it somewhere, so I got out my Tannus installation guide and on page 3 under Tips For Installing Tannus Armour it states (It is common for the Amour to compress over time. It still is providing shock absorption and puncture resistance but will perform better when properly maintained. To minimize compression deflate the tires while not use. This allows the Armour compound to rebound to provide ideal performance.) So does that mean when your not riding your bike, your suppose to let the air out of the tires? I'm sorry but that's not happening. I don't know how everyone else feels, but if I would have known that earlier, I would not have purchased the Armours.
Get "Flat out" tire sealant best thing out there.
awesome moonwalk reverse! haha. This might be a pretty useful product, considering that I've punctured a few tubolitos ...
Thank you for helping that person really
5:22 Ahhh this is where the Disney Lamp sound come from.
Great video just curious to see how well it really works
I had a problem with goat head thorns here in Spain so I chopped up a 10mm thick yoga mat into 2" strips for liners, squirted in some anti puncture fluid to, now I go anywhere & the cost to do 2 26" bikes was 16€
I'd like to see you and your friends just go to the skate park and do a normal session. Or a normal game of bike.
This week a video like that will be out. End of the week🤘🏽
Nice.....
@@MikeFede that's good to hear🔥
@@MikeFede sweet....what's the loser got to do, i undeerstand its chilly there at the moment...just an idea...lol
@@MikeFede - I think Ongoing is suggesting a game of strip bike.... LoL 😂🤣
They work great and a definite improvement n better ride.
Awesome product
Excellent work . my self I will put it on my motorized bicycle .8/23/2021
Great product!
Back in the 80s, I had those pool noodle tubes for my BMX. There were issues though... Pedalling was a lot harder and the ride was quite uncomfortable.
Yes it was nice to see the drill go halfway, but I would also use flatout kevlar sealant
Have you tried using both the Tanus Armour and Kevlar sealant
Interesting; I’m thinking of trying these for my dirt jumper and MTB as well. Pricey, but worth it, if they perform. Cool tricks, too. I’d have liked to see the same tricks after drilling it.
Yeah, how often do you get a puncture on a dirt jump bike? Like never. It's ALWAYS a pinch flat.
I smell a winner 💯💯
I like that that’s better than double tyre, or solid tyres
Aye that's super cool. Would really help when your street riding and have disrespectful people that like to break stuff in your skate park.
Great demo
Good product liked it very much
If were throwing numbers i havent had a single flat since switching to effetto sealant a few years back. Light tyres too. Stans was just separating and leaving orange liquid in the wheel and no sealant in place. Effetto lasts a good 3 months before it needs a topup. Would like some more burp security though, just not at these weights.
Rescue Mike, you could EASILY do that trick in reverse!!!!! Keep up the good work!
Definitely agree with Sabastion need more just chill game of bike maybe even a game if add on with wheel of misfortune!
Wheel of misfortune Was definitely a fun one. More regular riding will be coming soon. Just then really cold and trying to schedule more time has been difficult who is business being so busy. Thanks again for the support and check back daily for new videos bro!
Thank you most definitely will! Keep up the good content need to maybe meet up with Scotty when it gets warmer maybe do a video on his Chanel miss seeing the old crew ripping at incline. Maybe Scotty will have to go to your local and do a video !
Pretty cool product 👍
Yo man love your videos you do cool stuff I wish I had that
Get the revolution hub and backwards manual and peddle forward!
Great vid I hope that it works out for me imma buy one
Gotta give those a try.
Hmmmm, might have to give this a try.
Dope product
great video! glad you like it!
Looks like a good product.
I bet the wheel feels heavier when fitted, and two wheels into a distance ! That will be a good test .
I need this for my ebike build!!!!!!!!
Im 60 no drivers licence,so i use to bike my old crosebike that my father win the promotion of liberty condence milk in 1953,now i modefy a gas 80cc motor .i always getting flatire, thanks to this technology,im living in Cagayan de oro city, Philippines.
Good product I'll try to use it Tom here thank you
A good guy. No stranger has ever helped me when ive had to many Ceasers and fellover.
Green slime works very good too
This is my 3rd comment.
Since you do reviews how do you feel about the BSD Revolution Hub, you could pull off that moonwalk fakie manual?
That's cool
What's the name of the product
I think Ali Clarkson will be able to do that but he is not a bmx rider he is a street trials rider
I agree I think he would pull it off with a bit of practice
Yeah any of the top trials riders can do a fakie manual
I could see these being good for the E-bike E scooter scene - do they do 10 inches 8.5 and so on?
Pretty decent product if one doesn't wanna go full non-pneumatic for whatever reason. One thing however was completely left out of your video or even a ballpark was the cost of that product. I would love to get a set for my ebikes but there's no mention of any other size than your 20". I would need a 12" and 14" for mine so I will have to do the digging myself and that is something I don't mind. As far as your riding skills and given talents...you make it look effortless and dynamic. So am I eligle to win one of those Amour things? I liked, shared and given you a 4-star review. Thanks Dave. Wikkid
I use tannus armour on my mtb, being a heavy rider it means I can lower my tyre pressure and definitely does improve grip off road. Only had one flat in the last 9 months.
I did find installing it more difficult, I had to use tyre levers. Top tip, be very careful not to pinch the tube with the levers! Though next time I will try your method of putting the tube in the armour first then putting the whole thing in, I put the armour in first then the tube and it was tricky getting it all to sit properly.
Me too bro
If you have trouble installing tire disinflat tire when installing
Kool I want one now
I just a hero as a hobby!
Cool video my man..just subscribed..✌
Those green slime innertubes with a schwalbe marathon keeps me pretty puncture free. To prove the point when the farmers cut the hedges by me i get around eight punctures on average I've not had one.
with my ebike it was a must. great product. a must have hands down
What's been your experience with it over the last 3 years?
Follow up video!!! Do a then and now please.
Nice Video thank you : )
The real headache is a flat on an electric bike, and disconnecting all that crap, from drive to brake, hoping you get it back on adjusted right. And oh, do you have the right-size tube? Is it available at Walmart? Ten minute job becomes a possible hour-long nightmare. I've been using Slime but what they don't tell you is it eventually blocks the Schrader valve, so keep a bag of them handy since you'll be changing them.
Found you from the Ariel Rider video you made. Did you put these on the X-Class? They have 20x3.0-4.0 and 20x4.0-4.8 listed so it's right in the middle.
do you get different sizes for like road bikes with those thin wheels ?
I keep having to ride my bike around my city nearly every day and people keep throwing trash on street sides and that keeps popping my tires and that's the best reason not to litter in the streets.
I even get staples I'm my tire and it makes me mad when I get stranded by a flat.
I even had to ride to highschool dealing with this problem.
And I ride in traffic lanes because there is less hazardous trash in the lanes and so I can go a bit faster, although it is quite dangerous and I'm not scared of heavy traffic...it's a good thing I know how to ride a bike well!
Hi Mike. I enjoy your videos. I tried a set of these and it completely changed the way my bike felt. It felt heavy and sluggish and I removed them immediately. I’m pretty sure I wasn’t imagining this. Do you run these on a regular basis?
Hey! I run them on my other bike, but my main bike for park I don’t. I can notice a little difference in weight, only because I run a light setup. I think their good for a street rider for sure.
Yup. These are terrible. They also do nothing to stop flats. They get thin over the course of a month and can’t stop a simple thorn.
you could get the backwards manual with a forward pedal done without a chain 👀
I HATE FLAT TIRES and I've had quite a few. I'm Handicapped and I can't walk well but I CAN ride a bike as It keeps my muscles from atrophying. My most memorable flat tire experience was when I had to use the bike as a "Walker" to get home. Of course it was in the Rain and In heavy traffic!
Yeah, flat tires. Great Fun. I might just TRY THIS PRODUCT! LOL!
I need this for my car!!
Rob ridge uk rider (legend) Good content aways keep it up Mike.
I'd love that protection bcs I live on a farm and I get flats from stuff all the time
I remember in my teens we used to put old bold BMX tires by cutting off the wire parts of the tire before putting the thinner tire inside the fat tires.
So...how much does this miracle product cost (if you know)
And I wonder if it's available in Europe
Is the swish sound I'm hearing the friction or rubbing between the protective material and the inside of the tire, meaning is that a tradeoff is it creates a loud swishing sound? Also, how would it work in Minnesota winters? Also did the tire pass the flat test maybe several hours later with a very slow leak?
would love these!
Are they just for kids bikes or will they go on road bikes, mountain and hybrids?
seems much better also for motorcycles???
This vs slime vs "bacon strips" What would be better for fixing a hole if needed? Then style of helmets. I bought a good full face for dh and found out it's not rated for it. Maybe talk about what to look for in a quality product.
as time pass by as you continue to put miles on the tire with tannus on it, it will eventually flatens out due to centrifugal force. I would add flat out or a liner for added bonus.
Hi I would love it for my montain bike .
love when he goes backwards cars also goes backwards with him 😍
Could I fit these in a 2.3 or 2.4?
The Tannus liner will compress under pressure and be thinner but denser. However, I had a Maxxis Hookworm tyre with the Tannus Liner PLUS a heavy duty narrow tyre liner inside that and a 4mm dia stick on a cycleway went straight through the lot and flatted.
I'm now on Schwalbe Marathon E-Plus Performance Courier tyres. So let's see how they go. I'm sick of flats on the street. None in the bush though.. go figure.
Rescue mike💪💪💪
Do you have anything to prevent my tires from rotating on the rim and ripping the tube at the valve stem?
use a few old tube cut down the inner seem then put over your tube work the same and it free
I think you should try riding street trials for a video idea
DO THEY DO THEM FOR POWERCHAIRS AND MOBILITY SCOOTER'S? IF SO, HOW MUCH?
Used tannus on my 4.4" tyres got 2 punctures in 2 years - 1) a Big big 1.5" thorn 2) A badge with a long metal pin. Always in the rear tyre - front tyre seems to dislodge objects on the ground ready for rear tyre to get punctured :(. I ran too high pressure 30psi with the tannus and that makes it much much less effective - still 2 punctures in 2 years is pretty damn good and so it's best to run as low as pressure as is possible with the tannus.