I showed up to a test site with my cousin a couple years ago to test for a job, it was claimed to be the usual bell & branch setup. Boy was we surprised when these "7016" rods was tossed our way. 🤣 Needless to say our leads were rolled up pretty quick, haven't failed a test so bad ever.
do you ever get bored welding around circles man that would do my head in I run a mobile engineering business and do fab and weld I enjoy making stuff more than burning it together but each to there own
You want atleast a heavy 1/8” gap with a 1/16” land. Slight side to side movement and stay in the puddle. It will almost lay itself in like a downhill root. And def hit your stops for the root atleast
Keep up all the good work Luis. I enjoy watching the videos you post. It's a beautiful thing what your doing with work, your living situation, your girl, life in general!
When I did this, I used the back side of the rod as a spacer. I whip out and come back in, as long as your puddle is still res, you won’t trap slag. I also used heavy land
Try driving a wedge like in each quarter or about about 4 or five inches above where your welding to keep from slamming shut on you! Those little wedges or cut a normal one in half to make two skinnier ones. We tested on 250 wall though that 375 wall tends to be a little more forgiving!! Play with the thickness of your landing as well!!
5/32 gap with 1/16" land 2nd gear and about 20 on your remote. Stay in it and do not key hole it, stay in the puddle or suck back will get you everytime. Good luck love your stuff
![[TH]FFWS SEA 2024 Fall - Knockout Stage Day 1](http://i.ytimg.com/vi/nsDmUQdWVtg/mqdefault.jpg)
Weld it and stop talking
I showed up to a test site with my cousin a couple years ago to test for a job, it was claimed to be the usual bell & branch setup. Boy was we surprised when these "7016" rods was tossed our way. 🤣 Needless to say our leads were rolled up pretty quick, haven't failed a test so bad ever.
do you ever get bored welding around circles man that would do my head in I run a mobile engineering business and do fab and weld I enjoy making stuff more than burning it together but each to there own
Never take a 5p root pass for granted.
7016-7018 all the way out… In service test, water bath makes a man outta you. 🤣 3-4 day test holy shxxxit!
You want atleast a heavy 1/8” gap with a 1/16” land. Slight side to side movement and stay in the puddle. It will almost lay itself in like a downhill root. And def hit your stops for the root atleast
7016 welds better in straight polarity
using the machete as a spacer, gonna have to keep that in mind lol
Welcome back my beautiful people
REVERSE POLARITY on root
Keep up all the good work Luis. I enjoy watching the videos you post. It's a beautiful thing what your doing with work, your living situation, your girl, life in general!
Thank you for the videos.. even as a single hand i enjoy watching your uploads.🙌🏻
When I did this, I used the back side of the rod as a spacer. I whip out and come back in, as long as your puddle is still res, you won’t trap slag. I also used heavy land
Great to see you still working Sir
Try driving a wedge like in each quarter or about about 4 or five inches above where your welding to keep from slamming shut on you! Those little wedges or cut a normal one in half to make two skinnier ones. We tested on 250 wall though that 375 wall tends to be a little more forgiving!! Play with the thickness of your landing as well!!
I wasn’t sure about you at first! But I like you now!! We all get those days!
Good stuff man. I think the craziest rod I’ve ever welded with is 8013-c or something along that.
5/32 gap with 1/16" land 2nd gear and about 20 on your remote. Stay in it and do not key hole it, stay in the puddle or suck back will get you everytime. Good luck love your stuff
I'm from Tunisia, North Africa, I'm a welder, and I'm currently residing in Canada. You are really creative bro
He mamalon el separador que le metiste jajaj machetazo loco , soluciones no problemas en el trabajo ... Saludos carnal mucho éxito 😃