Kubota MX/L/M Series - How to Check & Change HYDRAULIC OIL!

Checking and changing the hydraulic oil and transmission fluid in your Kubota tractor with the V2403 diesel engine.
TOOLS/SPECS:
Hydraulic/Transmission Oil change- every 400 hrs
Hydraulic Oil Filter change- every 400 hrs, torque= hand tight plus 1/4 turn w/wrench.**see note below.
Filter options: Kubota HHTA0-37710- amzn.to/4ag7cPK
Baldwin BT8488- amzn.to/3V40A2I
Transmission Oil Filter- every 200 hrs, torque= hand tight plus 1/2 turn w/wrench. **see note below.
Filter options: Kubota HHTA0-59900- amzn.to/4dEX2eo
Baldwin BT9358- amzn.to/4bGozdJ
Hydraulic/Trans Fluid Capacity- 11.6 gallon total (I don't usually buy into the manufacturer only fluid thing but in this case, yes, stick with the Kubota Super UDT2)
Kubota Original UDT2 (1-gal) amzn.to/44Mq1sz
5 Gallon bucket pump- amzn.to/3ymnR71
Rear hub drain plugs- 14mm socket amzn.to/44GCsX0
Transmission drain plug- 15/16" socket amzn.to/3UKexBv
other Trans drain plug- 3/8" Hex socket amzn.to/3ymXKNi
*Hydraulic/Trans fluid filter wrench- I think you'll find you'll be needing an impact prybar and a hammer...I "torqued" it hand tight then used the prybar/hammer to move one of the notches around another 1"-2". You'll see what I mean when you get in there.*
Check out my amazon channel at http:www.Amazon.com/shop/REDNECKTECH for more great products and reviews!
this channel may make a small commission from any sales made through affiliate links.

[@clarencecarter960]

Good factual, clear & short video!

[@jameswatson4110]

Thank you for a nice informative video. I know how to do mine now👍