Spektrum NX Series Tutorials - Flap System
ฝัง
- เผยแพร่เมื่อ 29 ก.ย. 2024
- Spektrum NX Series Tutorials - Flap System
Thanks for tuning in to The RC Air Marshall TH-cam Channel!
In this video we'll be checking out how to use the flap system in the Spektrum NX Series Transmitters.
** PRODUCT LINKS **
The links below are affiliate links. A small commission is paid at no additional charge to you when you use them. Thank you for your support!
Spektrum NX Series Transmitters
bit.ly/RCAMNXS...
Pleast visit rcairmarshall.com to find links for all of our Affiliate Partners!
** RC AIR MARSHALL MERCH STORE **
Get your hands on "The Best Tee's in RC"
bit.ly/2Ep04Hu
** RC AIR MARSHALL CHANNEL MEMBERSHIPS **
If you like what you see, please consider becoming a member of The RC Air Marshall TH-cam community! For as low as $1.99 per month you can enjoy exclusive perks including special members only videos, weekly Virtual Fly-Ins, Special emoji's that can be used during premieres and live shows, and members only discounts on The RC Air Marshall TeeSpring Store! Thanks for your support!
Click here to join! | bit.ly/32dYFM8
** PAYPAL CONTRIBUTIONS **
If you would prefer to make a contribution via PayPal, you can do so here:
paypal.me/davi...
** AIR MARSHALL MONDAY'S **
Be sure to join us every Monday night at 8PM Eastern for our Live TH-cam broadcast "Air Marshall Monday's" - We answer your questions live, and discuss everything RC!
** VIRTUAL FLY-IN **
On the first Monday of every month, we host a LIVE Virtual Fly-In using RealFlight 9.5. We typically hold contests, and put a $25 gift certificate up for grabs! All contributions to the channel made on a virtual Fly-In Night will go to the winner of the Fly-In Contest in a winner take all format! Always fun! See you there!
** SOCIAL MEDIA **
Follow me on Instagram!
bit.ly/2sMEw2g
Follow me on Twitter!
bit.ly/2QRsrRc
Join our Discord server and come on by every Friday evening for a Live chat!
/ discord
Please like, share, subscribe, and ring the bell!
Thanks for watching!
#Spektrum #NXSeries #Tutorials
![[TH] FS vs BME - VCT Ascension Pacific - Lower Bracket Final](http://i.ytimg.com/vi/wnygqsR2Fig/mqdefault.jpg)
Thanks for watching! Check the description for links on where to buy your own Spektrum NX Series Transmitter! Please like, share, subscribe, and turn on your notifications!
The best tutorial on the NX radio I've seen so far. I can't believe how easy it was to follow and understand.
I'm fairly new to RC aircraft and all the details about the flap system I couldn't work out before are
crystal clear now. Thanks buddy, very much appreciated.
Thanks for making things so clear about NX adjustments on flaps, even though I'm still stumped on how my flap freezes at pos-a take off and never moves in any other position, I'm sure I'll solve this as I study more about my plane online and in forums. Oh, I like the VH Tee shirt, I've been a Fan since I 1st heard them when I was in the 2nd Marine Aircraft wing back in 1977!!!
Really appreciate your work. I'm older and just starting in the hobby. Can't always hear what people are saying, either because they talk so fast or because of their pronunciation. I'm not saying it's their fault for I went through this with my dad some years back. LOL
Anyway, for me, I can hear you with no problems. And the way you explain everything makes it easy for a newcomer.
Thank you
Thanks for explaining how to seat my flaps on my planes. Using my NX8 ,
Nicely explained, thank you
Good job as always😁
Ii learned so much in this video thank you sir
Can you set your flaps to the dial, so they are adjustable in real time? Much like you would with Gain on a flight controller? Just trying to think of the new capabilities of the NX8 and up
thank you for clearing alot of this up, great job. I have one question though. I have a Glider No throttle with Spoilers, elevator, and Rudder. spoilers are run with 2 servo's do I just use this Flap setup? using a 3 position switch D I'm using a NX 8 new version with latest up dates. Do I put these servos on AUX 1,2 ? I understand one of the servos is reversed. Can I rename the switch to spoilers instead of Flaps?
Thank you
segunda vez que me ayuda este video. GRACIAS.
👊👊😊
Great job Dave, but it didn't change my life!
Thank you for being so clear with you instructions.
Very clear and complete instruction. So thank you. Question: the Carbon Cub S+ with GPS, and LAS lease only Channel 8 for the Flaps. How is that accommodated using the Flap System if it assigns flaps to Channel 6?
I set my flaps up in f modes. This allows me to trim the plane to fly at each flap setting. Works great 👍
Just a note... 1 Ail 1 Flap doesn't necessarily mean 1 servo for each. The image shows 1 servo each, but it really means you are assigning 1 channel for each. E.g. If I have 2 servos for the Ailerons and 2 servos for the Flap... and a Y harness on each of the Ail and Flap then I would choose 1 Ail 1 Flap because they are being controlled by 1 Channel each.
COOL!! 🤘🤘🤙🤙🤙
Great video! Earned my sub! Setting up my NX8 for the first time as well as the blue and white fms trainer 182 and this video allowed me to finally finish my setup! Thank you!
Very well done and thorough video. You answered my question about the new linked feature. Thanks!
Dja2424
Could you help me with an NX8 flap setup question... I am selecting dual AIL and dual Flap servos for a Sail plane but I am not getting the Flaps setup in the Function List. I am getting instead Camber presets and Camber System???
Great tip Dave. Tuning Flap to elevator mix can be tedious at times depending on the plane and weather conditions but it is very rewarding when you get it all dialed in. 👍👍. Enjoying you tutorials on the NX line of radios. ☺️
I have a NX6 and would like to have my flaps set-up to be variable...not just the three setting on my switches. Is there any way to make it so I can set the flaps at a variable setting? Thanks.
Terrific explanation of how the flap system works and I know you haven't got there yet but your better off to set it up flaps as flight modes so you can have separate trim on each position that way you don't need to keep adjusting your elevator settings to find the right setting.
I would need to do some experimenting with that. I know you can do it, just not sure if using the flap system would be the best approach. I think it may be better to assign the knob/slider to Aux 1, and use the mixing menu to assign a mix from flap to elevator.
@@TheRCAirMarshall You could do that but the nice thing about using flight modes is you can have three different trim settings. If you go to "trim setup" you can select FMode instead of common. You can trim the elevator on each setting while in flight without affecting any of the other flight modes.
Hah, sorry my answer was for someone else. I absolutely agree with you regarding flight modes, but that’s a couple weeks out. 1 video a day, I wish I could just be available all the time. Real job and life get in the way. I just want to make videos, and have a whole filming and editing crew. That would be awesome. LoL
@@TheRCAirMarshall Gotcha. I have to say I've been enjoying your series so far learned a few things I didn't know. Keep it going when you can.
Another super RCAM production.
Thank you for this video. Really helped me.
Great instruction! Many thanks!
Thank you 👍👍👍👍
My NX8 also has a setting called (Crow) with this you can also add an aileron mix with elevator, very nice.
Your videos are awesome brother, saved me a lot of headaces, very easy to follow you as well, bravo Sir.
The best on the NX for sure, thanks for the lesson.