If you know all the right tricks roof trusses are a breeze.. I've probably done hundreds of them and I've ran into issues In the beginning and have since learned how to start off right and what to do to avoid complications.
Your patience is amazing…your attention to detail is exquisite….they say “you ain’t bragging if you can deliver the goods” and obviously you can deliver them…thank you….
You are welcome. Thank you for this comment! Subscribers like you that appreciate all of the effort I put in these videos make it worth your while! I’m just thankful I can help others using this platform!
Dude- I stumbled upon this video just this morning and I gotta tell y’all, for years I’ve fought valley rafters cuts where it’s taken me all day for a simple 8 rafter overbuild. Today it took me less than 4 hours. Holy crap! Thank you for posting this informational video. You explained it all so well! Chris H.
Hi, I just wanted to take a moment a thank you for this video. My Pastor and I adding a new addition to our Church and the addition is going to have two valleys in which neither of us have built before. This video and a few others really helped. Thank You.
I'm no carpenter and building a roof has always been a challenge for me, but your explanation, has helped take some of my doubt away. There's a lot of information covered in this video, thanks for taking the time to show us how it's done.
Thanks for this. As an apprentice carpenter, when cutting these rafters, I've been given all the measurements and angles by the journeymen, but no one explained where they get those angles from. You do a great job explaining why to use the angles and set back measurements.
Currently 22 yrs old and got into framing when I was about 18, I run a small business and sub contract for gc’s. loved this video I had an idea but needed reassurance man you got yourself a new fan. Thank you so much.
I really appreciate the video. It made it much easier to frame in a California this afternoon; I’m a bit rusty and missed a couple cuts, you saved the day
I did that..this past summer..it was a challenge..my first time doing it..but i managed to do it...i've worked as a carpenter..10 plus years...good information mister...ill learn more from this...good job
Thank you for posting your how to content. My wife wanted a peak addition and your video made it happen. Thanks for helping the do it yourself non-professional.
Definitely one of the best instructiontional videos I've seen. This was the way I learned to build my own porch, first time ever building one! Couldn't have done it without this vidio, very thorough. Thanks!
Great video. Don't give away all the secrets. I've been framing for twenty years and this is where the basics start. Nice work. You've inspired me to vlog my next project. 24x28 garage build.
FYI for anyone curious about the cuts on the top and bottom of the sleepers -- as an alternative to scribing, set your framing square to the roof pitch on the tongue, and the rafter length on the blade AKA body, and mark the top with the tongue and bottom with the blade. Top is square cut and bottom is set to the roof pitch. Its the same as the sheathing angle.
Hey, young man, I applaud you on your skills and your teaching method. Thank for sharing your wisdom. When you do good work, it's ok to brag a little. I enjoyed the video. Blessings
Thanks a lot friend! I’m glad I can help other via youtube. I’m thankful for subscribers like you. I appreciate your kind words! I upload 1-2 times a week. Stay tuned. Cheers!
Man, let me tell you so many videos out there trying to show you how to do things. But this one is the real and perfect explanation of how you do it. Great block of instruction. Thanks
Love the video. You build more like I do than most videos I watch. Actually, the best way to find what angle a pitch is is to look at your speed square. Set the square on the pitch and read the angle below.
An easier way to find the degrees for the pitch of your roof is using the speed square, the marking for the pitch will have a corresponding degree mark at the bottom. Thanks for the video!
Finally someone has explained how to layout the frame work. I’ve watched a ton of videos and none have showed the hole process as you did. It’s my first time doing this. I plan on going over the shingles on the old roof. I trust this is acceptable. I’ve seen videos of it being done.
I had my roof replaced as part of an insurance claim due to damage from a pretty wicked storm we had come through here in Oregon back in 2021. The contractor did indeed roof over roof to even up the ridge line as one of the additions came down to a “V” shaped valley of sorts behind the garage. Only problem is he didn’t continue the main attic for access, and no idea how he did it.
Other issue I discovered is that instead of putting the new underlayment and the ice/water barrier on after putting the plywood sheething on over the shiplap, he put the the underlayment and the ice/water barrier over the shiplap, then the plywood sheathing, then did the shingles directly to the plywood. So later today, their General Manager is sending out a different project manager who replaced the one that was fired to take a look and fix it under warranty. The one who did it originally bragged that he had over thirty years of experience as a roofing foreman. 😮
Awesome lesson! I am trying to get an Aprenticeship here in Los Angeles. So far no luck. But I will keep trying!!! Meanwhile I am learning things on TH-cam. BTW, If anyone needs a rookie in the LA/OC area I’m ready! Tools are new and ready to get dirty! 🙂🤙🏻💪🏻
Not a lot of people take their time to show details like this because they and also me want to get it done and no time to mess around with cameras and editing and stuff. I’m always curious about building roofs and tying in old roofs because I want to build an additional one of these days. I did roofing for my entire house before by myself so i think I can tackle this myself. Thank you for sharing the infos. I’m subscribe and saved this video
Awesome refresher. I built a couple of these on mobile homes a few years back with my dad (he was a framer before I was born). But it's been 7-8 years since I have and he cant physically show me anymore. Wish I had paid more attention lol but just watching this video definitely rang some bells. Awesome work, looks good.
This may have been mentioned in comments elsewhere but just in case it hasn't you can get the degrees for the bevel of your bottom cut right off the speed square.
I used to build houses (20 years ago) AND this brings back memories! I can confirm this is exactly how it should be done. Thank you for the informative and accurate video!
Thanks for all the great video's, I just built a roof over my existing front porch very similar to the one you built in the video. With your help it turned out great.
I found your video after doing one of my own almost exactly the same here in the UK.👍 We must be brothers!!!🤩 Great job explaining this and not easy videoing at the same time.😎
Thank you 👍 I was struggling yesterday on this, couldn’t figure the that 30° out. Would like to know to you figure it without google lol, but hey ! I’m totally confident now with these few tips I picked up from you!!!
Can you frame right over the shingles. Doing the same thing like your video. Are you nailing just through the sheathing or trying to hit house rafters. Great video
Hi how did you get the 1 3/4 inch measurement to move the sleeper from the red line inwards to its fixing position and is that number the same on very pitch or does it change depending on roof pitches thanks
Josh, ones again thanks for the video. Cutting a 8/12 and a 12/12 tomorrow if the weather allows me here in Maine, your videos helps simplify things, 🤘👍
This helped me so much with the degrees & pitch on a addition im doing now. Thx alot on ur video. Looking forward on watching other videos on house building. Stay safe.
a few things here. The best way to put a ridge in is to cut your roof pitch in the ridge first then flip it over and plain it level on the roof. make sure when doing this that you hold it down 1/2in on your gable side. another more efficient way of centering your ridge is to pull the same measurement from your truss where your valley board is going to sit up to the ridge. I don’t know if codes are different where your at but here in Michigan any conventionally framed roof rafters are to be 16 o.c and a collar tie every other rafter. also you can use 3/4 board for your valley board instead of 2x4.
I love your videos. Do you have a video on making an overhang above garage doors? with front and side pitch to it? . I also am looking into creating a overhead roof over my front entry door.. Maybe you got another video on that? I would like to get any assistance...Thank you for all you do.
Great work, couldn't get my mind around bevel cut @ the valley jack at first. Then the penny dropped when I seen your excellent presentation. Many thanks Liam.
Great video. This is the only detailed video on getting these "california valleys" framed. At 2:08 you describe how to mark the sleeper using the framing square. Does the framing square have to be level and if so how would you mark a short distance like 16" on center?
How do you get the measurement from the snapped line to where to sleeper falls? I am going to assume that it changes based on the height of the valley ridge?
Thank you for sharing, I am going to start tackling something very similar tomorrow on my own house. This video answered a lot of questions I had. You earned a new subscriber!
Would this be similar to adding a gabled patio to my existing roof? Or do you have a video on that? I want a covered patio extended out from existing roof about 10x10. Don’t want the low ceiling
Thanks man! I’m glad you like it.I remember when I first started working with a crew building houses, I would do anything to learn more. Thanks for watching!
If you want to save 50% or more on your next custom home, build it yourself. This channel is a great resource for learning how to acquire the permits, inspections, and knowledge to accomplish every aspect of house construction. Learn how to buy and develop land, excavation, foundation, framing, electrical, plumbing, HVAC, insulation, roofing, siding, cabinets, trim, flooring, paint, etc. as I have done over the last four plus decades.
Thanks Randy! If you’re going to build something better build it right! I love framing. It’s nice to look back at the end of the day and see what you got done. Thanks a lot for watching!
Hi bro. On the layout for the hip and ridge . You only showed how to measure out your first layout line as you go up from the gable end at the bottom cut. How do you continue the layout being that it angels up as you go . Can you demonstrate or elaborate on how to continue that layout all the way to the top end please? thanks . I hope my question is worded correctly . Grate video though . Really very accurate and informative.
I think I understand what you were asking. Do use the same angle cut all the way up the roof. You just get the different measurements for each one that spaced out two foot apart. So ultimately it’s the same angles but the length of the board gets shorter as you go. I hope that helps! Thanks for watching
@@TheExcellentLaborer So you use your framing square like you did at 7:55 for each rafter as you build up? What about if you're doing 16" rafter spacing?
OK, Mr Laborer Josh, I have a Valley up on the roof, I'll be adding an addition down below, right in the corner where the valley drains. How could I frame a roof there ?? What are my choices? Thank you, been enjoying your videos!! Raul , PHX
I’m glad you have enjoying my videos! In a situation like that it might be best to catch the rain in the corner like usually and let the downspout do it’s job. That being said, build your roof like you normally would and then just have additional downspout added to the new roof.
@@TheExcellentLaborer NO ,No, No, No, I believe you misunderstood. The roof is "already" built, existing roof. The "addition" will be going right in the corner where both roofs meet to form like an "L" with the valley that is there "already" drains off too that corner. So How do I "roof" right there in the corner? To cover a 10 foot by 10 foot addition right in the corner? Or should I simply hire an architect or engineer? Thank You !!
Love your videos, very helpful! Set trusses over addition pop out and now prepping to build valley rafters. I can't find the span chart that you mentioned you would include in the comments section....can you help me out?
I want to add one of these, but set back about 6 feet. I'll frame my own dormer wall similar to your manufactured one... would I use tie plates like a gusset to join the lumber if lumber is placed on short side (like a rafter/truss)? If I stick frame like traditional wall, then long side of limber will rest on existing roof, which it seems like would need some sort of shim.
@@TheExcellentLaborer I guess I'm stuck cause I'm using strapping and steel roofing.The truss i got with my rafters for this gable didn't look anything like i needed but the guy said it will build out to each side of my garage door.
@@TheExcellentLaborer If I want a gable over a garage door on the side of my building, what size of truss do i need, Does it need to be the same width as my door or smaller?
I am building a 30 feet by 25 feet roof and I don't want to put a post or a beam in the middle because it will Obstruct the way. So how can I do a 30 feet truss? Thank you.
Great work ... can you start from the foundations? Extra time on explaining the joining points of the wall with the concrete slab and the wall with the roof will be appreciated.
It’s obvious you have passion for teaching others your valuable skills and it’s greatly appreciated! You would make a great teacher 👍🏻 (SUBSCRIBED and keep’em coming please!)
I do love to pass on what I know about building. I am thankful for subscribers like you that enjoy my content. I will be sure to post more videos. Thank you!
Have you used valley trusses before? I have and they are not fun! I would rather build a roof as shown in this video.
If you know all the right tricks roof trusses are a breeze.. I've probably done hundreds of them and I've ran into issues In the beginning and have since learned how to start off right and what to do to avoid complications.
We do it just like you man!
they always come square on the bottom and I feel like it looks like shit and is not as good as rafters cut to fit "tight" by a framers standard.
@@navarrodragon25 c al
Eddy huuhI do
Sky’s r fox’s safe tr t it
Your patience is amazing…your attention to detail is exquisite….they say “you ain’t bragging if you can deliver the goods” and obviously you can deliver them…thank you….
You are welcome. Thank you for this comment! Subscribers like you that appreciate all of the effort I put in these videos make it worth your while! I’m just thankful I can help others using this platform!
Dude- I stumbled upon this video just this morning and I gotta tell y’all, for years I’ve fought valley rafters cuts where it’s taken me all day for a simple 8 rafter overbuild. Today it took me less than 4 hours. Holy crap! Thank you for posting this informational video. You explained it all so well!
Chris H.
I appreciate your comment Chris! Good luck with your projects!
Hi, I just wanted to take a moment a thank you for this video. My Pastor and I adding a new addition to our Church and the addition is going to have two valleys in which neither of us have built before. This video and a few others really helped. Thank You.
I'm no carpenter and building a roof has always been a challenge for me, but your explanation, has helped take some of my doubt away. There's a lot of information covered in this video, thanks for taking the time to show us how it's done.
Thanks for this. As an apprentice carpenter, when cutting these rafters, I've been given all the measurements and angles by the journeymen, but no one explained where they get those angles from. You do a great job explaining why to use the angles and set back measurements.
Currently 22 yrs old and got into framing when I was about 18, I run a small business and sub contract for gc’s. loved this video I had an idea but needed reassurance man you got yourself a new fan. Thank you so much.
Welcome to the channel! I made this channel to help others and to hear others ideas as well. Thanks for watching!
I really appreciate the video. It made it much easier to frame in a California this afternoon; I’m a bit rusty and missed a couple cuts, you saved the day
I’m glad I could help you. Good luck on the rest of your project
I did that..this past summer..it was a challenge..my first time doing it..but i managed to do it...i've worked as a carpenter..10 plus years...good information mister...ill learn more from this...good job
Thank you for posting your how to content. My wife wanted a peak addition and your video made it happen. Thanks for helping the do it yourself non-professional.
Just attached my new addition to the existing house. Never could have done it without viewing this video. Thanks so much!!!
I’m glad I was able to help you! Good luck with your other projects!
Definitely one of the best instructiontional videos I've seen. This was the way I learned to build my own porch, first time ever building one! Couldn't have done it without this vidio, very thorough. Thanks!
In general, it’s standard to oppose rafters when installed. Keeps them straight-ish
Great video. Don't give away all the secrets. I've been framing for twenty years and this is where the basics start. Nice work. You've inspired me to vlog my next project. 24x28 garage build.
I love doing the Vlog. It’s lot of work but fun.
FYI for anyone curious about the cuts on the top and bottom of the sleepers -- as an alternative to scribing, set your framing square to the roof pitch on the tongue, and the rafter length on the blade AKA body, and mark the top with the tongue and bottom with the blade. Top is square cut and bottom is set to the roof pitch. Its the same as the sheathing angle.
Hey, young man, I applaud you on your skills and your teaching method. Thank for sharing your wisdom.
When you do good work, it's ok to brag a little. I enjoyed the video.
Blessings
Thanks a lot friend! I’m glad I can help other via youtube. I’m thankful for subscribers like you. I appreciate your kind words! I upload 1-2 times a week. Stay tuned. Cheers!
This video encourages me to make a small roof with a valley on my future home. Thank you so much!
Good luck on your build! Thanks a lot for watching!
Man, let me tell you so many videos out there trying to show you how to do things. But this one is the real and perfect explanation of how you do it. Great block of instruction. Thanks
Yeah thanks a lot for watching! Be sure to subscribe and more content to come
Best documentary for this task. Very smart and to the point. great job.
I try to keep my videos detailed and accurate. Thanks a lot Steve!
Love the video. You build more like I do than most videos I watch.
Actually, the best way to find what angle a pitch is is to look at your speed square. Set the square on the pitch and read the angle below.
Maybe we have the same teacher LOL. That’s good to know about the speed square. That is the best tool ever made! Good luck with everything!
i use my phone
I watched the whole video , and thanks for your patience , it 's good to learn in many ways
You are welcome!
This is the best video with all the details shown and even things people might now you explain it which is great.
Man you doing a good job. I am already watching your video second time and learn more every time. Good job on explaining!
An easier way to find the degrees for the pitch of your roof is using the speed square, the marking for the pitch will have a corresponding degree mark at the bottom. Thanks for the video!
Yes check out my speed square video! I’ll show you how to do just that. Thanks a lot for watching!
One of the best videos ,and explanation I've seen ,
Thank you Tony!
Finally someone has explained how to layout the frame work. I’ve watched a ton of videos and none have showed the hole process as you did. It’s my first time doing this. I plan on going over the shingles on the old roof. I trust this is acceptable. I’ve seen videos of it being done.
Im glad you found value in this video. Roof framing is hard work! Im glad you were willing to tackle it! Thanks for the comment!
I had my roof replaced as part of an insurance claim due to damage from a pretty wicked storm we had come through here in Oregon back in 2021. The contractor did indeed roof over roof to even up the ridge line as one of the additions came down to a “V” shaped valley of sorts behind the garage. Only problem is he didn’t continue the main attic for access, and no idea how he did it.
Other issue I discovered is that instead of putting the new underlayment and the ice/water barrier on after putting the plywood sheething on over the shiplap, he put the the underlayment and the ice/water barrier over the shiplap, then the plywood sheathing, then did the shingles directly to the plywood. So later today, their General Manager is sending out a different project manager who replaced the one that was fired to take a look and fix it under warranty. The one who did it originally bragged that he had over thirty years of experience as a roofing foreman. 😮
Awesome lesson! I am trying to get an Aprenticeship here in Los Angeles. So far no luck. But I will keep trying!!! Meanwhile I am learning things on TH-cam. BTW, If anyone needs a rookie in the LA/OC area I’m ready! Tools are new and ready to get dirty! 🙂🤙🏻💪🏻
Hang around outside the Home Depot first thing in the morning. Contractors grabbing supplies might just grab a new apprentice.
Not a lot of people take their time to show details like this because they and also me want to get it done and no time to mess around with cameras and editing and stuff. I’m always curious about building roofs and tying in old roofs because I want to build an additional one of these days. I did roofing for my entire house before by myself so i think I can tackle this myself. Thank you for sharing the infos. I’m subscribe and saved this video
Awesome refresher. I built a couple of these on mobile homes a few years back with my dad (he was a framer before I was born). But it's been 7-8 years since I have and he cant physically show me anymore. Wish I had paid more attention lol but just watching this video definitely rang some bells. Awesome work, looks good.
While I will never ve doing this, i really enjoy tbe videos.
Thanks Alex!
This may have been mentioned in comments elsewhere but just in case it hasn't you can get the degrees for the bevel of your bottom cut right off the speed square.
Yes. Or you can take your short degree and subtract it from 90° to get it to.
I’m here bc of TikTok. From what I’ve seen i think it’s gonna be right up my alley.
Welcome Jared! Glad to have you. Are you a carpenter or want to do the owner builder experience?
Agreed lol
Travis Shippy welcome!
So am I!
@@marcfacunla3549 welcome the the best house building youtube channel!
I’ve never done one . But that a great job. That’s how it’s done boys and girls.
Thanks JJSRoofing! I try to do thing RIGHT! Appreciate the comment!
I like this dude.
Excellent work, clear instructions without blabbing or showing off.
Not an easy task
I wanna see more, so I subscribed.
Good job
I appreciate that!
I used to build houses (20 years ago) AND this brings back memories! I can confirm this is exactly how it should be done. Thank you for the informative and accurate video!
I love talking to carpenters with experience. They know so much. Thanks for verifying my accurate video! I appreciate it.
E.L. He's the best teacher of all the people doing these videos.
Thanks for all the great video's,
I just built a roof over my existing front porch very similar to the one you built in the video.
With your help it turned out great.
I’m glad I could help you! Good to hear a fellow DIYers in a project turned out well. Good luck on your next project and thanks for watching!
WOW! you got that guy to help?!
Thanks man, you are one of the best to explain it. Thanks
I tried to explain things in a very simple way to understand. I’m glad you appreciate it. Stay tuned for more!
Thanks so much for this video!, building my own house and this helped a ton!! Thanks again for sharing your talents, it has blessed my life.!
I found your video after doing one of my own almost exactly the same here in the UK.👍 We must be brothers!!!🤩 Great job explaining this and not easy videoing at the same time.😎
Great minds think a like. I figured it was kind of common practice. Thanks a lot for watching!
@@TheExcellentLaborer Its so cool to see you do it the same.👍
That is cool!!
Most foreman don’t have the time or the patience to go through everything in detail as well as you can. Thanks man 👍
I hope I got lucky like you when I build valley roof. Your video make me understand easy.Thanks
Excellent job !
I'm building my first one right now. I just needed your expertise
I think I just found the best TH-cam channel.
👍🏻
Amazing content man. Much appreciated
Thanks a lot! That means a lot to me. I love making videos to help people. Stay tuned for more and take care!
Thanks for the lesson, finally someone I can understand 🤠
You are AMAZING -- absolutely rock. Thank you for showing me how to add this valley -- you saved me a TON of time / money on my current project :)
You are welcome! I’m glad I could help you. That makes doing TH-cam worth it to me. Good luck on all your projects!
Nothing hard to fix
You have great teaching skills.
Thank you for that! Hope you learned what you were looking for!
All your videos are very educational and dummy proof haha thanks for the videos!!
Thanks for that! I try to keep all my videos simple and easy to understand. Thanks for watching!
Super helpful for a addition roof I am rebuilding tomorrow. Thank you! 🙏
That’s great. I’m glad I can help you. Good luck on your project!
Thank you 👍 I was struggling yesterday on this, couldn’t figure the that 30° out. Would like to know to you figure it without google lol, but hey ! I’m totally confident now with these few tips I picked up from you!!!
Im in the middle of attaching an addition. Thankyou so much!
I’m glad I can help. Good luck on your project!
When you Pulled a measurement from the rafter how did you know where to mark on the valley board?
I've always struggled with figuring out my degrees with my pitch. Thanks for the tip 👍
You are welcome!
Can you frame right over the shingles. Doing the same thing like your video. Are you nailing just through the sheathing or trying to hit house rafters. Great video
Boom 💥 good work fella . Appreciate you making your day longer for this video
Hi how did you get the 1 3/4 inch measurement to move the sleeper from the red line inwards to its fixing position and is that number the same on very pitch or does it change depending on roof pitches thanks
Josh, ones again thanks for the video. Cutting a 8/12 and a 12/12 tomorrow if the weather allows me here in Maine, your videos helps simplify things, 🤘👍
This helped me so much with the degrees & pitch on a addition im doing now. Thx alot on ur video. Looking forward on watching other videos on house building. Stay safe.
Great video! Thanks for all the detailed instruction. Very helpful! Look forward to future videos.
Thank you C! Upload a video once to twice a week. I’ll try to make them all very detailed. Thank you for stopping by!
@@TheExcellentLaborer 👍👍
Quick question, what if you where adding this roof to an existing roof. Would you remove the existing roofing shingles?
a few things here. The best way to put a ridge in is to cut your roof pitch in the ridge first then flip it over and plain it level on the roof. make sure when doing this that you hold it down 1/2in on your gable side. another more efficient way of centering your ridge is to pull the same measurement from your truss where your valley board is going to sit up to the ridge. I don’t know if codes are different where your at but here in Michigan any conventionally framed roof rafters are to be 16 o.c and a collar tie every other rafter. also you can use 3/4 board for your valley board instead of 2x4.
JUST AN EXCELLENTLY 😎
I appreciate that!
I love your videos. Do you have a video on making an overhang above garage doors? with front and side pitch to it? . I also am looking into creating a overhead roof over my front entry door.. Maybe you got another video on that? I would like to get any assistance...Thank you for all you do.
This was VERY helpful. Always wanted to know how to do this. You made it look easy. I guess the hardest part is going up and down the ladder. 😄
Great work, couldn't get my mind around bevel cut @ the valley jack at first. Then the penny dropped when I seen your excellent presentation.
Many thanks
Liam.
I’m glad I could help you! Be sure to subscribe and stay tuned!
Why are the sleepers offset from the chalk line? Is that because the sheathing will hit the roof at that line?
That is right!
You explained it very well nice and easy can't wait to try it
Great video. This is the only detailed video on getting these "california valleys" framed. At 2:08 you describe how to mark the sleeper using the framing square. Does the framing square have to be level and if so how would you mark a short distance like 16" on center?
Thanks a lot for your kind words! The framing square has to be square off the rafter. It does not necessarily have to be level. Hope that helps!
How do you get the measurement from the snapped line to where to sleeper falls? I am going to assume that it changes based on the height of the valley ridge?
Thank you for sharing, I am going to start tackling something very similar tomorrow on my own house. This video answered a lot of questions I had. You earned a new subscriber!
Thanks a lot for subscribing. I’m glad you enjoy my content. Lots to come!
Thanks for the video this helped me more then any other video.
Good to know. You are welcome. Good luck with your project!
Now I am a subscriber
Very thorough and well explained!! You possess the humility of a good teacher. Thanks for posting ... subscribed!!
I’m glad you found value in this video. I appreciate your kind words. I hope your project turns out well. Thanks for watching!
Do you have a video that shows adding a valley roof to a finished roof with singles?
Excellent video. Good audio,good details and explanations. Best video on You tube on how to frame that type of roof. Great job!
Wow! So much content value, gonna have to re-watch a couple o'times...
Amazing video my friend, thank you for taking the time to show us the right way to do it.
Thanks a lot John. I appreciate you watching. Glad you liked it!
Do you have a video on hip roof framing?
Would this be similar to adding a gabled patio to my existing roof? Or do you have a video on that? I want a covered patio extended out from existing roof about 10x10. Don’t want the low ceiling
Yes it would be a similar way when you tie into the existing roof!
I'm trying to do this but I have a metal roof do I need to remove the panels and cut them or can I build this over it?
So that offset of 1 3/4 from the chalk line where the plywood intersect the roof is that for every valley pitch?
I see no one answered you so where I work we do 2 inches on any pitch !
How did you find the angle for the bottom ??
Wow man I really appreciate the content you put out I just joined a roofing crew and want to get myself up quick
Thanks man! I’m glad you like it.I remember when I first started working with a crew building houses, I would do anything to learn more. Thanks for watching!
If you want to save 50% or more on your next custom home, build it yourself. This channel is a great resource for learning how to acquire the permits, inspections, and knowledge to accomplish every aspect of house construction.
Learn how to buy and develop land, excavation, foundation, framing, electrical, plumbing, HVAC, insulation, roofing, siding, cabinets, trim, flooring, paint, etc. as I have done over the last four plus decades.
Great job explaining everything! Do you need to cut a larger hole in the existing roof for any ventilation of the gable into the attic?
Hi I would know how you figure the height of the post holding the ridge. On a 6 and 12
I like the very beginning when you stated exactly the correct length of framing nails to use 3-3 1/4" ring shank. Excellent work!
Thanks Randy! If you’re going to build something better build it right! I love framing. It’s nice to look back at the end of the day and see what you got done. Thanks a lot for watching!
@@TheExcellentLaborer I
[
Amazing video. Great explanation for everything.
Glad you liked it! Stay tuned!!
Great video and explaining. This is my first video of yours I’ve watched, and I’ve subscribed. 👍🏽👍🏽👍🏽👍🏽
Welcome to the channel George! I try to make a video on every project as you. I hope they serve you well!
Hi bro. On the layout for the hip and ridge . You only showed how to measure out your first layout line as you go up from the gable end at the bottom cut. How do you continue the layout being that it angels up as you go . Can you demonstrate or elaborate on how to continue that layout all the way to the top end please? thanks . I hope my question is worded correctly . Grate video though . Really very accurate and informative.
I think I understand what you were asking. Do use the same angle cut all the way up the roof. You just get the different measurements for each one that spaced out two foot apart. So ultimately it’s the same angles but the length of the board gets shorter as you go. I hope that helps! Thanks for watching
@@TheExcellentLaborer So you use your framing square like you did at 7:55 for each rafter as you build up? What about if you're doing 16" rafter spacing?
OK, Mr Laborer Josh, I have a Valley up on the roof, I'll be adding an addition down below, right in the corner where the valley drains. How could I frame a roof there ?? What are my choices? Thank you, been enjoying your videos!! Raul , PHX
I’m glad you have enjoying my videos! In a situation like that it might be best to catch the rain in the corner like usually and let the downspout do it’s job. That being said, build your roof like you normally would and then just have additional downspout added to the new roof.
@@TheExcellentLaborer NO ,No, No, No, I believe you misunderstood. The roof is "already" built, existing roof. The "addition" will be going right in the corner where both roofs meet to form like an "L" with the valley that is there "already" drains off too that corner. So How do I "roof" right there in the corner? To cover a 10 foot by 10 foot addition right in the corner? Or should I simply hire an architect or engineer? Thank You !!
Love your videos, very helpful! Set trusses over addition pop out and now prepping to build valley rafters. I can't find the span chart that you mentioned you would include in the comments section....can you help me out?
Awesome video man, very thorough and informative!
Thanks Greg! Stay tuned!
I want to add one of these, but set back about 6 feet. I'll frame my own dormer wall similar to your manufactured one... would I use tie plates like a gusset to join the lumber if lumber is placed on short side (like a rafter/truss)? If I stick frame like traditional wall, then long side of limber will rest on existing roof, which it seems like would need some sort of shim.
I would have to see what you were talking about in person. It’s hard to visualize things in text form. Thanks for watching
My sound card is blown. Does he mention reinforcing behind the end of the ridge board where it's resting on the sheathing for the roof?
What kind of wood do you use sir
Do you have guidance on how to do a valley over a 5x7 garage door?
I would do it just like I did in the video you seen here
@@TheExcellentLaborer I guess I'm stuck cause I'm using strapping and steel roofing.The truss i got with my rafters for this gable didn't look anything like i needed but the guy said it will build out to each side of my garage door.
@@TheExcellentLaborer If I want a gable over a garage door on the side of my building, what size of truss do i need, Does it need to be the same width as my door or smaller?
I am building a 30 feet by 25 feet roof and I don't want to put a post or a beam in the middle because it will Obstruct the way. So how can I do a 30 feet truss? Thank you.
hows home depot feel about the Lowe's housewrap??
I’m sure HD is not happy about it!
Great work ... can you start from the foundations?
Extra time on explaining the joining points of the wall with the concrete slab and the wall with the roof will be appreciated.
I will have to get a breakdown in a video in the future. Thanks for the comment and watching!
It’s obvious you have passion for teaching others your valuable skills and it’s greatly appreciated! You would make a great teacher 👍🏻 (SUBSCRIBED and keep’em coming please!)
I do love to pass on what I know about building. I am thankful for subscribers like you that enjoy my content. I will be sure to post more videos. Thank you!
Very cool how bad of a hassel was building them?
It really wasnt that bad. Just alot of angles and cutting. I wish my typical laborer was there to cut :) lol
@@TheExcellentLaborer lol
Is this roof just for architectural purposes? It doesn’t look like there will be a room under there. Thanks in advance!