@@creativeability The out-let /in-let pipe hole adapters are not GLUED to the drum !! This will surely leak !! Also, the Lid is not hinged with a latch facility !!
That why guy was weighing sacks on scales, which is a mistake an waste of time! They need a container with flat surface to just dill exact amount into container then screed off excess with flat blade! Make every amount exactly than same amount without weighing each, an get rid of bags!
I also done sintex tank the process with tHREE stage MATERIAL LLDPE (LINER LOW DENSITY POLYETHYLENE) LDPE (LOW DENSITY POLYETHYLENE) AND HDPE (HIGH DENSITY POLYETHYLENE) . FIRST STAGE OUT COATING TIME 30 MIN SECOND STAGE AFTER 30 MIN RUNNING ADD MATERIAL FOR INNER PROCESS TIME 30 MIN 3 STAGE COOL THE MACHINE WITH WATER OR AIR UPTO 20 TO 30 MIN AFTER COOLING OPEN THE TOP STUTTER AND TAKE THE TANK SAFELY REMOVE UNWANTED PLASTICS THE PROCESS HAS FINISH
Always buy Made in India products because our worker do more hard work while using less technology. I think Govt should help them to have access to modern technology. Jai Bharat Jai labour's.
Get big enough "wing nuts" to replace wrenches an bolt/nuts. Put a rope pulley over plastic pellet dump box so supply sacks can be lifted an dumped without having to climb up machinery each time! Flame bars could better evenly distribute heat without so much human effort. Instead of human struggle trying to removed molded unit from form, hang form up on end an let gravity release unit, you already have form an unit on overhead crane lift, just hang it straight down to release unit.
Not to tell you what to do, but I've broken every production recond at every place I've worked. Now looking at proficiency trying to work smarter than harder!
Weird technology. Much faster and cleaner is to use machine that gives sleeve of melted plastic, you close it in form/mold/matrix blow compressed air in it and in a minute you get finished product.
Khub Sundar hoyese
Trabalho artesanal muito bom. Resultado muito bom. Produto perfeito.
Big Thanks
@@creativeability ¹
@@creativeability what type of gas is used?
What's Amazing is the experience & skill that allow them to use minimal tools and come up with such wonderful work
Thank you very much!
राजु ड ठ
@@creativeability ह
@@creativeability The out-let /in-let pipe hole adapters are not GLUED to the drum !! This will surely leak !! Also, the Lid is not hinged with a latch facility !!
best 2 video link th-cam.com/video/eekaItQrHeY/w-d-xo.html
Tres simple procédé et bon travail pour nos pays en voie de développement pui- je avoir vos coordonnées et bonne continuation
Thanks sir
As
Eu pessoalmente admiro muito o povo indiano pois com poucos recursos conseguem fazer produzir e comercializar incríveis produtos. Vocês são demais
Thanks for the visit
Indian industry is lot updated than this. This is Pakistan. A industrially backward county.
F3f45
best video link th-cam.com/video/UcisBdfIrHc/w-d-xo.html
EXCELENTE!!
Thanks for the visit
Informative and interesting video
Thanks
best 2 video link th-cam.com/video/eekaItQrHeY/w-d-xo.html
Simple procedure & low cost but in market its too much expensive. Why? How to get in low price from manufacturers?
Thanks for the visit
the reason is so expensive the cost to buy the machine that has the flames and spins is 45k USD
and each double barrel is around 2500 USD each.
best video link th-cam.com/video/UcisBdfIrHc/w-d-xo.html
@@vudeulash7645 saa
.
. . ...........................qqqqqqqqqqqqqqQaQAqqqqqqq
Wow great promotion 👍 respectfully
Thanks for the visit
Thanks alot for share this type of video
Glad you liked it
ننتبه نةنصت
نتمنى ا. ؤلكا
Hello very fantastic work. 👏
Thanks for the visit
best 2 video link th-cam.com/video/eekaItQrHeY/w-d-xo.html
Aise video share krne ke liye apka tahedil se sukriya🙏
best 2 video link th-cam.com/video/eekaItQrHeY/w-d-xo.html
Video proof good. Man work very 👍🙏. I m deaf.
Sorry for that
Wow it's making very nice so hard working
Thank you so much 😀
Very good Excellent Workers are Skillful hard working
Yes, thanks
best 2 video link th-cam.com/video/eekaItQrHeY/w-d-xo.html
Wow good work bro
Thank you so much 😀
ماشااللە بہت پیاری ویڈیو دیکھنے کو ملی الله آپ سمیت ہم سب کو کامیابی دے آمین
Thanks for the visit
NICE TECHNOLOGY
Good idea ,but showing very low Quality ,,,,not durable ,,, - Mixed Stone powder too much ,,,,
Ok thank you
nice job !
Thanks for the visit
best 2 video link th-cam.com/video/eekaItQrHeY/w-d-xo.html
Amazing - great 👍 - the amazing part to me is getting the exact amount of material so it’s not too thick or thin
Great to hear!
That why guy was weighing sacks on scales, which is a mistake an waste of time! They need a container with flat surface to just dill exact amount into container then screed off excess with flat blade! Make every amount exactly than same amount without weighing each, an get rid of bags!
GOSTEI MUITO DO SEU TRABALHO ! PARABENS.
Nice process but there is no safety precautions
Nononono👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎
best 2 video link th-cam.com/video/eekaItQrHeY/w-d-xo.html
نامکمل معلومات ہیں
th-cam.com/video/y47WRiGM5Sw/w-d-xo.html
I also done sintex tank the process with tHREE stage MATERIAL LLDPE (LINER LOW DENSITY POLYETHYLENE) LDPE (LOW DENSITY POLYETHYLENE)
AND HDPE (HIGH DENSITY POLYETHYLENE) .
FIRST STAGE OUT COATING
TIME 30 MIN
SECOND STAGE
AFTER 30 MIN RUNNING
ADD MATERIAL FOR INNER
PROCESS
TIME 30 MIN
3 STAGE
COOL THE MACHINE WITH WATER OR AIR UPTO 20 TO 30 MIN AFTER COOLING OPEN THE TOP STUTTER AND TAKE THE TANK SAFELY
REMOVE UNWANTED PLASTICS
THE PROCESS HAS FINISH
شكرا باكستان انا سعد من السعودية احبكم كثير,,،
Thanks
Nice video, give the raw materials description used in each step in between the video.....thanks
Sure 👍
0
L
@@creativeability Ll
best 2 video link th-cam.com/video/eekaItQrHeY/w-d-xo.html
What mould is this Rotomould or Blow mould. Grade & quality of material used should be defined during process of mould.
Thanks or the advising
Super bro 👍👍👍👌👌
Super
எஆஅஆஊஎஎபா எஊ
Enki mehanat aur Kaam ko salute karta hu .
Big Thanks
Can I visit this factory? Please guide me the location
Multan Pakistan
@@creativeability shukran will prepare for one
best 2 video link th-cam.com/video/eekaItQrHeY/w-d-xo.html
@@creativeability hello, could help us to geht drawing for this technology ?
@@creativeability where in multan bro
Aprreiated But Fist of All safety very important
Always buy Made in India products because our worker do more hard work while using less technology. I think Govt should help them to have access to modern technology. Jai Bharat Jai labour's.
best video link th-cam.com/video/UcisBdfIrHc/w-d-xo.html
Bon travail merci beaucoup
Wow Amazing
Many many thanks
🙏🙏🙏🙏🙏
Salam dari Indonesia.🙏
Hi
Vimlesh
Are bhaiya ji tumne shop pata bol raha hai aapka number tasvir bhejo na
Bhaiya ji ham vimlesh operator bol rahe hain
Oohhh.... Mantap Bosque
👏👏👍👍👍👍👍🇮🇩🇮🇩
Thanks a lot
Gostei desse serviço trabalho muito sofrido vcs não trabalham sem com proteção nenhuma é perigoso acidente
b by ui 4 hm mg3 jl me lষভ
best 2 video link th-cam.com/video/eekaItQrHeY/w-d-xo.html
Hats off to that hard work technicians 👏👏👏👍🙏
Thanks a lot
Amazing.
Glad you think so!
Thanks for teaching me
No problem
Great
Thanks
best 2 video link th-cam.com/video/eekaItQrHeY/w-d-xo.html
Amazing job
Thank you! Cheers!
Woo amazing supper
Thank you so much
Wowww Super 👏👏👌👌👌
So Nice
Wow that's awesome
Hard work🙏🇮🇳
Great work😇
Thanks a lot 😊
@@creativeability welcome💐💐
best 2 video link th-cam.com/video/eekaItQrHeY/w-d-xo.html
good work
Thanks
Good job
Please use PPE
So nice
Get big enough "wing nuts" to replace wrenches an bolt/nuts. Put a rope pulley over plastic pellet dump box so supply sacks can be lifted an dumped without having to climb up machinery each time! Flame bars could better evenly distribute heat without so much human effort. Instead of human struggle trying to removed molded unit from form, hang form up on end an let gravity release unit, you already have form an unit on overhead crane lift, just hang it straight down to release unit.
Thanks for watching & Advising
Not to tell you what to do, but I've broken every production recond at every place I've worked. Now looking at proficiency trying to work smarter than harder!
One like for workers who works hard
So nice
@@creativeability sir can you promote my channel please
@@creativeability th-cam.com/channels/5OOPensGpCKYUWMSniFiMA.html
@@creativeability request to you sir
👌👌👌👌👌👌Hats off for your hard work
Thanks for the visit
Great my boss is cool 👍👍
So nice
for my boss brothers 🙏🙏
Incredible work.
Glad you think so!
Hard working👨💻
Always
best 2 video link th-cam.com/video/eekaItQrHeY/w-d-xo.html
how can i buy such as these machines ?
where from ?
Very hard work bro
So much
Great 👍👍👍👍
Thanks for the visit
best video link th-cam.com/video/UcisBdfIrHc/w-d-xo.html
يسلمووووو فن ذوق روقان اجمل ما يكون اول مره اعرف عن هذا العمل تشكر يا هندسه
Pp
P
Sundaythe
best video link th-cam.com/video/UcisBdfIrHc/w-d-xo.html
Appreciate work, but put on safe guards like nose mask, hand gloves, helmet, full shoe etc. Factory or labour officer is not visiting.
Thanks for appreciating. your are saying write
Bhaut mehnat hai bhai
So nice
zbrdast good work hardworking
Many many thanks
Super. Iomokoi
Solid work, wel done
Much appreciated
Good skill
Respect for the work and workers
Good sir
So nice
Very
Very
Very
Nice.
Thank you so much 😀
Thanks a lot
Bahut mehenat ka kam he bahut heet jelne padti hogi
Thanks
Hard working labours, no safety .
👍❤️👍❤️
Kiya ya kaam ak darma ke dai ky sat shuro kiya jasakta hai aur kitny pesy lagty ha
G Han yah kam 1 dai say ho sakta hay 70 say 80 lakh main laikn mean masala markeet main bechna hay wahan pr paesa zeyada invest karna parta hay
WOOOOW YOU
खुप छान
Is that first plastic bids are recycled?
It come from the plastic market
But is it recycled? Of fresh?
best 2 video link th-cam.com/video/eekaItQrHeY/w-d-xo.html
What plastic matérial are you using ?
Can i use this video?
Working in these temperatures without PPES?
Not good intermz of life even youtu.be/ jpIpPiM8u6A
Saran saya buat perahu dari bahan plastik,barangkali banyak yg minat🙏🙏
Amazingly slow production compared to injection molding.
Great point!
I think injection molding requires more expensive equipment, raw materials and energy costs
Dont forget, you are watching a Pakistani Industry, and expecting more than this is a crime.
Pakistan me itna hona bhi bahit hai
Pls control Wastage of sui gas other sources pls try
So nice
Weird technology. Much faster and cleaner is to use machine that gives sleeve of melted plastic, you close it in form/mold/matrix blow compressed air in it and in a minute you get finished product.
~
.
Thanks for the advising
@@mohanmodhave5097 I see. So ~ • • ~ to you.
best 2 video link th-cam.com/video/eekaItQrHeY/w-d-xo.html
Super👌
Thank you
💯👍🏻💯👍🏻💯👍🏻❤❤
Bagus 👍🙏
place and seal lid on prior to securing bulkheads.
Ok Thanks
@@creativeability as
best 1 video link th-cam.com/video/UcisBdfIrHc/w-d-xo.html
Sheet used for mould and its thickness.
What mean
👍👍👏
nice work
Thanks for the visit
Vimlesh operator bolna hai Jara apna number ISI number bhejna
Excellent
There are few steps that have to be automated to avoid manual works.
Absolutely
Nice job
I tried
Nice
Thanks
th-cam.com/video/UcisBdfIrHc/w-d-xo.html
یہ لوگ اتنی سخت محنت سے دیسی طریقے سے کام کر رہے ہیں اگر حکومت ان جیسے محنت کشوں کے ساتھ تعاون کرے تو بہت اچھا رزلٹ بھی دے سکتے ہیں
Your good Opinion
Super working........... no safety............ God bless the laborers
Yes, thanks
No sefty ,no mask
Time pass corona
Nice 👌 ✅👍🔔
Thank you 👍
@@pardesizindagi6076 8ilyas: les ⁹9etdďedeeezeeďdďdd de ź Zara ²9ont de ppppppppppppppppppppp 0⁰
Ésßee
Very nice video
So nice
Thanku ji
Glad you think so!
best 2 video link th-cam.com/video/eekaItQrHeY/w-d-xo.html
Wow
So nice
Excellent brother.
Many many thanks
th-cam.com/video/CFI44pukoFE/w-d-xo.html
Félicitations !