Inductrix FPV Plus Combo graysonhobby.com/inductrix-fpv-bnf-beginner-drone-racer-fpv-combo.html Best Goggles For a Beginner (that work) graysonhobby.com/eachine-vr-007-fpv-goggles.html
I really like Horizon products. My factory props were loose, too. The replacements fit great. If you are in a pinch, though, you can slide a piece of flat dental floss into the prop, place it on the motor shaft, and trim it. Works pretty well.
Yeah, the props that come with the FPV Plus are loose fitting. I swapped them out right away with a replacement set that I purchased and those fit tight and will not come off. I fixed the original props by putting in a dab of wood glue and then using a small punch/needle of the same diameter of the motor shafts. Those now fit just as nice as the replacement props. Upgrading to a 600mAh battery gave me 2 more minutes of flight time (total of 8 minutes) and it flies faster and responds better.
Great review! Very thorough while being quite entertaining. Appreciate the controller and goggle setup part, being new to fpv and bnf aircraft, that was quite helpful.
Thanks for the review on the drone! I recently got a fpv+ and couldn’t get it to arm. This video helped a lot and now i am flying it around all the time and sometimes even scaring the absolute shit out of my cats😂
Guys i love your videos tey arr super helpfull when i first got mi inductrix dint have a proper bing mi meow mode wasnt working mi modes werent working now thanks to ur video i have a proper set up thanks alot guys ur guys are grate 💪🏽👌🏽✌️👍🏼
I tried to bind my ZORRO to my little Blade Inductrix FPV+ using the "Quad" model already in the menu, (it binds to my Spectrum Dx6i DSMX with no problem), it seems to BIND to the zorro, but I can get no action from the quad, and a constant Telemetry lost/recovered warning? I do not see the fine tune option showing? I am Brand new to the Radiomaster Zorro, and It is fresh out of the box with the Full 4 in 1 protocol. I can get it to work with my Simulator fine. Where do I start? I cannot find much help in the manual. Any thoughts?
Eightball You were great I liked what you said, But the blades keep falling off. I got a lot of Drones and they don't to that. So is there anything I can do? you need to do more interviews. Thanks
Where can I find some props for this ?? I tried the eachine 40 mm 4 blades for the fat bee and it barely lifts off and then does something crazy ! Uncontrollable do u know what kind to get ??? Please help I wanna fly this thing !!!!!
(HELP!!!) I have the Inductrix fpv + using my taranis with the drx orange module. I have setup a new model and set it to external module and have it binded to the whoop, my mode switch works cause the whoop colors change when I use a three position switch. The white lights in the front are still blinking letting me know that it's not armed but I can't put it on a switch to arm it what am I doing wrong?????
Hey UFDA Crew! I have been struggling for weeks with this thing. I have the Orange module with the dip switches. If you have too, then switch the switches 3 and 5 to on. For arming it has to be channel 6 assigned to the right shoulder (2 way) switch. Hope it works! Finally got mine working today! Happy Flying! th-cam.com/video/CYsYgSVnmA8/w-d-xo.html
Kyle: The FPV plus has larger props (40mm) , a larger battery (more flight time), better and larger 8mm motors (faster and more responsive), the camera is higher with a wider field of view so you can go full speed and still see everything. Also, additional weight was a concern for the original FPV, where this model has more than ample power to weight ratio...and you could upgrade from the 8mm motors to 8.5mm motors pretty easily with this frame and a little work.
Mine got nearly football field away (I was in the endzone of my local high school's football field and was losing connection at about the 10 yard line at the other end). I replaced my antenna with the Airscrew Race Spec by iBcrazy and I was able to keep connection well beyond the other endzone.
Inductrix FPV Plus Combo
graysonhobby.com/inductrix-fpv-bnf-beginner-drone-racer-fpv-combo.html
Best Goggles For a Beginner (that work)
graysonhobby.com/eachine-vr-007-fpv-goggles.html
I really like Horizon products. My factory props were loose, too. The replacements fit great. If you are in a pinch, though, you can slide a piece of flat dental floss into the prop, place it on the motor shaft, and trim it. Works pretty well.
How well does it hold? Gonna be a little bit till I can get replacement props and all I'm doing are popping off when I land hard...."crash" !!
Logan F thanks man that helps
Yeah, the props that come with the FPV Plus are loose fitting. I swapped them out right away with a replacement set that I purchased and those fit tight and will not come off. I fixed the original props by putting in a dab of wood glue and then using a small punch/needle of the same diameter of the motor shafts. Those now fit just as nice as the replacement props.
Upgrading to a 600mAh battery gave me 2 more minutes of flight time (total of 8 minutes) and it flies faster and responds better.
Which brands??
RacingND FPV i did too
Thanks for the review! I just set up my recently-purchased FPV Plus with your walkthrough and it was easier than using the (tiny) book.
This video was a huge help. These are down to $99 now and they are alot of fun
Great review! Very thorough while being quite entertaining. Appreciate the controller and goggle setup part, being new to fpv and bnf aircraft, that was quite helpful.
Great review and super helpful setup!! Thank you!!
Hopefully they will make one to work with FrSky. Excellent video Will & Basil!!
My stock FC developed a progressive drift to the left on the second battery. A BeeBrain V2 fixed that.
Nice job guys.....Love your reviews. Keep it up ⭐️⭐️⭐️⭐️⭐️
How about binding with the dxe
im am having that exact issue right now
Pretty__ nice_guy it works!
Thanks for the review on the drone! I recently got a fpv+ and couldn’t get it to arm. This video helped a lot and now i am flying it around all the time and sometimes even scaring the absolute shit out of my cats😂
Guys i love your videos tey arr super helpfull when i first got mi inductrix dint have a proper bing mi meow mode wasnt working mi modes werent working now thanks to ur video i have a proper set up thanks alot guys ur guys are grate 💪🏽👌🏽✌️👍🏼
I tried to bind my ZORRO to my little Blade Inductrix FPV+ using the "Quad" model already in the menu, (it binds to my Spectrum Dx6i DSMX with no problem), it seems to BIND to the zorro, but I can get no action from the quad, and a constant Telemetry lost/recovered warning? I do not see the fine tune option showing? I am Brand new to the Radiomaster Zorro, and It is fresh out of the box with the Full 4 in 1 protocol. I can get it to work with my Simulator fine. Where do I start? I cannot find much help in the manual. Any thoughts?
I know it's a very late comment but I'm a beginner and this drone is on sale at my local shop. I was wondering if I can bind this with a tx16s radio?
Thanks for you setup videos. You guys are great!
sir is this inductrix plus can bind to my DXE spectrum?
thank you forthis its great
Thanks so much guys help me so much I love my inductrix plus and pro you guys are very helpful 👌
Thank You very Much!
For those that don't know, the Eachine M80 is an exact clone of this drone. You can get the M80, along with 3 lipos for under $60.
Thanks for your insightful and informative reviews.
Eightball You were great I liked what you said, But the blades keep falling off. I got a lot of Drones and they don't to that. So is there anything I can do? you need to do more interviews. Thanks
I called Horizon and they sent me a new set of props....fit much better
Mine won’t fly I turn it on the wings move but it won’t move how do I fix it?
I really want to know , how to bind with the SPEKTRUM DXe .
How do I connect an inductrix blade drone to a spektrum training controlle?
Where can I find some props for this ?? I tried the eachine 40 mm 4 blades for the fat bee and it barely lifts off and then does something crazy ! Uncontrollable do u know what kind to get ??? Please help I wanna fly this thing !!!!!
can we solder our own rx, such as radiolink's ?
I've been trying to get my fat-shark domination V5 binded to this all day ....... I'm not even close to getting a screen .
Use Auto Search / auto scan
Can I bind it to a RadioLink AT9 without any mods?
What props do you recommend for the inductrix +, stock ones don't stay on? Thanks, Gary
can this quad bind to an AT9S?
(HELP!!!) I have the Inductrix fpv + using my taranis with the drx orange module. I have setup a new model and set it to external module and have it binded to the whoop, my mode switch works cause the whoop colors change when I use a three position switch. The white lights in the front are still blinking letting me know that it's not armed but I can't put it on a switch to arm it what am I doing wrong?????
Hey UFDA Crew! I have been struggling for weeks with this thing. I have the Orange module with the dip switches. If you have too, then switch the switches 3 and 5 to on. For arming it has to be channel 6 assigned to the right shoulder (2 way) switch. Hope it works! Finally got mine working today! Happy Flying! th-cam.com/video/CYsYgSVnmA8/w-d-xo.html
Great Review!!!!
I have a dxe will it work with it or do I need to buy a new transmitter I know the normal fpv works with it
Yes will work fine
What is aux6 channel doing and why does it need reverse? Also are the props bigger on the plus model than the 6mm original inductrix's? Thank you!
It's the push button switch, arms the motors and if you don't reverse it, it will start the motors as soon as you plug the battery.
i bought one of these day 2 it doesnt go into bind mode, just slow blink went i power it up.
Turn on Radio 1st - but make sure you have a Spectrum Radio
can this bind to a fly sky fs-i6? heard the original inductrix doesn't. thanks guys!
Great question! but unfortunately this will ONLY bind to Spectrum or any radio with multi protocols.
graysonhobby.com/irangex-ir8m-trasnmitter.html
Grayson Hobby thanks for the reply! Fortunately I found a spectrum DX4e transmitter tucked away with an old plane. 😁
Is there any different between this one and the normal smaller one?
Kyle: The FPV plus has larger props (40mm) , a larger battery (more flight time), better and larger 8mm motors (faster and more responsive), the camera is higher with a wider field of view so you can go full speed and still see everything. Also, additional weight was a concern for the original FPV, where this model has more than ample power to weight ratio...and you could upgrade from the 8mm motors to 8.5mm motors pretty easily with this frame and a little work.
Hi guys. Outside the Inductrix which FPV indoor quad would you guys recommend? Thanks in advance.
This can fly outside - Not on extremely windy days, but most days with < 10 MPH you can fly this with ease.
good video thanks for the help
opinion on this vs inductrix pro? Pros/Cons?
This - The inductrix pro was a flop -
What's the average run time you have been getting?
Josh Maxwell over 4 mins inside, been raining, so have not had any outdoor flying yet
3-4 mintues easy flying - 2-3 hard flying. (get lots of batteries)
Is there a true Acro mode?
there is no betaflight
That is the kind I wood buy
Control range of this drone is ??
Way further than the Video : ) This is a micro and is intended for close flying...
Grayson Hobby so around 100m?
never flown this 100m away... its really not intended to fly that far, but I suppose under the correct circumstances, it could..
Grayson Hobby ah, ok! Thanks. Im looking for the perfect tiny whoop.
Mine got nearly football field away (I was in the endzone of my local high school's football field and was losing connection at about the 10 yard line at the other end). I replaced my antenna with the Airscrew Race Spec by iBcrazy and I was able to keep connection well beyond the other endzone.
Funny as hell hes flying in altitude hold mode and saying...throttle feels funny lmao
There is no altitude hold on this model. Or Any respectable drone racer LOL
run time, exactly?.......
Over 3 mins inside... Closer to 2 outside
Mine gets 5-6 Minutes on the 500mAh battery it comes with, ~8 minutes with the upgraded 600mAh battery.
great video. huge help
This is stupid the quad doesn't come with the dx9 you should have walked people through it with the radio it comes with (MLP6DSM)
Or you can watch horizon videos