Disclosure : I may be an affiliate of any product shown or tested here on the channel. It may have been free or given to me by a discount. Either way. It is my duty to you the viewer to give an honest, unbiased opinion on an item. I’m pretty straight forward. If something sucks I will let you know. If you choose to purchase a product from a link here I may benefit from a small commission. Or may not if it is a company who just sent it for a one time review. I don’t get paid for making a video. So to those of you who do support the channel I want to say thank you in advance. Please keep watching and I will keep up the great videos!
Their are better ways to unsolder, but the suction is easy available and cheap. One tip I found is notch a little "V" out of the tip just big enough for the tip of the soldering tip you use most for this work. This helps you get a better suction and the nylon auction tip closer to the PCB for removing solder. Just thought I would share, give it a try. If you don't like it you can buy replacement tips for cheap.
At about 14:08 you mention aux 5 to be freaking out and that you can solve that with a setting on the radio, could you please explain that as well? Would that solve the swamping issue?
Justin, you really need to rename this video ‘Eachine SPRACING F3 whoop’ I spent days looking for this information and wasn’t until someone shared this to me ...
I bought the Beecore Upgrade V2.0 Brushed F3+OSD Flight Control Board that I think has betaflight firmware pre configured. Do I have to flash my firmware?
I've completely followed this video, and whenever I try to take off, my motors won't have enough lift, and the whoop will just fall to the side. I've tried switching props an everything. Any suggestions? They would really help, I, just getting into the hobby. Thanks !
I ordered the 4pcs battery pack from your link. Should I buy a power connector for this setup? Or the connector comes with the kit can be used with this battery? Thank you.
Hi. I need help on my eachine qx65. Looks similar to the tiny whoop you built on this video and looks like you can help me. Im having issues binding the dsm2 transmitter to the receiver. I tried the manual and looks like it binds but it does not response to the transmitter commands. What could it be? Never done this kind of biding before.. thank you much.
Could you please tell me where you got those thumb pad stick ends in your remote? I have seen those here and there and have searched everywhere for them!
All these videos I watch on how to, never work the same for me. Everybody makes it look so easy. The soldering part is easy but when it comes to flashing firmware and downloading programs to my 💻 never work for me.
Disclosure : I may be an affiliate of any product shown or tested here on the channel. It may have been free or given to me by a discount. Either way. It is my duty to you the viewer to give an honest, unbiased opinion on an item. I’m pretty straight forward. If something sucks I will let you know. If you choose to purchase a product from a link here I may benefit from a small commission. Or may not if it is a company who just sent it for a one time review. I don’t get paid for making a video. So to those of you who do support the channel I want to say thank you in advance. Please keep watching and I will keep up the great videos!
Excellent build video Justin!! Since I never built one, now will be the time :)
Great build video. Looking forward to ordering a kit and necessary supplies to build my own tiny whoop. Thanks, Justin!
You're welcome Gene
Are you a teacher in real life because you just taught me alot thank you so much!
I don't know why but I started seeing videos from 2015 to 2016 , and how we built a whoop quad with the parts we had
Hey Justin, is there a more recent version of a build video similar to this? Great channel, thanks.
Thank you awesome guide. Just got mine in and building now.
Their are better ways to unsolder, but the suction is easy available and cheap. One tip I found is notch a little "V" out of the tip just big enough for the tip of the soldering tip you use most for this work. This helps you get a better suction and the nylon auction tip closer to the PCB for removing solder. Just thought I would share, give it a try. If you don't like it you can buy replacement tips for cheap.
At about 14:08 you mention aux 5 to be freaking out and that you can solve that with a setting on the radio, could you please explain that as well? Would that solve the swamping issue?
Justin, you really need to rename this video ‘Eachine SPRACING F3 whoop’
I spent days looking for this information and wasn’t until someone shared this to me ...
Great how to vid 👍👏
I maybe lazy to miss what receiver you've used on this. Awesome tutorial for newbies like me btw. :-)
I bought the Beecore Upgrade V2.0 Brushed F3+OSD Flight Control Board that I think has betaflight firmware pre configured. Do I have to flash my firmware?
Hi Drone Camps. Can you leave a link where you can buy the connector you showed that's the middle one. Looks like the smaller one but bigger. Thanks.
I've completely followed this video, and whenever I try to take off, my motors won't have enough lift, and the whoop will just fall to the side. I've tried switching props an everything. Any suggestions? They would really help, I, just getting into the hobby. Thanks !
I ordered the 4pcs battery pack from your link. Should I buy a power connector for this setup? Or the connector comes with the kit can be used with this battery? Thank you.
Hi. I need help on my eachine qx65. Looks similar to the tiny whoop you built on this video and looks like you can help me. Im having issues binding the dsm2 transmitter to the receiver. I tried the manual and looks like it binds but it does not response to the transmitter commands. What could it be? Never done this kind of biding before.. thank you much.
Does this also work with spectrum transmitters?
Did you create the F36 model on the Taranis X7 yourself?
I have an acrowhoop V2 and I have no similar board in the drop down menu, which one do I choose?
If your not good with an Iron, I just strip off some small wire and bridge the boot loader.
How you fixed the issue with aux 5? I have the same problem.
Could you please tell me where you got those thumb pad stick ends in your remote? I have seen those here and there and have searched everywhere for them!
Bestem Aerial
I need help setting up a throttle curve
Why do we need to flash the flight control board? Sorry I am kinda new to this hobby.
V P They always come with an older software
so will the flight board work with the furibee transmitter without flashing the board ?
Yep. It will.
In BetaFlight, Is it Spracing F3 if useing the Flysky Version
So with this setup you can fly acro?
yes you can
gateway drones😎
All these videos I watch on how to, never work the same for me. Everybody makes it look so easy. The soldering part is easy but when it comes to flashing firmware and downloading programs to my 💻 never work for me.
Cory Venezia same here 😒
first!