thank you very much this will help i need to do the drivers side on my tuscon n this bein for the same year hyundai should be the same process , thanks
Mine didn't work the first time found that if I pressed on the big resistor next to the plug with 2 wires it would come on. Took it back to the bench and soldered that resistor again and it worked great.
Fixed it!! Thanks. Small tip: I used an oscillating saw to cut out the hole. It worked great.
That would make a cleaner cut (I don't have one). Glad I could help
Thanks this saved me some money. Fixed both taillights
Great to hear!
Thank you very much for this video! I was able to repair both sides because of you!
glad I could help
hi is it also possible to buy a new board my soldering skills suck
if you find the circuit board number you can try and do a search for it, you might get lucky
Is there a unit that can replace this after market if so any suggestions?
you can try www.vland-official.com
thank you very much this will help i need to do the drivers side on my tuscon n this bein for the same year hyundai should be the same process , thanks
No problem 👍
I fixed the round light but I couldn’t the little side marker …. Any way I’m happy with the results ….thanks for the video
Glad it helped
Mine didn't work the first time found that if I pressed on the big resistor next to the plug with 2 wires it would come on. Took it back to the bench and soldered that resistor again and it worked great.
Thank you so much !!!
You're welcome!
Forget that buy a new one.
new one was over $400. or buy a pair of after market for about the same