The Aqara Curtain Driver E1 - Got curtains? Make Them Smart!
ฝัง
- เผยแพร่เมื่อ 7 มิ.ย. 2024
- The Aqara Curtain Driver E1 follows in the footsteps of the Roller Shade Driver E1, in as much as it's a retrofit option (in the former's case) to control your curtains. The E1 isn't the first to market with such a device, as both Switchbot and ZemiSmart have had these kinds of motors for a while. That said, at the time of this video, only the ZemiSmart option has HomeKit compatibility, with Switchbot relegated to using HomeBridge for the time being. So, how does it compare, and is a retrofit device worth going for over motorised curtain tracks? Watch to find out.
🖥 You can also read our full written review here - wp.me/p9NnDL-8tZ
You can buy the Aqara Curtain Motor E1 from Amazon.com using the affiliate links below, at no extra cost to yourself, whilst also helping out the website & channel;
🇺🇸 Amazon.com - amzn.to/3uAyU7L
🇬🇧 Amazon.co.uk - amzn.to/3RhUS9o
🇨🇦 Amazon.ca - www.amazon.ca/dp/B0B127THJ7
🇫🇷 Amazon.fr - amzn.to/3ytgkj0
🇩🇪 Amazon.de - amzn.to/3RcPRPg
🇮🇹 Amazon.it - amzn.to/3uAeADr
🇪🇸 Amazon.es - amzn.to/3amm9Hc
--------
🇸🇰 You can also buy from smarterhome.sk if you're in Slovakia (not affiliate links);
- track version
smarterhome.sk/en/xiaomi-aqar...
- Rod Version
smarterhome.sk/en/xiaomi-aqar...
--------
You can also check out our videos for the;
* Aqara Roller Shade Driver E1 - • Aqara Roller Shade Dri...
* ZemiSmart Curtain Controller - • The ZemiSmart Curtain ...
* ZemiSmart Roller Blind Driver - • The ZemiSmart Zigbee R...
* Omnia Smart Blinds with Thread - • Omnia Smart Blinds - T...
Check out our website for all the latest HomeKit related News, Reviews, Listings, Tutorials and more - homekitnews.com
Timestamps:
0:00 Intro
0:12 overview
0:46 What's in the Box?
1:21 A closer look
1:48 Hardware installation
2:22 Adding the E1 to Aqara & HomeKit
2:51 Basic remote operation
3:31 The E1 in Home/HomeKit
3:46 The ambient light sensor in use
4:09 Manual open & close feature
4:21 Motor noise test
4:37 Pros & Cons
5:32 Outro
You can also Follow us on the following social media platforms;
- Facebook : homekitnews
- Twitter : infohomekitnews or @infohomekitnews
- Instagram : / homekitnews
- Reddit : / homekit-news
#homekit #smarthome #homeautomation #aqara - วิทยาศาสตร์และเทคโนโลยี
![[Teaser EP.2] “MasterChef Junior Thailand Season 3” วันอาทิตย์ที่ 9 มิ.ย. นี้ 6 โมงเย็น ทางช่อง 7HD](http://i.ytimg.com/vi/KojBzrifbWg/mqdefault.jpg)
Don't forget, you can also find us on the following social media platforms;
Facebook: facebook.com/homekitnews
Twitter: twitter.com/infohomekitnews or @infohomekitnews
Instagram: instagram.com/homekitnews/
Reddit: www.reddit.com/user/HomeKit-News
🖥 Check out our website for all the latest HomeKit related News, Reviews, Listings, Tutorials and more - homekitnews.com
Great review Simon, as always. That transparent curtain effect at 3:12 was epic! Nice job! 👏🏼👏🏼 🙌🏻 🙌🏻
Cheers Shane, always a pleasure to get a nod from you 😊!
Completely agree with the transparent effect being a great hit!
Simon, I am a big fan of your reviews. Specifically, your use of a standardized format makes it easy to compare items across reviews. I also value the use of specialized tools, such as your decibel meter for items that have some noise to them. Keep up the great work!
Thanks! It's funny but I hadn't thought too much about how the videos are sort of standardised, but yes I guess it must help.
As always, fantastic video review. 🤩🙏
Thanks very much! 😊
Hi Simon great video. Have you looked at SmartWings blinds. I have 7 currently and need to get 6 more! they are awesome and work direct with homekit and will have thread soon. But really you don't need thread for blinds.. I think you should have a look. and they are priced very reasonable and each one is custom made to your sized and the have a good fabric choice.
Hi, glad you enjoyed the video. Yes, I’m aware of SmartWings. They contacted me towards the end of last year, but I don’t have anywhere to test more blinds at present, so I had to decline their offer of a review unit. Hopefully I can figure something out when they release their Thread versions, which is what I enquired about when they first contacted me.
Nice review! Do the curtain driver bring any events/triggers in HomeKit automation when using native Home app? And how about shortcuts in automation, which curtain state info can you get in shortcuts by using “get state of home” action, can you e.g. check if the curtains are open/closed?
Hi, the curtain driver gives you the same options as other window coverings, so basic open/close including percentage, which is also the case for triggers in automations. As for Shortcuts (within Home) you
get the following options regarding the state of the device; current position, custom, name, obstruction detected, position state, and target position.
About time
Do you need 2 of theses if you have a curtain either side that close in the middle ? Many thanks
Yes, that’s right. One per curtain.
This one look like the mijia model. Sadly the aqara doesnt sell on aliexpress, the main importer of smart thing to my country
Hi. I think i have the first version hub of aqara, looks like it wont find the driver. Is the first hub not compitable ?
Hi, most Zigbee 3.0 devices will now only work with Zigbee 3.0 Aqara hubs, with one or two exceptions. I’ve just double checked and even though I still have the original hub, it doesn’t show up as a hub option when going through the process of adding the curtain driver E1. The original hub is Zigbee 1.2.
hey ... I've got vertical blinds at home and office. do you think this would work. How about producing video. the only option I have at the moment is very expensive and have to order the motor and tracks with the blinds.
As long as the tracks for the vertical blinds are the same type used for curtains (I-Rail or U-Rail), then it should work, although it would only be able to push and pull them, not adjust the angle.
Is it louder than the Zemismart or Switchbot? Is sounds really loud on film?
It slightly louder than the ZemiSmart version, but then it’s a lot faster. I don’t have the Switchbot to compare it to.
Hi. Do you know if I can use my samsung smartthings bridge instead of an aqara bridge?
No, it’s not possible.
Very similar to the Mijia model ! Whats the difference ?
The Mijia version uses Bluetooth, and is also not compatible with HomeKit, whereas the Aqara model is HomeKit compatible and uses Zigbee 3.0.
Hi, this may be stupid question 😀… for split curtains… I need 2 of these units right?
Yes, that’s correct. Each motor only controls 1 curtain.
@@homekitnews Thanks a lot…
Does this have matter support now?
It should do if you connect it to a Matter enabled Aqara hub, although last time I checked, Amazon is one Matter platform that doesn’t support window coverings. HomeKit does.
Hey, nice review! I wonder how the E1 would show on HomeKit for double curtains. Not sure if there’s a way to merge both E1 into one single tile
Hi, that’s a good question. I think for the purposes of HomeKit, each motor shows a pair of curtains for the icon, so if you had two of these motors, you’d get two tiles. However, in HomeKit you can group items of the same type, so in this case you’d group the two motors, and they’d simply appear as one tile. They should also open and close at the same time, but in the Aqara app there’s also an option to sync a pair of motors, which would probably help too.
@@homekitnews if you set them as a pair in aqara would that not just expose a single device? Not that it matters much because as you say you could just create a group. I’ve just ordered one, do you know if it works with the E1 USB hub?
Hi, I only have the one motor for this review, but in the Aqara app it doesn’t exactly say it groups them, it’s more of a sync option within the app, so I still think that in HomeKit you would see two separate devices until you grouped them in HomeKit.
That 20% discount applies to which stores?
Hi, this would be for Amazon stores only, but that offer was only at the initial product launch, so I should remove that text, sorry.
Damnit. I've been wating forever for these. Bought two, and paired them with Home Assistant through Conbee 1 Zigbee stick. Does not work at all :( Pairing goes through but the buttons/services wont do anything.
Decided to try with the Aqara E1 Hub that came with the bundle. The drivers wont even pair with that.
Not too happy with the product at the moment.
These should work with the E1 hub, although I’ve heard some people have had issues connecting them. The best thing I’ve found is usually resetting, then resetting again, and just leaving them for a while, before attempting to add them to an Aqara hub. I haven’t had to do that with these devices, but very occasionally I’ve found this to be the thing to do in cases like this.
Also had issues pairing with the Conbee II over deCONZ, Phoscon, and Home Assistant. In the end, I decided to purchase the Aqara E1 hub. Paired very easily. However, now the challenge is that I'm having very large curtains and it seems the motor cannot pull their weight. Hoping that a full charge will fix that.. :-)
Looks good but a bit expensive I’d say
They are more expensive than switchbot, but I’ll happily pay the extra to keep a device on zigbee. Also I’d much rather have to have an aqara hub which has a larger product range than have to have the switchbot hub. The more use I get out of them the less annoying they feel.
@@sulylunat yeah good point, I would definitely get my money’s worth!
hate zigbee hub, extra cost!