This is an excellent video, thank you very much. It was the most helpful video I have seen on how to replace the resistor. I hope you make many more videos for us to learn from and enjoy. Best wishes.
i have exactly the same problem you had. speeds 1 2 3 do not work, except 4 which is noisy and loud. Meanwhile, are you able to do a video on brake pedal going soft losing pressure and ABS issues. A video to replace and address this problem will be helpful. I suspect the brake pedal maybe due to a failing master brake cylinder whose internal seal has given way. Because there's no fluid leaks at all. Fluids level stays the same. The first time i step on the pedal, it is straight soft nearly to the floor and i have top pump like 2 times in order to build the pressure. But holding the pressure on the pedal gives way to soft pedal. I asked a friend of mine that very old dot 4 fluid can cause loss of pressure? Is this likely? the fluid has never been changed for 5 years but the car has only since been driven for 6000 km since.
Hi. You might also have air in your brake system. I don't really know much about old brake fluid being soft. What I would do is flushing the brake fluid system and use new synthetic DOT 4 brake fluid to replace the old fluid to see if that will improve it.
Bmw e30 3.16i sahibiyim , aynı sorun bende de var rezidans değişimini nasıl yapabilirim tam olarak nerede bulunur ? 1. 2. Ve 3. Kademelerde çalışmıyor , sadece 4. Kademede çalışıyor
@@DarkDragonWing just ordered same resister as yours, and hopefully it should do the job. Abit pricey part still, let u know once installed Thanks for your videos 👍🏽
Man you are not taking TH-cam seriously. Man you've got 800k subs . You need to focus on rc cars bro . By the way big fan. No offense I'm just trying to give my opinion weather you like it or not
Yeah man, with that in mind, I'm still willing to ride the low view counts for a while just to get this E30 project moving forward. It's an investment. In the beginning, taking things off is boring for sure. Later on, it should be pretty exciting during installing cool aftermarket parts and tuning stage. I'm only working on this car in the summer, I will get back to RC soon. I might let someone else make RC videos during this time. Will see.
@@DarkDragonWing yeah sure. Good. See!! you understand me most of the TH-camrs if will get this type of comment they will just think that i am hating their content but it's not what it looks like. This kindness of yours is so good. Now you are in one of my favorite TH-camrs list. Keep up the good work. And keep in mind you've got more lovers than haters
![[LIVE] : ONE ลุมพินี 88 | คู่เอก "ป้อมเพชร vs อัสลามจอน"](http://i.ytimg.com/vi/1ZqTVVbMgbo/mqdefault.jpg)
This is an excellent video, thank you very much. It was the most helpful video I have seen on how to replace the resistor. I hope you make many more videos for us to learn from and enjoy. Best wishes.
absolutely the best video showing how to change. others fall short of completeness
Thanks for the video. This is great. I hope you return when the weather gets warm. I have a 1985 320i. It’s an awesome car. Take care
Way too easy. Thank you for this. Keep up the non bs videos for us.
Another quick and clear video, great stuff!
Great work Mackey, lots of respect to you from Ireland
great video you are a true bmw e30 bro
I hope you can make a video of how to increase the efficiency of the adaptation in the vehicle Mostbishi Lancer
احسنت انت بارع جدآ انا من متابعينك على صفحتك استمر في التقدم
I am a very good person. I am one of your followers on your page
მადლობა მეგობარო საჭირო ვიდეოა
I still miss the mirage fix and the lancer fix 💔💔
Hey Mackey, long-time fan here.
Love the videos man, always looking at your channel to see if you have uploaded. Quality over quantity!
You don’t need a blower motor, just lubricate the bearings, that’s why the resistor blew
Super many thanks
I just changed mined but it still did not work, had to change my number 20 resistor as well and now its back to normal
Nice video Mackey! Great fix. ;)
Great video! Thanks
FINNALYYY YOUR BACKKK ❤️
i have exactly the same problem you had. speeds 1 2 3 do not work, except 4 which is noisy and loud. Meanwhile, are you able to do a video on brake pedal going soft losing pressure and ABS issues. A video to replace and address this problem will be helpful.
I suspect the brake pedal maybe due to a failing master brake cylinder whose internal seal has given way. Because there's no fluid leaks at all. Fluids level stays the same. The first time i step on the pedal, it is straight soft nearly to the floor and i have top pump like 2 times in order to build the pressure. But holding the pressure on the pedal gives way to soft pedal.
I asked a friend of mine that very old dot 4 fluid can cause loss of pressure? Is this likely? the fluid has never been changed for 5 years but the car has only since been driven for 6000 km since.
Hi. You might also have air in your brake system. I don't really know much about old brake fluid being soft. What I would do is flushing the brake fluid system and use new synthetic DOT 4 brake fluid to replace the old fluid to see if that will improve it.
@@DarkDragonWing it just happened suddenly today, without prior warning. ok will do that tomorrow. and thank you for your advice.
Do you have a video of the ac compressor connection or how to connect an aftermarket compressor?
You will see some of the AC compressor connections here: th-cam.com/video/hpmj5F3oAR0/w-d-xo.html
My ac compressor has 3 wires 1 for the coil the other 2 are from the sensor of the compressor I dnt got no connections for those wires?
Nor the connection like yours from the compressor the 3 type connection
What's your email so I can send you the picture of the compressor
@@dannyws696 Message this page: facebook.com/DarkDragonWing
AH I'VE BEEN WAITING FOR SOO LONGGGGG
Great video
Bmw e30 3.16i sahibiyim , aynı sorun bende de var rezidans değişimini nasıl yapabilirim tam olarak nerede bulunur ? 1. 2. Ve 3. Kademelerde çalışmıyor , sadece 4. Kademede çalışıyor
Do you have to apply grease to the resistor before installing?
it is just nice to have
เปิดเข้าไป เพื่อเปลี่ยนอะไหล่แล้ว เสียดายน่าจะดูดฝุ่นทำความสะอาดให้เจ้าของรถสักหน่อยคงจะดูดีกว่านี้นะครับ.
Hi Macky!
mine didnt blow on level 1 either, i wonder if that the resistor problem or motor problem?
Mine blew, but the motor is also old. It should be replaced as well. Too loud.
Hello how about only fan number 1 and 4 works not rest? Is it still this resister?
Could be both resister and the blower motor
@@DarkDragonWing just ordered same resister as yours, and hopefully it should do the job. Abit pricey part still, let u know once installed Thanks for your videos 👍🏽
Thanks
Where have you been brooo ?
Been busy working on this car.
Rc modyfi soon?
Not soon yet.
Where did you get it for 30?
Part number in description. Search on ebay or Google.
Man you are not taking TH-cam seriously. Man you've got 800k subs . You need to focus on rc cars bro . By the way big fan. No offense I'm just trying to give my opinion weather you like it or not
Yeah man, with that in mind, I'm still willing to ride the low view counts for a while just to get this E30 project moving forward. It's an investment. In the beginning, taking things off is boring for sure. Later on, it should be pretty exciting during installing cool aftermarket parts and tuning stage.
I'm only working on this car in the summer, I will get back to RC soon. I might let someone else make RC videos during this time. Will see.
@@DarkDragonWing yeah sure. Good. See!! you understand me most of the TH-camrs if will get this type of comment they will just think that i am hating their content but it's not what it looks like. This kindness of yours is so good. Now you are in one of my favorite TH-camrs list. Keep up the good work. And keep in mind you've got more lovers than haters
A re-upload? What happened?
I had to remove some music.
@@DarkDragonWing That's okay. I've noticed you do the same with the other videos.
Bien ta vidéo merci, juste qu'à mon avis, tes axes du moteur de ton ventilo sont HS, ou manquent de graisse ;)
been long
U used to clean everything else when you worked on. But your don’t even care about the blower motor cover. Why?
Why bro
Music problem.
♡♡♡♡
Vvvv
First comment