I will be going live at 8 pm on the new membership perks I have you can find links on the new merchandise and membership in the video of this description happy days team whisperer
It’s really coming together!! I’m excited to see the end and watch the koi go into their new home but also a little anxious because I have LOVED watching the build so far.. it’s been the highlight of my wk waiting for Sunday videos.
Happy to see your feeling better! Your place is looking nice. Can’t wait for the day you put the koi in the new pond that’s gonna be the best video ever!
Hello James are you still going to put out a video on Sunday as I love watching you and to see how you are going on with the pond and the filters good luck keep it up your the best I use to have a 5000 liter pond but had to give it up because I had a lot off heart attacks and now I have done my back in very bad sew now I have a new 4ft bow front tropical fish tank .
Very smart filter house and those burtons drums are the dogs danglies 😁👍nice to see you got over that skimmer problem. Thank ye mother for the rubber connectors.
Make sure you use plenty of solvent weld on those pipes James, i thought i did when building my pond last year, eleven bloody leaks in the end, some had to be cut out and replaced, proper ball ache. Looking forward to seeing everything up and running.
We plumbers warm the tube with a hot air gun or paint burner then the tube becomes soft and you can easily take other shapes or make cuffs let it sit until it is cold and then take it apart and you can glue them
Looking good , James . I'd stick with the rubber boot on the skimmer . If you try to force the joint or remove material from the mating part it might leak and cause you more pain 👍 you'll be fine with the gluing - just use a good quality glue , and not the cheap stuff from Wickes . I had leaks when I used that stuff .
Its coming on nice mate, if you consider putting in a false floor, all your pipework can go under the false floor with straight runs. Keep up the great work.
Fantastic build though James.. Mine cost a small fortune but its all worth it.. Only thing I would say is try and re-jig the filter and bio chamber so it easy to get to mine can be a pain.. That's if you still can. Even if you put the drum in front of the bio chamber.. Looks a nice drum that well thought out. Where you can use rubber boots
Hey, great vid mate and it’s all looking sweet. I’ve been running the burtons tf500 for 3 months and my only advice with your setup would be to turn your drum round if you can. I know this maybe hard with your waste setup but you’ll get soaked everything you run a manual clean with the lid off. Anyway may not worry you but really annoyed me lol so I turned it round. Looks great tho 👍🏻
Lightweight non-glass roof is the way forward for conservatories. Warmer in winter, cooler in summer. Bottom drains purge... Theoretical maximum flow rate for 4" pipework under no/low pressure is 54,000 litres / hr You probably won't need to pull the pipe off to prove you're right - even with the head losses, 80,000 lph of pumps running flat out against one 4" drain line will probably overtake how much it can fill the filter in a couple of minutes.
Heat your pipe up a bit on the end till its soft and then push it in you will be able to see what part you need to file off to make it fit then only file the high spots once it goes in nice chop the end off the melted a bit
good point regarding the purge line bit (to many F/B worriers) thought is the main bit of assembly so to speak im able to give my B/D a good roding 9so to speak lol) regarding DWELL time i dnt bother
Hi James. Looks great. On the purging issue will the pumps make any difference when purging as it's a gravity fed system I thought it wouldn't make much difference as the water is gonna flow dependent of gravity
Glad to see your back alive and kicking. Regarding the pipe that's not fitting under the skimmer, if you no anybody that has a lathe they should be able to skim a mm of the pipe to make it fit, even put a very slight taper on the pipe, then could seal properly.
Good to see you back on your feet again and fit and well. The filter house is looking the hammer. Great video again and keep them coming. Not long now before the water is going in and everything running just how you like it.
Great to see you are fit and well the pond looking fantastic loving the new filter house nice and tidy ps I am thinking about being a member but you know how it is saving for a pond upgrade but I will definitely join the channel as soon as I get my new equipment keep up with the Great work
I was thinking the same myself. I had this problem the other week, I wasted far too much time, trying with vegetable oil and fairy liquid. I then resorted to heating the pipe and it worked in seconds.
@@JamesTHEKOIwhisperer123 🤣🤣 yeah mate at the end of the day it's your dream/forever pond credit card can always be payed off later the fish are looking mega still aswell looking forward to seeing them go back in 🙂
James good to see the 'HAMMER' has been refreshed, even though you are going through the mill with the piping. Mine is fairly open, but I am still struggling getting my head around this pipe to that pipe to ensure a good flow rate. Keep up the great work and good to see the Koi are doing well and you have treated Mrs Whisperer (bonus points right there!)
Awesome to see the energy back KW - can’t keep a good man down and good shout to keep Mrs. KA appy! Great looking drum and looks a nightmare running all that pipe work - noticed the water quality still gin like with koi even with heavy feeding - credit to you I doff my cap to you old boy!
This is amazing! The filter house is looking sooo good and the audio quality was absolutely fine. I look forward to seeing your videos more than anything else on TV or you tube. Glad you're feeling better and Keep up the good work. 👍🏻👍🏻👍🏻
Glade to see you fighting fit again mate. Filter house is really starting to take shape now. Shame about the skimmer but seems like you’ve got a fix for it . Fish seem to be doing Ok in their temporary home, they won’t half feel spoiled when they go into their new home👍Looking forward to the next update.👍🐟🈲😊
Your not the only one who's had a problem with the skimmer James, mine was split where the pipe was welded to the main box. Only found out when I livened up the pond. Luckily I had silicone left to seal the crack. Not good when you've spent £280 on it....
@@JamesTHEKOIwhisperer123 your not wrong buddy, it's a great skimmer, but the build quality is absolutely Shite. Quality control non existent and once fitted, no chance of a replacement either. They need to up their game big time.
Just another fantastic video mate, I think 🤔 you have the one of the best koi channels on TH-cam, your parents must be so proud of you, your dedication to the channel is outstanding and like I have said before, you have an old head on your shoulders. We all wish you success with your new merchandise and website, keep up the brilliant work buddy 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻
Loving the vids James. It's nice knowing you've done things the best you can. I'm not familiar with that drum but can you get the UVs out when you need to change them? do they have to slide out towards the skimmer?
@@JamesTHEKOIwhisperer123 Thats good news. Your install is like mine. Everything is quite tight and needs well thought out pipework. Oh I had the same issue with that brand of skimmer as well. I also ended up using a rubber boot.
Excellent job James that filter looks great, agree about nexus purge, I run a vortex as a prefilter to nexus and empty it to purge drain. Seeing Koi Dairies doing a grow and show how about asking Chris as acm about doing one with you maybe next year once your all complete
Superb vid James 💪💪👈 nice brake down on the filter setup there mate and to be honest its been well thought out to, you got it all sorted mate looks like your set up just a few tweaks and your there , its like all things you got to be doing it to learn great job man 💪💪👌👌👈
As many others have said, warm the pipe with a heat gun bud it works wonder I had to do this with some of mine. Another cracking video and glad your back on feet. You'll find I because you stopped you got ill it happens to me when I stop 😂 Almost there fella another few weeks I think and you'll be up and running and I guess by the end 'summer' the fish will be going back in be great to see them in the new home. I've never used a drum filter either so I can't make any comments on them but have seen pros and cons about them so will be interested in how yours works over the foreseeable Up the ammer boys!! Thank ya mother for rabbits and ill catch you on the next one
Good to have you back James , glad your feeling better, well worth the extra investment in time inside the filter house at this point from what I can see. Some serious kit needs some serious attention, will match the attention to detail you have already shown during this superb pond build. Crack on 🔨
Hi James, had the same problem with my skimmer ended up going to a friend with a lathe and skim some off. I'm sure Devon koi has got a lathe mate and it's worth the hassle instead of rubber. Now I'm getting cracks that i have keep sealing up..it's got to go but all said, go and see Devon koi and i believe he's not to faraway from you mate
Hello James excellent job on the pond. I am no expert but I don't want you to make the same mistake as me. I might be wrong but from memory each 4 inch pipe from the bottom drain can only supply about 12000 litres an hour. You have 3 four inch inlets to the drum including the skimmer so that's about 36000 litres an hour into the drum. So if your total of your pumps come to more than that the drum level will drop and empty. I think the drum is capable of doing 55000 litres an hour when you use more inlets. I made this mistake myself and had to turn my pumps right down so my levels where correct in my filter. Again I am no expert at all and I might be wrong.
That skimmer you can heat it up then push it in the good part about it being plastic is that you can heat it up and push your pipe in probably wont even need glue after its heated
That’s the neatest pipe work I’ve seen in a long time well done the only thing I would change is the elbows going into the drum I think tee’s would be better just in case you need to clean your pipe work
It's all looking good James. I wouldn't worry too much about people's comments on how you are keeping your fish at the moment. As long as the fish are healthy and the water is good it isnt a problem. I've had comments on my video's about my small pond being over stocked. I know it's over stocked but I'm also way over filtered. The only issue I have is when something goes wrong it goes wrong really fast so I have to stay on top of things. At the end of the day they are your fish and it's your pond. It up to you how you manage things. Cheers Jim
Feel your pain mate, I am doing my pipe work in my filter house. Carnot believe how much time it is taking me. Dry fitting and then taking it apart and clueing it. Spending hours working it all out. What ever you do do not clean it with solvent cleaner when dry fitting your pipe work. It makes it tacky and is even harder to take apart. Clean it just before you clue it mate. I tell you want when I was building my pond I wished I built a bigger filter house. You need it a least half size your pond my be bigger. It’s surprising how much room you need with pipe work pumps filters etc. Love watching your videos it spurs me on a bit When I feel like I am getting no we’re fast. Even though I spend all my spare time on it. But it will all be worth it when I have done it all. Sorry about the spelling 👍
Lovely videos. I have just subscribed. You have done an amazing job. I have just started the youtube life. Would be awesome if you could give me a shout out!
To help with the pipe not fitting cap the bottom, fill with warm water to relax the pipe. Or run warm water through it. Fit the pipe in then let out the water out and run cool water over it to harden.
Can’t wait until it’s up and running, them showers gana look the absolute hammer, happy dayz. Looks like you need to update your intro James with the new pond and logo, which looks mint 👍❤️🔥😍
James iam a new subscriber why don't you fill your pond up you can still put the fish in and just use a pressure fillter or your old system just till you get your drum up and running
I will be going live at 8 pm on the new membership perks I have you can find links on the new merchandise and membership in the video of this description happy days team whisperer
It’s really coming together!! I’m excited to see the end and watch the koi go into their new home but also a little anxious because I have LOVED watching the build so far.. it’s been the highlight of my wk waiting for Sunday videos.
I wish I never dropped onto your channel now I’m marking my garden out moving shed the lot koi pond on route 😂
Looking really good nice clean setup
Happy to see your feeling better!
Your place is looking nice.
Can’t wait for the day you put the koi in the new pond that’s gonna be the best video ever!
Yea I can’t wait that time will come soon
Hello James are you still going to put out a video on Sunday as I love watching you and to see how you are going on with the pond and the filters good luck keep it up your the best I use to have a 5000 liter pond but had to give it up because I had a lot off heart attacks and now I have done my back in very bad sew now I have a new 4ft bow front tropical fish tank .
Yea mate every Sunday
Very smart filter house and those burtons drums are the dogs danglies 😁👍nice to see you got over that skimmer problem. Thank ye mother for the rubber connectors.
Make sure you use plenty of solvent weld on those pipes James, i thought i did when building my pond last year, eleven bloody leaks in the end, some had to be cut out and replaced, proper ball ache. Looking forward to seeing everything up and running.
Yea mate definitely worrying about the glueing lol 😂
Hi James did you follow any designs for your wooden stands for the Burton Drum and Bio tanks
We plumbers warm the tube with a hot air gun or paint burner then the tube becomes soft and you can easily take other shapes or make cuffs let it sit until it is cold and then take it apart and you can glue them
I was going to suggest warming the pipe. Glad you said it.
And if you don’t have a hot air gun, witch are cheap as chips, you can use a hair dryer on high in a pinch.
Looking good , James . I'd stick with the rubber boot on the skimmer . If you try to force the joint or remove material from the mating part it might leak and cause you more pain 👍 you'll be fine with the gluing - just use a good quality glue , and not the cheap stuff from Wickes . I had leaks when I used that stuff .
Looking good James. Did you find the black sheeting links I sent you ?
Yea Mate I did but don’t think they would do the trick
Ok bud. No drama.
Its coming on nice mate, if you consider putting in a false floor, all your pipework can go under the false floor with straight runs. Keep up the great work.
Could do that tbh
Don't need a purge line I used a grinder with a sander disc to fit pipe into the skimmer..
Fantastic build though James..
Mine cost a small fortune but its all worth it..
Only thing I would say is try and re-jig the filter and bio chamber so it easy to get to mine can be a pain.. That's if you still can.
Even if you put the drum in front of the bio chamber..
Looks a nice drum that well thought out.
Where you can use rubber boots
Purge explanation makes total sense mate . Great progress yet again mate can’t wait to see it all running.
Hey, great vid mate and it’s all looking sweet. I’ve been running the burtons tf500 for 3 months and my only advice with your setup would be to turn your drum round if you can. I know this maybe hard with your waste setup but you’ll get soaked everything you run a manual clean with the lid off. Anyway may not worry you but really annoyed me lol so I turned it round. Looks great tho 👍🏻
Lightweight non-glass roof is the way forward for conservatories. Warmer in winter, cooler in summer.
Bottom drains purge... Theoretical maximum flow rate for 4" pipework under no/low pressure is 54,000 litres / hr
You probably won't need to pull the pipe off to prove you're right - even with the head losses, 80,000 lph of pumps running flat out against one 4" drain line will probably overtake how much it can fill the filter in a couple of minutes.
Yea nail on head right there
Heat your pipe up a bit on the end till its soft and then push it in you will be able to see what part you need to file off to make it fit then only file the high spots once it goes in nice chop the end off the melted a bit
Was about to say this, glad i check the comments first 😁 heating the end worked for me!
I been looking at the tf500 as well but with the 1500 bio chamber.....great bits of kit
good point regarding the purge line bit (to many F/B worriers)
thought is the main bit of assembly so to speak
im able to give my B/D a good roding 9so to speak lol)
regarding DWELL time i dnt bother
Hi James. Looks great. On the purging issue will the pumps make any difference when purging as it's a gravity fed system I thought it wouldn't make much difference as the water is gonna flow dependent of gravity
Glad to see your back alive and kicking.
Regarding the pipe that's not fitting under the skimmer, if you no anybody that has a lathe they should be able to skim a mm of the pipe to make it fit, even put a very slight taper on the pipe, then could seal properly.
Amazing job!
Glad to see you back on your feet and feeling better terrific job on fitting drum in filter house.
All taking shape in the filter house. That drum looks a quality bit of kit. But tight in the filter house. Sure you will get it sorted
Glad you are feeling better another great video thank you .
Good to see you back on your feet again and fit and well. The filter house is looking the hammer. Great video again and keep them coming. Not long now before the water is going in and everything running just how you like it.
Glad your back and feeling better crack on James it's getting there.
Great to see you are fit and well the pond looking fantastic loving the new filter house nice and tidy ps I am thinking about being a member but you know how it is saving for a pond upgrade but I will definitely join the channel as soon as I get my new equipment keep up with the Great work
You are getting there now, James mate, and it is looking very nice when you get your KOI fish in
Soon as I can but got loads of jobs I need to get done ✅
looking good james . am lovin the filter house and cant wait to see it up and running .bet you,ll be glad when fish are back in new home
Heat gun on skimmer pipes?
I was thinking the same myself. I had this problem the other week, I wasted far too much time, trying with vegetable oil and fairy liquid. I then resorted to heating the pipe and it worked in seconds.
That drum is sick bro love the spray bars on the waste shoot 👌🔥
Yea mate buzzing but Credit card is not so much lol 😂 work hard play hard
@@JamesTHEKOIwhisperer123 🤣🤣 yeah mate at the end of the day it's your dream/forever pond credit card can always be payed off later the fish are looking mega still aswell looking forward to seeing them go back in 🙂
James good to see the 'HAMMER' has been refreshed, even though you are going through the mill with the piping. Mine is fairly open, but I am still struggling getting my head around this pipe to that pipe to ensure a good flow rate.
Keep up the great work and good to see the Koi are doing well and you have treated Mrs Whisperer (bonus points right there!)
Hi James another interesting vlog mate. The filter house looks good. It's taking shape. Glad your well.
Awesome to see the energy back KW - can’t keep a good man down and good shout to keep Mrs. KA appy! Great looking drum and looks a nightmare running all that pipe work - noticed the water quality still gin like with koi even with heavy feeding - credit to you I doff my cap to you old boy!
Looking dog dandy’s in yr filterhouse
This is amazing! The filter house is looking sooo good and the audio quality was absolutely fine.
I look forward to seeing your videos more than anything else on TV or you tube.
Glad you're feeling better and Keep up the good work. 👍🏻👍🏻👍🏻
Thanks mate appreciate that
Missed you mate..hope you ha a lovely break..BTW love the NEW LOGO
Thanks mate it’s looking the hammer
Wont be long now james and all the hard work will be worth it. Well done to whisper family. Great video 👏👏
Glade to see you fighting fit again mate. Filter house is really starting to take shape now. Shame about the skimmer but seems like you’ve got a fix for it . Fish seem to be doing Ok in their temporary home, they won’t half feel spoiled when they go into their new home👍Looking forward to the next update.👍🐟🈲😊
Great video fish looking healthy can’t wait to see them in there new home 👍
Yea mate me as well you will get to see them live in a bit as well mate as you are a member thanks mate
Hell yeah Chris 👍👍👍
@@creativecrambo 👍👍👍
Your not the only one who's had a problem with the skimmer James, mine was split where the pipe was welded to the main box. Only found out when I livened up the pond. Luckily I had silicone left to seal the crack. Not good when you've spent £280 on it....
It’s a right pain init
@@JamesTHEKOIwhisperer123 your not wrong buddy, it's a great skimmer, but the build quality is absolutely Shite. Quality control non existent and once fitted, no chance of a replacement either. They need to up their game big time.
Just another fantastic video mate, I think 🤔 you have the one of the best koi channels on TH-cam, your parents must be so proud of you, your dedication to the channel is outstanding and like I have said before, you have an old head on your shoulders. We all wish you success with your new merchandise and website, keep up the brilliant work buddy 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻
Wow, thanks mate
Problems? No problems - just solutions. Looking good in the filter house mate.
Yer getting there mate 👍 looking forward to the next instalment already 😂👍
Nice to see you back mate and its getting there will bell you some point this week crack on Happy ponding
Everything sounds good and looks good obuddy. Keep it up. I’ve also been sick this week lol
Great video as usual but I would contact pond expert and get that pump replaced before you do anything else as you keep saying get it done right
Loving this build, can’t wait for the fill 👍
Well done it’s looking the bees knees 👍
Lovely job on the pond and filters looking good James
Well Done James. Doing a Lovely job. You must be proud of yourself.
Loving the vids James. It's nice knowing you've done things the best you can. I'm not familiar with that drum but can you get the UVs out when you need to change them? do they have to slide out towards the skimmer?
Yea I can get them out within the mm deffo right but it does fit
@@JamesTHEKOIwhisperer123 Thats good news. Your install is like mine. Everything is quite tight and needs well thought out pipework. Oh I had the same issue with that brand of skimmer as well. I also ended up using a rubber boot.
Well done James loving the new merch you put so much time n effort in everything u do spot on 👍
Looking great. Are you planning on installing a protein skimmer?
Good to have you back ,4K for blinds ,jokers ,had a new roof put on for 5k !!good luck
Yea mate that’s what I was thinking 🤔
Deffo heat the pipe maybe start with boiling water 👍
Excellent job James that filter looks great, agree about nexus purge, I run a vortex as a prefilter to nexus and empty it to purge drain. Seeing Koi Dairies doing a grow and show how about asking Chris as acm about doing one with you maybe next year once your all complete
Everything looks the business mate can't wait to see it running and the fish back in the pond
I had the same problem with the skimmer , took me a while to sort it , I had to buy a clay to plastic rubber adaptor ,
Looking proper pimp there mate 👍👍
thanks mate
@@JamesTHEKOIwhisperer123 that filter rooms a bit of a squeeze 😱 good job you is slim 😂
@@JamesTHEKOIwhisperer123 build is looking awesome though mate 👍👍👍
Iv been looking forward to this vid
Glad your back on your feet filter house is comimg along nicely 👌
Very impressive you are doing a great job, very well done
Superb vid James 💪💪👈 nice brake down on the filter setup there mate and to be honest its been well thought out to, you got it all sorted mate looks like your set up just a few tweaks and your there , its like all things you got to be doing it to learn great job man
💪💪👌👌👈
Nice one mate yea very happy how things are going mate see you live in a bit mate
@@JamesTHEKOIwhisperer123 💯👌👌👈
Good to know ur back in the saddle james....ur nearly there
Love the new logo I want a mat 😆 looks awesome. Can't wait to see the fish in their new home it's gonna look mint mate.
As many others have said, warm the pipe with a heat gun bud it works wonder I had to do this with some of mine.
Another cracking video and glad your back on feet. You'll find I because you stopped you got ill it happens to me when I stop 😂
Almost there fella another few weeks I think and you'll be up and running and I guess by the end 'summer' the fish will be going back in be great to see them in the new home.
I've never used a drum filter either so I can't make any comments on them but have seen pros and cons about them so will be interested in how yours works over the foreseeable
Up the ammer boys!!
Thank ya mother for rabbits and ill catch you on the next one
The very fact you are learning on the job and producing workmanship like that is amazing mate.
Thanks it’s definitely a head banger at time lol 😂
Out of interest James what are the filter house floor dimensions?
Just under 8ft x8ft
@@JamesTHEKOIwhisperer123 thanks pal
Good to have you back James , glad your feeling better, well worth the extra investment in time inside the filter house at this point from what I can see. Some serious kit needs some serious attention, will match the attention to detail you have already shown during this superb pond build. Crack on 🔨
Hi James, had the same problem with my skimmer ended up going to a friend with a lathe and skim some off.
I'm sure Devon koi has got a lathe mate and it's worth the hassle instead of rubber.
Now I'm getting cracks that i have keep sealing up..it's got to go but all said, go and see Devon koi and i believe he's not to faraway from you mate
Looking good J , Can I ask ,How much was that drum filter?
Cheers
£2895 I think 🤔 but will confirm that as I paid as a boat price with the pumps and bio
Cheers
Cracking job lad!!!! Heat the end of the pipe a bit to alter the shape one end of the pipe but yea top job smashing it !!
Hi James, How is your credit card account?.
Maxed out lol 😂
Hello James excellent job on the pond. I am no expert but I don't want you to make the same mistake as me. I might be wrong but from memory each 4 inch pipe from the bottom drain can only supply about 12000 litres an hour. You have 3 four inch inlets to the drum including the skimmer so that's about 36000 litres an hour into the drum. So if your total of your pumps come to more than that the drum level will drop and empty. I think the drum is capable of doing 55000 litres an hour when you use more inlets. I made this mistake myself and had to turn my pumps right down so my levels where correct in my filter. Again I am no expert at all and I might be wrong.
Brilliant James well worth the wait …👍🏻
That skimmer you can heat it up then push it in the good part about it being plastic is that you can heat it up and push your pipe in probably wont even need glue after its heated
You think that will work ?
@@JamesTHEKOIwhisperer123 I done this on mine. Although I did use some gold label to be extra sure it wouldn’t leak.
That’s the neatest pipe work I’ve seen in a long time well done the only thing I would change is the elbows going into the drum I think tee’s would be better just in case you need to clean your pipe work
Could be a option nothing glued yet untill I am happy I think it’s best not to glue untill everything is good to go
It's all looking good James. I wouldn't worry too much about people's comments on how you are keeping your fish at the moment. As long as the fish are healthy and the water is good it isnt a problem. I've had comments on my video's about my small pond being over stocked. I know it's over stocked but I'm also way over filtered. The only issue I have is when something goes wrong it goes wrong really fast so I have to stay on top of things. At the end of the day they are your fish and it's your pond. It up to you how you manage things. Cheers Jim
Nice update James filters will be a dream
Feel your pain mate, I am doing my pipe work in my filter house. Carnot believe how much time it is taking me. Dry fitting and then taking it apart and clueing it. Spending hours working it all out. What ever you do do not clean it with solvent cleaner when dry fitting your pipe work. It makes it tacky and is even harder to take apart. Clean it just before you clue it mate. I tell you want when I was building my pond I wished I built a bigger filter house. You need it a least half size your pond my be bigger. It’s surprising how much room you need with pipe work pumps filters etc. Love watching your videos it spurs me on a bit When I feel like I am getting no we’re fast. Even though I spend all my spare time on it. But it will all be worth it when I have done it all. Sorry about the spelling 👍
Looking the nuts mate not long now 👏👏👏
Lovely videos. I have just subscribed. You have done an amazing job. I have just started the youtube life. Would be awesome if you could give me a shout out!
To help with the pipe not fitting cap the bottom, fill with warm water to relax the pipe. Or run warm water through it. Fit the pipe in then let out the water out and run cool water over it to harden.
Can’t wait until it’s up and running, them showers gana look the absolute hammer, happy dayz. Looks like you need to update your intro James with the new pond and logo, which looks mint 👍❤️🔥😍
Them showers are gonna be noisy 😅
@@bobbyknox9258 yes they are 🤣but the mountain tree matting should make it less noisy 🤞🏻
@@just4koi143 the things we do for these jewels A 🙄
@@bobbyknox9258 we spoil them to much 🤣
Looking good mate its getting there 👍
Make sure you have got room to get your uv bulbs out , looks like could be a bit tight . Looking good
😗👍
Good to see you on your feet again bud 👍
Hi James glad your back to your self. How do you manage to sleep at night 😳
Stick in pal it will all come together soon enough 👍👍👍
Brother i was waiting for your update 🥰👍🏻👍🏻
Glad you and family OK.
No need to apologise. All good 👍
Your doing really well.
UP. THE. AMMER.
Nice one on treating the Mrs.
Looking the absolute hammer 🔨 James
Looking good James 👍👍
James iam a new subscriber why don't you fill your pond up you can still put the fish in and just use a pressure fillter or your old system just till you get your drum up and running
Who else was lost last week without a video
Me lol 😂
Yeah buddy I need one of them koi’s you make