Honestly, thank you so much from the bottom of my heart to infinity. I was literally about to cry because i couldn't print from my new computer and thanks to your video i fixed it. Thank you, thank you , thank you
thank you very much. I had e3 and I was literally ready to go to the service, where they would take a lot of money from me(the fix took me only 15 sec, lol)
Thank you, my brand new printer started paper jamming and when it would work it printed blurry and double. Cleaned it out and also cleaned the clear tape inside with alcohol as it looked smudged. Then hit reset button for 10 sec and all seems good. Funny thing the Cannon website said nothing about reset.
I just bought a PIXMA TS3522 because I heard it printed the best photo quality. and it was super cheap. I should've known there was a catch. So I go through the whole rigamarole of how other people REALLY want to get info on every single picture I ever print, and set up the printer just fine. Then I actually try to print...and get the 4103 error code. Took me at least half an hour to even figure out why and when I did I couldn't believe it. Who makes a printer that refuses to print letter sized glossy photo paper??? Canon does apparently. Only way to get around this is to change to plain paper, which causes the color to be faded and washed out looking. This is what is meant by "change the settings". There is no way I've found to get around this at all.
My Canon G2000 Printer gives a 2 blinking light problem. I have tried resetting the printer but I cannot go beyond that as the printer's carriage just bangs very hard left and right and stops. Then the blinking light comes on again. I have cleaned everything that needs cleaning up, I have also changed the ink absorber but the problem still persists. What else can I do besides dumping the printer as trash?
Same here 😭 I can’t seem to find a way to fix it. I’ve tried disconnecting it for 10 seconds and plugging it back in but it didn’t work. I moved to a different power source but it’s still the same.
hello ,thanks for this lovely informative video . much appreciated. i have error support code 7800 ( see manual ).needs a repair or replacement . switch off & unplug the power cord . so frustrated. ink cartridges BLACK & COLORED 246 XL are new .CANON SAYS ITS OUT OF WARRANTY SINCE ITS 1YR 2 MONTHS OLD . THEIR AUTHORISED REPAIR SHOP SAYS CONTACT CANON AS ITS A EXCHANGE MODEL SO ITS PARTS ARE NOT AVAILABLE . KINDLY HELP .
It often means that there is a print head communication problem. Try to change the cartridges, clean the contacts inside the printer, turn off and on the printer but if nothing works the printer will require service.
@@viandant5 ours has the same issue even after service. they couldnt find the error during testing so they just sent it back but they did print test pages with it and it worked weirdly enough. maybe it is the cheaper off brand cartridges we are using that causes the problem
Great video and obviously your inundated with questions lol. I have a pro 1000 with a door open error. I'm wondering if it can be opened up to see if the little switch is maybe not working? I don't know what the sensor actually is on these things though
@@viandant5 OG means the motherboard would need replacement? Yeah, well that sort of nixes moving on in that department. It's a shame I haven't found anyone that's had that issue strangely enough
@@viandant5 Thanks for the info. Is the sensor something replaceable like an electronic sensor or something? Or is it just a latch of some kind that might be sticky or something and needs to be checked?
Hiya, I have a pixma 4551 and an 7800 error - see the thing is I do not want to print anything - i just need to scan directly to my computer but now the whole thing is locked into the error - i was not able to reset it as instructed so I dont know what to do. Do you have any idea how to help?
Hello! My TR4522 Pixma isn’t turning on. There is no power light indicator. I even bought a new cord and it still doesn’t work. I even tried multiple outlets. The light doesn’t turn on and neither does the printer. Help please.
I was in the middle of setting up my new Pixma Pro-200 ink tanks when Support Code 520E popped up: "Turn the printer off and then on again". Already turned it off / unplugged several times but it keeps popping up when I turn it back on :( is it just a defective printer?
Canon says it'a fatal error, probably you have to repair tha machine. Check if you removed all packaging materials, remove and reinstall the ink cartridges
My Cannon MG2540S printer has been workin,fine untill a few days ago ,its prints mails fine with no problem but wit documents it says "printer not responding" whre can I still check .?
I have a new Pixma 3522. The black cartridge 275 ran low and I replaced it with a 275xl and got an error message it is the wrong cartridge. What us happening? Norma Gessell
I have support code 9500. paper sensor is fine. Any other things to check? When i reset the printer by pressing the red button 5 times with holding power button it turns on. Can print the nozzle check pattern. But not working wifi and usb connection. Copy function is not working too. After i turn on again normally it shows the error. Can you please help me with this
Hello, thank you for this video. Is there anymore help for understanding error code E 5..? I just replaced the colour cartridge correctly, and checked it. Then cleaned points and reinstalled it. I have unplugged the printer too. Everything is looking fine. Paper feed is clear. What else can I do? I have a Cannon TS3465 model.
@@viandant5 Thank you for your quick update. I’ve just replaced the printer. And credit to Canon and Officeworks, as they were great in changing it over, all under warranty. ☺️
Hi there, are you able to assist with a support code 7100 on a Canon maxify MB5440. I have restarted and unplugged it several times but it is not changing or letting me do anything. Please help!
@@tyronvitangcol3557 In the cover there is a tab, if I remember well. Check if the sensor in the printer where the tab in inserted is in the right position. Or check if the tab is broken
I have a pro 1000 with the same issue. It says the doors open when it's not. Is there a way of jamming paper on the right to make it think that it's not open. Or open it up and try and find that switch or whatever to see if it's stuck in some way?
Ciao Viandant5, innanzi tutto complimenti e grazie per i tuoi tutorial molto esaustivi. Poi avrei un problema con un codice Errore 7700 su una stampante Canon Pixma TS705 che mi indica di portarla in assistenza. Ma, per il costo della stampante nuova non ci sarebbe convenienza, dato che mi chiederebbero una cifra vicino al costo del nuovo. C'è un modo per risolvere questo problema? Qual è il motivo per qui appare questo codice errore? Grazie
@@viandant5 The error code occurs after I changed the ink it says don’t match but I used canon ink. It prints fine before theres a message popped up that low ink that’s why I changed it.
whats error code 5040 for tr 4500 for? my printer is new and im trying to set it up but this came n immediatly and when i turn my printer on it sounds like a paper jam is happening! doesnt sound good.but thats not the issue since i just opened the printer from the box! Help please
I have canon mg5750 error code E6000. I have cleaned rollers. Turned off and do reset. Hard reset. Left off. Tried to do test sheet. Still won’t print yet printer this morning. Frustrating. Please HELP
Grazie infinite per tutto quello che condivide sul suo canele, lei è un grande riparatore e Maestro delle stampanti ed è il mio unico punto di riferimento da anni ormai. Se possibile vorrei chiederle una cosa Maestro, in merito un codice di errore non menzionato ovvero il 6004, quest'ultimo presente su una Canon PIXMA TS5050, apparso dal nulla dopo aver completato una stampa. C'è la possibilità di poter capire a cosa si riferisce questo codice di errore? L'unica cosa che appare sul display è di annullare la stampa, spegnere e riaccendere, logicamente operazione effettuata, ma senza alcun risultato. Grazie anticipatamente.
Grazie per i complimenti! Dal manuale Canon risulta sia dovuto a un oggetto estraneo come un pezzetto di carta all'interno della stampante, oppure un sensore passaggio carta difettoso
I had the same 7800 error and what I did is I switched out the black and color cartridges. I had the original ones that came with the printer so I used those instead of the newer ones and the error went away. Hope this helps.
Hi I have a 3140 printer. I can't seem to print from my Mac. I have no problems with my android phone, but I get the E59 message each time I try to print from my MacBook . its frustrating. any ideas what I can do?
It often means that there is a print head communication problem. Try to change the cartridges, clean the contacts inside the printer, turn off and on the printer but if nothing works the printer will require service.
@@rimvydasurbutis8675 It could be a paper sensor defective or out of position.Try these methods th-cam.com/video/WSfqYiBWl30/w-d-xo.html But probably the printer must be repaired
Il mio problema è che la mia stampante (canon mx495) si accende, appare con la scritta canon in alto, fa dei rumori strani e poi si chiude da sola per poi riaccendersi qualche secondo dopo per rifare la stessa cosa. Non mi fa neanche schiacciare altri tasti. Sapresti dirmi quale sia il problema? Grazie
Purtroppo senza vederla è difficile da dire. Potrebbe essere anche solo la cartuccia fuori posizione o un oggetto che blocca il movimento del carrello testine ma potrebbe anche essere un problema meccanico interno
I have a strange problem, the printer works if I put a page for it to scan and the scanner sends documents to my pc after scanning but it won't send documents from my pc to printer to print? Any ideas what's wrong?
try to update or reinstall the printer driver. Are you sure that printer is the selected printer in the printer folder, with the right page format? Are all the cartridges working?
@@viandant5 It didn't give an error number just stated connection problem. But I stated above what it was. It made duplicate addresses for some reason so I just needed to set it to "copy 2" to match it up. Took hours of fiddling about but it works now thanks.
It often means that there is a print head communication problem. Try to change the cartridges, clean the contacts inside the printer, turn off and on the printer but if nothing works the printer will require service. It could be caused by the ink cartridges too
Check if the print head moves freely, check for jammed paper or something else, check if the cartridges are correctly installed, try to remove and reinsall all the cartridges.
Please tulungan mo ako mag; check ink 1686 Blk ang printer ko canon pixma tr4670s,.na refill ko na po ang ink. ano ang gagawin ko dito?first time ko pa mag refill.
Thank you very much for your helpful videos. I have pixma ix6820. I t gave me error code 5B00. I tried to fix it but I was unable to go to service mood. Now it looks like it is locked. Any way to fix it. Thanks
@@viandant5 not yet sir, its been working great actually its just started when i scan a document, then when i started to use it again to print then that mismatch shows, thnaks
Check if the cartridges carriage is moving freely, check if there are pieces of paper or something similar inside the printer. Remove any impediment. Make sure the ink cartridges are correctly installed. Press the ink cartridges until they click into place
@@viandant5 Yeah, Canon doesn't bother telling anyone that certain models will never ever print letter sized glossy photo paper, but for some reason if you change to plain paper it decides it wants to print after all, but the color is washed out forcing you to edit any photo you want this thing to print to be super dark just to look normal.
It could be related to the scan motor scan motor moving too fast. Check whether the optical switch is well connect, check the flat cable. Probably the printer will require to be disassembled
The only thing you can do is turn the printer on and off several times. If it doed not work it could be the main board, the flat cable between main board and the control board, or a sensor
@@crinamariana7875 Really I received tens of comments asking how to solve this problem. It seems there is a Canon update of the driver that causes the problem
The paper tray is not in the correct position, or the paper size is not correct - load the correct paper, or the paper is not correctly loaded, or the sensor of the paper cassette is defective
Try to connect the printer with a UBC cable to see if the WiFi signal is the problem. Find a new place for the printer. turn off and on again the router.
Honestly, thank you so much from the bottom of my heart to infinity. I was literally about to cry because i couldn't print from my new computer and thanks to your video i fixed it. Thank you, thank you , thank you
Again thank you, you avoid a break down and a printer fly from the window. THANK YOU!!!
srsly you deserve some kind of an award from canon!!! this video helped me A LOT. if there's any problem i will always comback thank you so much!!!
Happy to help you!
Stupid error 59!!!!! Dealt with this crap for too long, was about to toss my printer out the window. Thank you so much!!
Thank you very much. My printer is working😄
Do have any ideas anout code 7500 on Canon TR4720 Pixma printer,?
thank you very much. I had e3 and I was literally ready to go to the service, where they would take a lot of money from me(the fix took me only 15 sec, lol)
Thank you, my brand new printer started paper jamming and when it would work it printed blurry and double. Cleaned it out and also cleaned the clear tape inside with alcohol as it looked smudged. Then hit reset button for 10 sec and all seems good. Funny thing the Cannon website said nothing about reset.
I just bought a PIXMA TS3522 because I heard it printed the best photo quality. and it was super cheap. I should've known there was a catch. So I go through the whole rigamarole of how other people REALLY want to get info on every single picture I ever print, and set up the printer just fine. Then I actually try to print...and get the 4103 error code. Took me at least half an hour to even figure out why and when I did I couldn't believe it. Who makes a printer that refuses to print letter sized glossy photo paper??? Canon does apparently. Only way to get around this is to change to plain paper, which causes the color to be faded and washed out looking. This is what is meant by "change the settings". There is no way I've found to get around this at all.
My Canon G2000 Printer gives a 2 blinking light problem. I have tried resetting the printer but I cannot go beyond that as the printer's carriage just bangs very hard left and right and stops. Then the blinking light comes on again. I have cleaned everything that needs cleaning up, I have also changed the ink absorber but the problem still persists. What else can I do besides dumping the printer as trash?
It'as a fatal error, probably a mechanical problem. You could check ir the cartridges are correctly installed
Thank you very much, I need to set the paper size to A4. Thanks again
Without this vid my dad would have killed me thanks
My printer just keeps restarting when plugged in. Any idea how I fix that? Thanks
Same here 😭 I can’t seem to find a way to fix it. I’ve tried disconnecting it for 10 seconds and plugging it back in but it didn’t work. I moved to a different power source but it’s still the same.
Same issue here 😭
I just had the same issue last night too 🤦🏽♀️
It could be a bad contact in the power supply board, or in the control panel, or the electrical cable or electrical plug
Thanqqqq soooo much.. helped alot..
thank you for this video. so helpful
You help me for second time. Thanks
Error 6941 resolved. Thanks
I have a MG6821. I'm seeing a 6502 error message. Any specific help for this? Thank you.
It's a ink cartridge error, o the contacts beteween cartridge and printer are dirty or defective
hello ,thanks for this lovely informative video . much appreciated. i have error support code 7800 ( see manual ).needs a repair or replacement . switch off & unplug the power cord .
so frustrated. ink cartridges BLACK & COLORED 246 XL are new .CANON SAYS ITS OUT OF WARRANTY SINCE ITS 1YR 2 MONTHS OLD . THEIR AUTHORISED REPAIR SHOP SAYS CONTACT CANON AS ITS A EXCHANGE MODEL SO ITS PARTS ARE NOT AVAILABLE . KINDLY HELP .
It often means that there is a print head communication problem. Try to change the cartridges, clean the contacts inside the printer, turn off and on the printer but if nothing works the printer will require service.
@@viandant5 ours has the same issue even after service. they couldnt find the error during testing so they just sent it back but they did print test pages with it and it worked weirdly enough. maybe it is the cheaper off brand cartridges we are using that causes the problem
I experienced this 7800 code with my Pixma TR4550. Solution: put the printer into the rubbish bin and then bought a HP.
Great video and obviously your inundated with questions lol. I have a pro 1000 with a door open error. I'm wondering if it can be opened up to see if the little switch is maybe not working? I don't know what the sensor actually is on these things though
It could be the sensor or also the connector with the main board, or the main board
@@viandant5 OG means the motherboard would need replacement? Yeah, well that sort of nixes moving on in that department. It's a shame I haven't found anyone that's had that issue strangely enough
@@viandant5 Thanks a lot for the info though
@@stephen-wahl it's more likely a sensor problem, or the flag doesn't press well on the sensor
@@viandant5 Thanks for the info. Is the sensor something replaceable like an electronic sensor or something? Or is it just a latch of some kind that might be sticky or something and needs to be checked?
Do you have anything for a support code of 7800?
I'm sorry I've no suggestions. The manual only says general error
Hiya, I have a pixma 4551 and an 7800 error - see the thing is I do not want to print anything - i just need to scan directly to my computer but now the whole thing is locked into the error - i was not able to reset it as instructed so I dont know what to do. Do you have any idea how to help?
It's an error often related to the ink cartridges. Changing the cartridge may solve the problem
Hello! My TR4522 Pixma isn’t turning on. There is no power light indicator. I even bought a new cord and it still doesn’t work. I even tried multiple outlets. The light doesn’t turn on and neither does the printer. Help please.
Probably you have a problem with the power board. Try this th-cam.com/video/EbYjGdJhdbQ/w-d-xo.html
What does the yellow triangular button on the right side pf the 7120 printer mean when it's lit up?
It's a general error. Are there error codes in the printer display or other indications in the printer folder?
How to fix g3411 showing droplet pic on led and qobt print or dollow any instruction.What do I do?
what do you mean? it does not print?
I was in the middle of setting up my new Pixma Pro-200 ink tanks when Support Code 520E popped up: "Turn the printer off and then on again". Already turned it off / unplugged several times but it keeps popping up when I turn it back on :( is it just a defective printer?
Canon says it'a fatal error, probably you have to repair tha machine. Check if you removed all packaging materials, remove and reinstall the ink cartridges
My Cannon MG2540S printer has been workin,fine untill a few days ago ,its prints mails fine with no problem but wit documents it says "printer not responding" whre can I still check .?
Only a type of document or all documents? Try to reinstall the driver, check if the correct printer is selected
Hi i just wanna ask why does my pixma 4540 has its white streaks in every prints result?
vertical white streaks, horizontal white streaks or where?
I have a new Pixma 3522. The black cartridge 275 ran low and I replaced it with a 275xl and got an error message it is the wrong cartridge. What us happening? Norma Gessell
may be the cartridge is defective. 275XL is compatible with your printer
@@viandant5 Thanks
Makes sense I guess
I have support code 9500. paper sensor is fine. Any other things to check? When i reset the printer by pressing the red button 5 times with holding power button it turns on. Can print the nozzle check pattern. But not working wifi and usb connection. Copy function is not working too. After i turn on again normally it shows the error. Can you please help me with this
I don't know which is your printer but I think you should check the cartridges, for start.
@@viandant5 my printer is a tr4550 and i tried different cartridges.
@@yowunpansilu it could the a paper jam, a paper sensor, the connector of the paper sensor, the main board
Thank you so much
Hello, thank you for this video. Is there anymore help for understanding error code E 5..? I just replaced the colour cartridge correctly, and checked it. Then cleaned points and reinstalled it. I have unplugged the printer too. Everything is looking fine. Paper feed is clear. What else can I do? I have a Cannon TS3465 model.
E05 means a problem with the ink cartridge, probably that cartridge is defective or not compatible with that printer.
@@viandant5 Thank you for your quick update. I’ve just replaced the printer. And credit to Canon and Officeworks, as they were great in changing it over, all under warranty. ☺️
very helpful thanks
Maybe a HP would be great option!
@Larry kaiser
My solution was Epson
Is there a solution for E32 error in canon ts3140 series printer?
Hi there, are you able to assist with a support code 7100 on a Canon maxify MB5440. I have restarted and unplugged it several times but it is not changing or letting me do anything. Please help!
It could be a paper jam or something blocking the carriage of the ink cartridges
Hi! I just wanted to ask if you have a possible solution to "Cover is open" error? It's been popping up even if the cover is closed.
Which printer? probably the switch sensor of the cover is broken
@@viandant5 I have a Canon MX497
@@tyronvitangcol3557 In the cover there is a tab, if I remember well. Check if the sensor in the printer where the tab in inserted is in the right position. Or check if the tab is broken
I have a pro 1000 with the same issue. It says the doors open when it's not. Is there a way of jamming paper on the right to make it think that it's not open. Or open it up and try and find that switch or whatever to see if it's stuck in some way?
Ciao Viandant5,
innanzi tutto complimenti e grazie per i tuoi tutorial molto esaustivi.
Poi avrei un problema con un codice Errore 7700 su una stampante Canon Pixma TS705 che mi indica di portarla in assistenza.
Ma, per il costo della stampante nuova non ci sarebbe convenienza, dato che mi chiederebbero una cifra vicino al costo del nuovo.
C'è un modo per risolvere questo problema?
Qual è il motivo per qui appare questo codice errore?
Grazie
Di solito è relativo alla testina o ai suoi contatti
لوسمحت عبثت في الاعدادات دون علم واصبحت طريقة الاستنساخ بطيئة جدا اريد ان ارجعها ال وضعها السريع كيف
i keep getting support code 6004 canon pixma ts6320 but i dont see anything on the inside that would cause a jam
It could be a broken or defective paper sensor
@@viandant5 is it replaceable or would I need to buy another printer?
@@shawnisiadavis6901 Yes but you should bring the printer to a repair centre
I stay in South Carolina so I guess I should Google and find a repair shop thank you so much for your help
Do have any ideas for error 1660 on canon mx922?
It could be due to improper installation or defective ink cartridges. Clean and reinstall the ink cartridges, try to change them.
@@viandant5 The error code occurs after I changed the ink it says don’t match but I used canon ink. It prints fine before theres a message popped up that low ink that’s why I changed it.
@@zhanealdous4251 Are you sure they are properly installed? try to remove and reinstall them. Clean the contacts between the printer and the cartridge
I did but still don’t work. Anyways thanks for your time. I guess time to get a new one 😌
I have a Canon pixama printer ts3522, it has an error E34 could you please help me?
Thank you!
It's related to the wireless connection
@@viandant5 Thank you so much. I will check in to that.
Do I just need to unplug the printer and the modem too the Internet?
@@evahowe8078 Yes it's the first thing to try
@@viandant5 Ok, thank you very much!
error code 1430 for a canon pixma tr4520 do you know how to fix???
Probablu an ink cartridge non correctly installed, not recognized or defective
whats error code 5040 for tr 4500 for? my printer is new and im trying to set it up but this came n immediatly and when i turn my printer on it sounds like a paper jam is happening! doesnt sound good.but thats not the issue since i just opened the printer from the box! Help please
The manual only says it's a fatal error, I can't help you. It could be due to main board or other internal broken parts
I have canon mg5750 error code E6000. I have cleaned rollers. Turned off and do reset. Hard reset. Left off. Tried to do test sheet. Still won’t print yet printer this morning. Frustrating. Please HELP
It could be a paper jam, or a paper sensor defective or broken
I have the same printer what you have and my paper keeps getting jammed on the 3rd with an error code 1303
error code 1303 means jammed paper, or a defective paper sensor
Brand new pixma TS6420 with error code 1871, also says cassette is not in but it is, can you help?
Check if the cassette is fully inserted, chec if the paper size loaded is correct. There could be a broken sensor
@@viandant5 thanks for the reply, the paper is correct and its all inserted correctly, this error just started all of a sudden.
@@michigan49080 here could be the sensor of the paper tray defective or out of position, or its connector detached
I wish how easy B203 being resolved like in your video, but too bad it's not relevant at all
If the printer is broken, no one method will work
Can you tell me how to change ink pad of Epson l1800 printer ?
Sorry I've no instructions for this printer
@@viandant5 ok sar
Cannon 5100 scanner is crimping paper as it feeds thru the bottom to eject the paper code 2803
that error code is related to paper jamment in the auto document feeder. Check if there are any foreign objects stuck somewhere
How about canon TR4570S support code 9500?
Grazie infinite per tutto quello che condivide sul suo canele, lei è un grande riparatore e Maestro delle stampanti ed è il mio unico punto di riferimento da anni ormai.
Se possibile vorrei chiederle una cosa Maestro, in merito un codice di errore non menzionato ovvero il 6004, quest'ultimo presente su una Canon PIXMA TS5050, apparso dal nulla dopo aver completato una stampa.
C'è la possibilità di poter capire a cosa si riferisce questo codice di errore?
L'unica cosa che appare sul display è di annullare la stampa, spegnere e riaccendere, logicamente operazione effettuata, ma senza alcun risultato.
Grazie anticipatamente.
Grazie per i complimenti! Dal manuale Canon risulta sia dovuto a un oggetto estraneo come un pezzetto di carta all'interno della stampante, oppure un sensore passaggio carta difettoso
Good video, but I miss suport for erro code 7800, Pixma TR4550. Thanks
This is the support code. Is there an error code too?
That's what I was looking for to. Did you ever get your problem resolved?
This is what I need too
I had the same 7800 error and what I did is I switched out the black and color cartridges. I had the original ones that came with the printer so I used those instead of the newer ones and the error went away. Hope this helps.
I have a Cannon Pixma G3100 and the triangle and the drop light on and it is on pause how do I fix it
The drop light I think is the ink. You have to change one of the ink cartridge
Whats with Code 7700? Same Printer as in Video
it's often related to the print-head or the ink cartridge
Hi I have a 3140 printer. I can't seem to print from my Mac. I have no problems with my android phone, but I get the E59 message each time I try to print from my MacBook . its frustrating. any ideas what I can do?
Check the paper settings into the PC printer folder, it could be the problem
@@viandant5 hey thanks. I sorted it by deselecting the error indicator on the printer settings on the MacBook. now it prints like a breeze. Thanks
How do u resolve error 5206. Tried resetting but failed. Is there another way. Canon maxify mb2740
I only know the methods described in this video
any help with error 2103? i have a mg3522
It's related to the paper size. Check the settings of the printer
My printer support code is 6004. Please can you guide me on how to solve the problem
probably it is a paper jam or a defecive sensor along the paper path
Is there any solution for E32 error in canon TS3140 series
10:52
Please help! I get this message- IP address filtering disabled- my printer won’t print with wifi- is this the issue? Help!
In Administrator Mode, select Network - TCP/IP Setting - IP Address Filtering, Permit Access
I fixed the paper issue but it still only allows me to print in plain paper setting. I print on glossy paper.. error code 4103 on canon TS3322
Check the paper size setting, it's often an error related to the paper settings
on ts3150 I cleaned the cartridges but the error code E05 remains. what can I do?
Probably the ink cartridge is defective, cleaning it cannot solve the problem. I think you have to change the cartridge
I have canon E 4570 printer which have problem of support code 5050 . Please give solution
in this video you'll find causes and solutions for that error code
I have seen but problem is not resolve
@@sudhirmajlekar9172 probably there is a broken paper sensor and your printer require service
What about support code 7800 for tr4522
It often means that there is a print head communication problem. Try to change the cartridges, clean the contacts inside the printer, turn off and on the printer but if nothing works the printer will require service.
Hi, can you help me with an error 5207? I checked all the basic maintenance
It could be caused by a paper jam
@@viandant5 thank you for your answer. But it wasn’t this problem. Maybe you have any other suggestions?
@@rimvydasurbutis8675 It could be a paper sensor defective or out of position.Try these methods th-cam.com/video/WSfqYiBWl30/w-d-xo.html
But probably the printer must be repaired
@@viandant5 Thank you very much for your answer!!
Il mio problema è che la mia stampante (canon mx495) si accende, appare con la scritta canon in alto, fa dei rumori strani e poi si chiude da sola per poi riaccendersi qualche secondo dopo per rifare la stessa cosa. Non mi fa neanche schiacciare altri tasti.
Sapresti dirmi quale sia il problema? Grazie
Purtroppo senza vederla è difficile da dire. Potrebbe essere anche solo la cartuccia fuori posizione o un oggetto che blocca il movimento del carrello testine ma potrebbe anche essere un problema meccanico interno
I have a strange problem, the printer works if I put a page for it to scan and the scanner sends documents to my pc after scanning but it won't send documents from my pc to printer to print? Any ideas what's wrong?
try to update or reinstall the printer driver. Are you sure that printer is the selected printer in the printer folder, with the right page format? Are all the cartridges working?
@@viandant5 I think it was the selected printer even though it's the only one it seems to have made "copy" addresses.
@@solonsolon9496 It could be a cartridge problem, may be one of them is empty. Don't you have any error messages?
@@viandant5 It didn't give an error number just stated connection problem. But I stated above what it was. It made duplicate addresses for some reason so I just needed to set it to "copy 2" to match it up. Took hours of fiddling about but it works now thanks.
good
Hi i had Error 1651 do you know what is to do?
It's mainly related to the ink cartridge
Thanks for your good explanation, if you can explain me how to resolve the error code 7800 that's will be so great
It often means that there is a print head communication problem. Try to change the cartridges, clean the contacts inside the printer, turn off and on the printer but if nothing works the printer will require service. It could be caused by the ink cartridges too
@@viandant5 pls wat is error code 2112
@@remiolasore9699 I never hear that code. It's not a Canon code. Are you sure?
@@viandant5 you are exactly right, thanks. I had non canon printer cartridges that were constantly giving this issue.
Ahhhhh
Tq bai
Is there a solution for 5040 error in canon G4010 series printer
It could be the connection of the optical switch, the encoder wheel or the main board. I think you have to bring the printer to a repair centre
error show change paper. I already did and still get the error code. Why?
What's the solution for code 5104 for mb500
the print head carriage is not moving freely, check for jammed paper or something else, check if the cartridges are correctly installed
Check if the print head moves freely, check for jammed paper or something else, check if the cartridges are correctly installed, try to remove and reinsall all the cartridges.
My MX492 Printer keeps cycling on and off what is the problem?
th-cam.com/video/92iKByJ0-zg/w-d-xo.html&lc=Ugzjp4dJLUbyz5_cud14AaABAg
Hi, how do I fix support code 5B04 on Mx494? Please heeelp
It could be related to the ink cartridge but the manuals don't give any other information
I can't print legal paper,it shows support code 3412
16:47
Please tulungan mo ako mag; check ink 1686 Blk ang printer ko canon pixma tr4670s,.na refill ko na po ang ink. ano ang gagawin ko dito?first time ko pa mag refill.
My printer green light is on but none of the buttons work
Can you please help me with this error canon mf635 error 350_0000
I need to fix it soon
Problems with the main board. check the connectors, it may resolve the problem
@@viandant5
Thanks a lot I will check it
@@مريم-مناف-عدنان No, I don't know. Try Uninet or delacamp
Thank you very much for your helpful videos.
I have pixma ix6820. I t gave me error code 5B00. I tried to fix it but I was unable to go to service mood. Now it looks like it is locked. Any way to fix it.
Thanks
It's the waste ink pad, probably you have to clean it before the resetting procedure
@@viandant5 Thank you for your quick reply/
I can not move the cartridge tray even with disconnecting the power .how to clean the absorber pad.
I don't remember well but on the right of the cartridge holder there should be a cover
@@viandant5 thanks for your response. I think I have to find out how to disassemble it
Hi. Can you help me? Printer canon ts3451 error 7700
The problem could be the power supply
What if the printer is just reading “canon” on the screen?
Mine says that and just keeps turning off and on repeatedly
@@jasonpask same. Just happened to mine today
@@arturoniggazz I ended up unplugging it since it just kept doing it
Is the led of the power green? Probably the main board is defective
Turn off your router then when its on re open wi-fi and print fast...
canon 4527 says paper mismatch.. so what i did is tried every single option letter, a4, a5 etc it still tells the same im lost....
Did you try to turn off the printer and deconnect the electrical cable for 5 minutes?
@@viandant5 not yet sir, its been working great actually its just started when i scan a document, then when i started to use it again to print then that mismatch shows, thnaks
Hi, what do I do for support error 5102?
Check if the cartridges carriage is moving freely, check if there are pieces of paper or something similar inside the printer. Remove any impediment. Make sure the ink cartridges are correctly installed. Press the ink cartridges until they click into place
What if it just says other?
SAVED MY LIFE
Don’t get it how a paper size solved the error 4103 ?
It is caused by the printer settings. Paper size, type of paper, tray
@@viandant5 Yeah, Canon doesn't bother telling anyone that certain models will never ever print letter sized glossy photo paper, but for some reason if you change to plain paper it decides it wants to print after all, but the color is washed out forcing you to edit any photo you want this thing to print to be super dark just to look normal.
I have a canon MG3650 with error code 6900. How can I solve it?
20:14 problem to the wireless network adapter
Is there a solution for error code 5040 for the cannon tr4522?
It could be related to the scan motor scan motor moving too fast. Check whether the optical switch is well connect, check the flat cable. Probably the printer will require to be disassembled
What solutions for code error 6800 (see manual) ??
There is no solution, it could be the main board or if you are lucky the ink cartridge
support code 2110 ????
it means that the paper settings on the PC or on the printer are different from the paper in the printer tray or paper cassette
What is the solution for error 1203?
It an error related to the cover open, or the sensor of the cover is broken
Hi, my printer is problem now, all paper come out by black color, pls find solution 😭😭😭
how to fix up a problem E202-002 in canon mf4800
The only thing you can do is turn the printer on and off several times. If it doed not work it could be the main board, the flat cable between main board and the control board, or a sensor
My printer is a canon. Mx490 and the screen says canon it don’t change and it turns on and off what can i do!!?? Pllz help
The printer turns on and off continuosly?
Mine too, I can’t push any buttons it’s just say canon and turns on and off constantly and moving the cartridge right to left. Please help
@@crinamariana7875 Really I received tens of comments asking how to solve this problem. It seems there is a Canon update of the driver that causes the problem
Turn off your router then when its on re open wi-fi and print fast...
th-cam.com/video/92iKByJ0-zg/w-d-xo.html
10 flashes means critical error. How to fix
The paper tray is not in the correct position, or the paper size is not correct - load the correct paper, or the paper is not correctly loaded, or the sensor of the paper cassette is defective
Doesn’t connect to my wifi do you know how to reset and start again ?
Try to connect the printer with a UBC cable to see if the WiFi signal is the problem. Find a new place for the printer. turn off and on again the router.
@@viandant5 i see on my wifi the canon wifi but when I try to print says it’s not connected
@@knolose1 are you sure it is the right network?
@@viandant5 no that’s the thing so I wanted to do a reset and start again I remember when I set it up it didn’t find my network
My MG2545S printer it says display error , l can't print. Please help
Which display error? Do you have an error code?
@@viandant5 l never print anything, I'm not sure whic error may be on my printer
@@caterisenga7656 I never saw a error message "display error". It could be related to the control panel. Check the connections on the panel