GIVE US A TINYHAWK III FREESTYLE!!!
ฝัง
- เผยแพร่เมื่อ 17 พ.ย. 2024
- Il mondo fpv ha bisogno di un Emax Tinyhawk III Freestyle!!
Aspettando e sperando che Emax lo faccia per noi, ho fatto da me!
E tu, lo vorresti un Tinyhawk III Freestyle?? 😜
𝑭𝒑𝒗 𝒘𝒐𝒓𝒍𝒅 𝒏𝒆𝒆𝒅𝒔 𝒂𝒏 𝑬𝒎𝒂𝒙 𝑻𝒊𝒏𝒚𝒉𝒂𝒘𝒌 𝑰𝑰𝑰 𝑭𝒓𝒆𝒆𝒔𝒕𝒚𝒍𝒆!!
𝑾𝒂𝒊𝒕𝒊𝒏𝒈 𝒂𝒏𝒅 𝒉𝒐𝒑𝒊𝒏𝒈 𝑬𝒎𝒂𝒙 𝒘𝒐𝒖𝒍𝒅 𝒅𝒐 𝒊𝒕 𝒇𝒐𝒓 𝒖𝒔, 𝑰 𝒅𝒊𝒅 𝒃𝒚 𝒎𝒚𝒔𝒆𝒍𝒇!
𝑨𝒏𝒅 𝒚𝒐𝒖, 𝒘𝒐𝒖𝒍𝒅 𝒚𝒐𝒖 𝒍𝒊𝒌𝒆 𝒂 𝑻𝒊𝒏𝒚𝒉𝒂𝒘𝒌 𝑰𝑰𝑰 𝑭𝒓𝒆𝒆𝒔𝒕𝒚𝒍𝒆?? 😜
---------------------------------------------------------------
Le modifiche che gli ho apportato sono:
1 - XT30 AMASS - la modifica più semplice, la meno costosa (anche se bisogna avere poi delle lipo 2s) e che da risultati nettamente evidenti sulle prestazioni del drone e durata della lipo.
2 - ELRS EP2 RX HAPPYMODEL 2.4G - purtroppo non è semplicissimo perche bisogna ribaltare la fc per saldare 2 pad della ricevente e i pad sono piccoli, ma è davvero utile perche la ricevente spi frsky originale è davvero limitata.
3 - HGRLC Zeus Nano Vtx - La modifica meno necessaria a parere mio e non affatto semplice, ma avevo rotto la mia e quindi...😅, però devo dire che adoro sentire il rumore dei motori mentre volo e mi ci rovo bene come vtx. Ho installato una vecchia antenna a polarizzazione circolare super piccola.
4 - CADDX ANT LITE CAM - 1200 Tvl sono in effetti meglio della cam originale per me. Non necessario come cambiamento.
Chiedete pure per qualsiasi info!
---------------------------------------------------
The changes I made:
1 - XT30 AMASS - the simplest modification, the cheapest (but you need to have 2s lipos) and which gives clearly evident results on the performance of the drone and the duration of the lipo.
2 - ELRS EP2 RX HAPPYMODEL 2.4G - unfortunately it is not very simple because you have to turn the fc to solder 2 pads of the receiver and the pads are small, but it is really useful because the original frsky spi receiver is really limited.
3 - HGRLC Zeus Nano Vtx - The least necessary modification in my opinion and not at all simple, but I had broken mine so...😅, but I have to say that I love hearing the motors while flying and I am happy with this vtx. I installed an old super small circular polarized antenna.
4 - CADDX ANT LITE CAM - 1200 Tvl are better than the original cam for me. Not needed as a change.
Feel free to ask for any info!
---------------------------------------------
La mia attrezzatura:
Radiomaster tx16s con ag01 gimball (assolutamente da avere)
Modulo tx radio Happymodel ELRS 2.4g
Skyzone 04x
Emax Tinyhawk II Freestyle con ricevente Happymodel Elrs Ep2, vtx Hglrc Zeus nano
Link dell'Emax Tinyhawk2Freestyle: www.banggood.c...
Track intro: Fuzzeke - Dead All Over
Track 2: NEFFEX - Retribution
#superbaffofpv #fpvdrone #tinyhawk2freestyle
![[LIVE] : ONE ลุมพินี 87 วันนี้!! คู่เอก "ก้องชัย vs โชคปรีชา"](http://i.ytimg.com/vi/YN6e7HVnekw/mqdefault.jpg)
Aweseome flying, love it! But I think if you want 3" 4s, you're better off to go with the babyhawk ii (analogue or hd) - I know it's 3.5" but it flies very similar to 3". The best thing about the tinyhawk ii freestyle is how nimble, lightweight and quiet it is imo. For me, I would want a standard size aio board with 12a escs (although I haven't had a problem with the 5a escs), expresslrs or crossfire (even tho I don't have an elrs module yet, only crossfire), caddx baby ratel, and rush tiny tank vtx. Perhaps a slightly stronger frame as well with more motor protection. And that would be pretty perfect for me!
Thank you Jack!! I really appreciate 🙏.
Yes I agree with you Jack! But emax doesn't have a 3 inch model, the next model of the tinyhawk is the third so... maybe it's just my suggestion 🤣.
But a 3/4s 3 inches emax drone, would destroy the darwin baby ape competition at all.
If they do 2.5 inches again I'll buy it the same for sure man! 😄
@@SUPERBAFFOFpv how about they make a tinyhawk 3 freestyle normal and a tinyhawk 3 freestyle pro, I reckon that could be cool. Where the pro has 1303 motors and 3" props, designed for 2-4s, auw weight around 100-110g and the regular has 1202.5 8500kv motors and the option of either 2" or 2.5" props and 1s-2s, I think that could be a good way to have something for everyone?
@@jackjohnsonfpv8013 the more options we have the better it is 😊. That would be great! hope Emax will hear us! 💪
I have 2 Babyhawk ii quads. Really I want a new TH just for the novelty because it was the quad that started it all for me. 😆
I also have a 2 2.5” quads on 4s550 with 1204 4000KV motors. 4s carry a insta360 Go 2 much better than 3s. The weight provided by the battery gives it better throw too. Video link is from my first flight on 4s so it’s a year old.
th-cam.com/video/fXCQFD2E-D8/w-d-xo.html
@@almostcinematicfpv that's why I wish a 4s drone. Very nice flyer I saw your video ✌️
Super fun! That was a tight, tight little gap! Thanks for the cool video! I'm looking forward to more!
I'm subb'n ya bro!
Oh thank you very very very much 🙏.
I really appreciate you like it.
I'm just waiting for a solid tpu print for my new runcam thumb pro with the crux35.
Would you like to see it? Or you prefer the tinyhawk analog dvr? 😄
@@SUPERBAFFOFpv
I'm fine with an action cam view. Though, DVR footage from the goggle or the quad has that look that I'm used to from flying myself. Slightly more immersive in my opinion. But the thing i love the most is just the while uncut pack footage with some beats added in.
Intros and outros are fine. Or videos with a topic... I like to hear the opinions of fellow FPV pilots and see clips of what they are talking about.
Anyway, sorry... Long comment here... Mostly, just make whatever you love. I'll watch it! Look forward to seeing you grow your channel!
@@averagefpv9449 no excuses man, indeed thanks for these ideas you gave me! ✌️
I miss mine. R.I.P. tinyhawk 🫡
🥲🥲🥲 good boy... 😆
its gonna have elrs with an option for crossfire. still gonna run on 2 1s batteries since its part of their entry level quads. I imagine camera upgrade to the nano 4. vtx up to 400. new motors with plugs but same props. new camera protector. And have a place to mount any run cam thumb and sell mounts for it. I'm also hoping for a new th3 race.
Thank you for sharing! I can agree with you over all except the 2 1s lipos.
Oh man that is the biggest problem of that drone. Believe me, if you change it to an xt30 connector and use a regular 2s lipo, the raise of perfomance will be incredible!
@@SUPERBAFFOFpv I fully agree on the xt30. But we have to remember that it’s part of the introductory line. They want people to be able to upgrade within the tinyhawk series and still be able to use their existing batteries. Then when they want a real upgrade, they can buy a babyhawk2. But right now the tinyhawk 2 freestyle is competing with things like the geprc smart 16, the baby nazgul 68 and 78, etc. personally I wish they would do both a th3 freestyle and then a th3 freestyle plus that is a 3in quad with an xt30 from factory for more experienced pilots.
Hello there. I totally agree we need a new tinyhawk III Freestyle, however I don’t agree it should be 3 inches coz there’s plenty of em out there. Let’s stick to original size. Here’s what I’d like as an upgrade:
1. Standard size FC+ESC stack 16x16 mounting pattern to keep it sleek. Some space in the rear for vtx and receiver.
2. 2-3S compatible.
3. Caddx Baby ratel 2 cam.
4. VTX must be 600mw
5. Arm guards are a must.
6. Proper antenna placement
7. Increase stand-off height.
8. Aluminum standoffs plz.
That would be perfect man! I was very in dubt about my preference between 2.5 and 3 inches prop.
For all other points I totally agree but I didn't want to write too many things on the flight video so as not to be too distracting.
Thank you!!
defo, metal stand offs are a must!
Tinyhawk iii Freestyle 2.5” 3s-4s please.
Let's hope together! 😅
Keep it 2.5in 2s. ELRS aio (non spi) 12amp. HDZero possibly.
Thank you for your opinion!
To be clear, I love this 2.5 2s drone but, it is veeery difficult to mount a decent action cam and the lipo on the drone, as for the size and as for the weight. That's why I would go for a little bigger and powerful drone 😉.
Anyway I hope emax will listen to our needs✌️.
Sure hdzero version is a must!
I feel like having it as a 4s defeats the whole purpose of the tinyhawk, the point of the freestyle to be cheap and easy for a beginner to freestyle
This is for sure what emax thinks too 😆.
Mine was just a personal dream 😊.
Nice to hear your opinion too, thank you!
GIVE THIS MAN A TH3 FREESTYLE!!! In all seriousness though, are you looking to try HDzero in the future?
Ahahahahah thank you!
I'm really undecided whether to take the new dji goggles 2 or the new hdzero. for me the latency can be decisive, but the low penetration of the hdzero system scares me a lot. for now i bought the new skyzone fusion v3.3 module for my skyzone 04x which improves the mix mode performance ahahaha.
I wait to try both systems and decide later
@@SUPERBAFFOFpv I gotcha, I ordered the hdzero goggles and I’m currently running the sky 02x and hdzero vrx and it’s nice. Gonna test out my tiny trainer once it arrives and hopefully post some rips like you haha
@@jataku hd zero goggles are the best goggles to get if you don't want dji. For sure they are the most versatile cause you can use hdzero, analog at the best, and walksnail with the vrx. If walksnail will be on par with dji, there is no reason to buy another goggles but hdzero.
I hope to see you ripping your hdzero drone soon!
@@SUPERBAFFOFpv ill let you know as soon as i post something with it! I figured hdzero would be the best option for me bc its the cheapest hd system, so ill think about moving to dji or walksnail in the future once they also get their latency issues sorted
It is similar quad to the DarwinFPV TinyApe Freestyle.
I totally agree yes. But I heard that the darwin tiny ape does not fly very well stock as the emax
I get much better range with the 350mw betafpv vtx then this hglrs Zeus, i have 2 of each, I'm not impressed with the zeus VTX, also i wonder if those motors can be pushed to 3s with a better elrs aio
Thank you for the informations!
If I broke the zeus vtx too I'm going to try that one so 😅.
But does the betafpv vtx has the microphone too?
Yeah, for me 3s or even 4s would be great!
In my opinion you just keep the frame you put a 12a elrs aio Xt30 of course + nano vtx (with DVR optional)caddx ant or baby turtles. And to be beginner friendly add a little buzzer for motors I tried happy model. 1202.5 6400kv so cool with 2s 350 demoniac on 3s max550.
It is not so easy to change the fc here, because the mounting holes are not so common. You need an adapter for the aio and the lighter you are, the better! Anyway thanks for sharing ✌️👋
@@SUPERBAFFOFpv yes emax should do something about there design. But I easily squeeze it with double side tape and it never moves. And you also can fix classic 4 screws motors with three.
@@lorentacar it is not a common frame I agree. I don't know if the tinyhawk 3 too has this kind of problems...
Wow 😃
❤️
darwin baby ape pro v2! buddy picked one up. 3 inch 3s little thing rips
Oh man I totally agree! I have one baby ape pro, is the v2 worth?
@@SUPERBAFFOFpv if you got the pro dont worry about. the v2 just has different style arms and like 1mm thicker
@@FFSSubaru thank you!
Modifiche interessanti! 👍 Ottimo spunto
Alcune ho dovuto farle a seguito di rotture, ma in effetti l'xt30 e la ricevente elrs sono un grandissimo upgrade!
@@SUPERBAFFOFpv Stesse modifiche che vorrei fare al mio TinyGO... Vorrei cambiare anche il frame ma non saprei quale potrebbe andar bene!
@@ilmanu il tiny go con eliche da 1.6 pollici è completamente un altro drone pero.
Non so quanto ti conviene cambiargli il frame dato che è un drone studiato con componentistica da cinewoop prevalentemente.
Intendi le modifiche che ho fatto al mio emax o quelle che vorrei dal tinyhawk 3 freestyle?
@@SUPERBAFFOFpv in effetti non hai tutti i torti! 🤣 Ma mi piacerebbe un freestyle con il quale imparare un po'
@@ilmanu ti consiglio vivamente il darwin baby ape pro v2 allora. Devi solo saldargli la ricevente che usi e prendere delle lipo 3s se non le hai gia.
Non so se hai visto come vola bene (ho alcuni video del darwin)!
Certo poi se Emax decide di darci un tinyhawk 3 freestyle magari ti consiglierò quello 😊
It's long overdue
let's hope they give us this pleasure 😄
What do you think is better for begginers freestyle 3 or freestyle 2 kit.
Mmmh i don t like a lot both the radio and the goggles of the kit. If you aren't sure about this hobby, it may be a good choise. But if you know that this hobby will be in your life for long, you are wasting your money with the kit. Anyway about the drone, I don't have the tinyhawk 3 so i can't be very accurate. The tinyhawk 2 flies veeery well but it doesn't come with elrs and it is not so easy to change the rx there. The 3 has more weight but it has elrs and a better vtx for sure. I would go for the 3 😁
Thanks. I thik i will be in this hobby for long. I already have 700 hours in simulator and i am trying to take it to real life.
@@Mantinel wow 700 it's a lot! You can win races now 😁. Go out and fly absolutly 💪✌️
@@SUPERBAFFOFpvhi, what do you think i cant choose between emax freestyle 3 or betafpv cetus x. Which shoul i get
@@Mantinel ahahaha they are very different quads. It depends from a lot of factors. The tinyhawk is way more powerful and you can really learn some freestyle tricks. Cetus pro is more safe and it let you learn cruise and little freestyle movements
3" props is the baby line. Tiny hawk 2.5" and less. So I say 2.5" light weight. Have 25mm aio board. Tiny 500mw vtx. Caddx ant or baby ratel 2. 1303.5 motors 4500kv 4s. Or do 6s they have small 6s batteries now. Xt30 connectors
Thank you! Wow on 6s it would be a beast!! 🤩
@SUPERBAFFO Fpv I said 6s because hglrc has a 1303.5 2500kV I wanted to use in a build I never did. (Low pitch 3") .. kV a lil low I think but come on 6s 450mah 🤣 be so cool to just say it's 6s. (2700 to 3000kV 80g drone make a screamer)
@@QSpeedRacer you're making me dream! 😄
I would LOVE if emax gave us the th3 freestyle, but I have to disagree with you a bit.
3 inch props and 4s batteries would make a drone very diferent than what we have here, so there should be a seperate line of drones with those specs while the tinihawk remains tiny.
What I would love to see in the the drone is an all in one board that can safely handle both 2s and 3s because 7500 kv is a bit low for 2s
It's nice to hear different opinions and maybe change your mind. (mine especially haha).
you are right, surely it would be a completely different drone, my idea is to destroy the competition with the darwin baby ape (which i also love how it flies but i would like a little more power).
Thanks for sharing your opinion! 🙏💪
Did you change the lipo connector with an xt30? It makes huge power difference
@@SUPERBAFFOFpv I have bought the drone as an rtf kit so I had to buy a chager, an xt30 and new batteries. My mistake was buying the batteries from aliexpress, so after about 3 months of waiting I got 6 1s batteries instead of the 3 2s batteries i ordered
@@leonardterlevic4765 ah ok it may happen! You can consider it for the future! 😉
What websites are best for ordering batteries and drone parts in your opinion?
i do not believe analog is dead in any way. people are just getting suckered into buying hardware when they are new in the fpv hobby. for the rest of us that have been flying for a long time and alreday have gear. i use regular fatsharks dom v3 and dji v2s. if i want to quality image i just use a hero session 5 the small cube. if ya want more power get a battery with a very high c rating LIHV. dual bladed props are faster than tri blades. you can also play around with bluejay or bl heli and make tune adjustments to the motors for better performance. but do yourself a favor and dont get sucked into buying something you dont need that gives you a slightly better flight performance. its just not worth it, untill they are offering more range and improvements that are more than a slightly better image i cant justify upgrading much. example the dji o3 air units over the caddx vista. your going to see some better 10 bit color edges are a little clearer but you wont notice much different in how it flies and handles, at most you get a better sd card recorded image...
I absolutly agree with you Matthew! Also because payed youtuber are pushing to buy new products.
I'm happy with the growing of hd tecnology but i'm going to purchase it later and without leaving analog at all for sure ✌️.
I would like to have a newer model of the tinyhawk freestyle cause it has a d8 receiver, 200mw vtx, and 800 tvl camera. Also because it is my first drone and there is a sort of romanticism behind this request hahaha
so many people rush into this hobby to learn it, i would suggest to people focus on the flying part of the hobby, and take your time doing it, because it doesn't take long to learn and you will save yourself quiet a bit of money thru experience over watching videos and buying hardware that you dont really need
@@matthewwilken2051 yeah just send it!
Emax tiny hawk 4” with f7 20/20 stack with 1300-1600 motors .tbs nanoPro 32 vtx and ratel2 camera!
BAD ASS! Just say n
Wow you want a beast! 😆💪
Why? Just build a 3” quad. The first 2 fell short in durability with the electronics. Why would we want a 3rd…😂
Btw analog is dead. Throw an hdzero or walksnail system in it.
I love your irony man 😊! Anyway I think it's really very subjective, and negative opinions are also welcome. for me, it is the best flying drone of mine despite everything.
it is the drone that has taken the most falls and at most I have broken the vtx.
clearly a third model is also meant with all the better electronics.
And clearly too, hope it will be some digital versions too.
analog is still alive to me, and i'm sure i'm not the only one✌️, but for sure hdzero now with their new goggles will be the end of analog in long term.
Thanks for sharing!
Analog is most definitely NOT dead.