Are there any troubleshooting methods? I have assembled the robot exactly the same, with the same components, but no matter how many PID combinations I try, the robot can't seem to balance. It gets really close, but never gets there. Also my motors move really fast and then the robot falls
@@Science_4U_ thanks for the response. I initially had 60 RPM motors, however it could never catch the weight of the robot. As such I got newer motors which had more torque and rather reduced the speed in the code (speed factor). The robot is very close to balance, however it just doesn't get there. As if it's missing something...
Okay friend. This is definitely a working project. But it is a bit difficult to make this with cheap BO gear motors that I have used. You need to use high quality NEMA servo motors with encoders for getting good results. However, you can try. It will work.
Hlo sir in the code it is showing "compilation error: PID_V1.h
What can I do right now
Superb Work🔥🙌🏻
Thank you so much..❤️🥰🙂
u have a video that getting the value of xyz of the gyro ?
Really nice!
Thank you. 🥰❤️🙂
Bro can we use 10,000mah to power l298n motor driver
Yes friend. It is definitely possible. 👍
@@Science_4U_ tnks💞💞
Are there any troubleshooting methods? I have assembled the robot exactly the same, with the same components, but no matter how many PID combinations I try, the robot can't seem to balance. It gets really close, but never gets there. Also my motors move really fast and then the robot falls
You have to use lower speed motors..100rpm and 60 rpm motors are good for this. More speed will make it easily unstable..
@@Science_4U_ thanks for the response. I initially had 60 RPM motors, however it could never catch the weight of the robot. As such I got newer motors which had more torque and rather reduced the speed in the code (speed factor). The robot is very close to balance, however it just doesn't get there. As if it's missing something...
What is the battery output voltage
@@Mahesh31704 Hi friend. I have used 2 Nos. of 3.7 volt 18650 Lithium ion batteries. So total output voltage will be 7.4Volts..
Super😊👌👌
Thank you so much..🥰🙂❤️
hello do you have the project file of the 3d printing body?
I need it
I have an error compilation: exit status 1 how can I solve this error?
sir 12v ki battery laganese fi low current dikha rha he
Do you have the dimensions for the 3d printed parts?
When I run my robot, it oscillates uncontrollably and then does not stop oscillating. Anyone else experienced the same issue??
Filter Your Sensor Value and Change Your PID Value
Why is the motor running so fast that I can't control it and the mpu6050 doesn't respond to the code? Is there an error?
It show
avrdude:ser_open(): can't set com state
download ch34 driver
Could you please shed some light on motor encoders...
With reference to this project of course...
Hi friend. The motors that I have used are very cheap BO geared motors which doesn't have any encoder. So, encoder is not used in this project.
I can't get the code
It is in the description
Hello, may I have the 3D print model in a STL file for printing friend? please
can you Please share the 3d print stl file
Bro, can i have 3D model printing?
Hi friend. Did you mean that you want the 3D model STL file for printing?
@@Science_4U_ yes bro
@@Science_4U_ can you share the stl file please
sir please also add a the stl file of the 3d printed parts
Bro i want to make this project
Okay friend. This is definitely a working project. But it is a bit difficult to make this with cheap BO gear motors that I have used. You need to use high quality NEMA servo motors with encoders for getting good results. However, you can try. It will work.
Hi friend, I want to 3D model STL file for printing
I am building this project but it is not working when I connect to battery it just runs in one direction
Have you solved
this issue...i am facing same issue
I dont have an arduino uno i have a nano, but when I upload the code nothing happens ;( can u help me plz?
its for a enginnering fair thing in school
PLLzzzzz help
Can you please provide 3d print files
Pls x2
Bro where is circuit diagram
Açıklamalarda
Are there no converters required to ensure that components aren't blown?
Bro i want to make this please can you help me
Yes sure friend. I can help. What is the help that you want?. Have you tried making this project?
@@Science_4U_ yes bro I want to send you some videos of that so I can solve my problems
@@umangpatel158 okay. Please send videos to the channel Instagram ID. I will have a look.
Bro your insta id ?
@@Science_4U_bro insta id ?
Pls give us stl files
batteries voltage?
Hi friend. I used 2 Nos. of 3.7V 18650 batteries. So total 7.4 volts.
@@Science_4U_ u think I could use a 9V battery?
Yes. You can use. But if you are using small 9V batteries, it will get discharged very fast. Like may be in less than an hour..
Budget mip
??
Bhai stl file dedo
Bro i have Arduino mini broad
@@technicaldoctor3661 That is good enough to make this project. All arduino boards uno and mini use the same microcontroller.