Springfree trampoline spring rod removal
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- In this short Springfree trampoline instructional video I explain the best technique for removing a Springfree spring rod from the mat.
This Springfree trampoline was a large oval model (092) but using this technique should help with the removal of spring rods on Springfree trampolines.
Removing a Springfree rod can feel almost impossible sometimes unless you use the right technique. I explain the stance, hand position and movement as well as the application of water to help.
Website - www.thebaytrampolines.com
Facebook - t.jo.my/thebay...
Springfree trampoline official Page - www.springfreetrampoline.com.au/
Thanks so much Lucas
I was trying to pull the rods out to change the net this morning. I was ready to set the whole thing on fire, then set my house on fire before driving my car into the wreck. Your video saved my trampoline and my life.
Hahaha love this comment 👍🏽 happy to have helped
Haha that’s one of the best comments 😂
Hahahahaha I jist bought one of these off a buy and sell so I was looking at tutorials as the pickup is 10km down a dirt road. Reading the comments now. This one had me laughing. Glad you were manage to salvage the trampoline, car and your life. Bravo 👏
I know it's been 3 years for you, but THANK YOU FOR THE VIDEO!! It saved me from disaster!!
Really glad it helped 👍🏽👍🏽
This tutorial saved me just in time for a move, I was struggling to understand Springfree’s manual! Thanks so much, and take note Springfree
Mate
Fuckin life saver, was trying a different technique, broke 3 in an hour, using yours got them all out 5 minutes
Don't hesitate for a moment to engage Lucas, you'll save time and stress getting your trampoline assembled or disassembled by a pro. Thanks Lucas for providing a first class service.
It was my pleasure helping out Richard 👍🏽👍🏽
We couldn't get ours to fully budge using this method so we had to combine this solution with another one we watched on YT. What we did was use this method to half-push the rod out, then go underneath and spray the joint with water, lie on our backs, grab the rod and use our foot to push the plastic joint free from the rod.
Yeah they’re not easy to take apart - well done
Thank you!
Yeah I found this was 100x easier when wet.
Hey, thanks for this. It really made all the difference when we went to do this. And mad respect if you are doing disassembly and assembly as a one man team. That is impressive.
Happy to have helped mate 👍🏽
Thanks man. I just picked up second hand Springfree. And I was able to disassemble in half an hour. It helped alot 👍🏻👍🏻👍🏻
Great to hear!
Great - happy to have helped
Thank you for the tip! Took me about 45 minutes to get all the rods out. Could not have done that without you!
Really glad I could help
Thank you. This video saved me. I got a trampoline second hand with no idea how to take off the mat. It nearly killed me taking it apart but with out this video I would have been lost. Thanks again.
Happy to help mate
Thanks for the feedback 👍🏽
Awesome tips Lucas you saved us a lot of time pulling our Trampoline down with in 20 minutes it was all packed up, this was a worth while video to watch
Great to hear!
This worked out great. Also will add that if the mat is wet it makes this 100X easier.
Glad it helped 👍🏽👍🏽
Thanks mate, you are a life saver. I tried the 2 person method with my son and it took about 15 minutes to remove 3. Was about to call Springfree and pay them but luckily found your video first. Still wasn't easy but it worked.
So glad to hear that the video has been helpful for you 👍🏽
Thanks for this video!! It really helped my husband disassemble a springless trampoline faster. He watched a video before this and it didn’t help him at all. Once I showed him your technique he was powering through it. 😅
Glad it helped!
Pleasure to help 🙃
Thanks for video! My husband and friend found it easy also to have the second person underneath the tramp and pull rod towards them selves while person out outside pulls ball out of socket.
Great job!
Best video! Super helpful. Got the whole thing done on my own in less than 30 mins! Thanks Lucas!
Glad it helped!
Thank you. No way I would have figured this out on my own. The same tip works for reassembly as well. In total it took me 2 hours to relocate our trampoline. Done and done.
I’m planning on doing this and was dreading it. Your video is thorough with clear explanation. All the best with your business, thanks for sharing
Good luck with it - the first few are always the toughest - once you’ve taken off 2 or 3 in each section it should get easier
Well done, thanks for the great explanation. I'm moving one for a client tomorrow. This is a lifesaver
This video helped so much! Thank you!
Happy to help Alex 👍🏽👍🏽👍🏽
Thanks brother. I own a small moving company and I was your exact position. Cheers!
Great video. Short, to the point and very helpful. Thanks
Tks a lot. Appreciate your fast and well explain vidéo !! 🙏
You are welcome!
These things are way more of a pain to take apart had to do one today for my boss
Yes they’re not easy - hopefully this video helped you out
That’s awesome!
Thanks mate
No problem 👍
Thank you
You're welcome
Since you work with both, what's better? Vuly Thunder or Springfree?
Personally, I prefer the Springfree
Thank you so very much for posting this video 👍
My Pleasure Joe
Broke wrist and lower ribs. Got one rod out. Send more directions
If you’re unable to remove them using these instructions, it may be best to get a specialist
Bro U are the mo fo man. Thanks for posting this
Lol my pleasure
Need a video on how to take it down... can't figure out how to remove the tall rods from the net. So the trampoline can be packed up.
The net rods can be VERY difficult to remove from the net…thanks for the video suggestion - I’ll keep that in mind
Thanks mate, you helped me out 👍🏾👊🏽
Thank you so much! So helpful.
Can you reattach them because 1 rod came out
Yes they can be placed back in doing the reverse of this process or If you live in Sydney/central coast of nsw I can help
Great info helped a lot
Thanks this was very useful
My pleasure Martin
Thanks. This made it possible to do myself. The only thing I'd add is there's a little switch on the top spring holder. Flipping that switch makes it a lot less difficult to release the ball (see th-cam.com/video/X2ESUFbsCRc/w-d-xo.html but don't use vice grips, use the Bay Trampolines method with also flipping the switch). I couldn't get a single rod out before I found the switch. After finding that, I had the whole thing down by myself in under an hour.
Hi Rob
Happy to have helped 👍🏽 the switch on the mat connector that you’re referring to are on older model Springfree trampolines but is definitely worth mentioning - thanks for the feedback
The BAY guy must have super human strength. I could NOT do this. These things would not pop out.
I tried using a WRENCH but you just have to be gentle with it or snap the plastic holders.
Fold the mat back a little then wiggle it a bit and then POP, they will pop out eventually. Finally got mine apart!
Thanks for the tip, I've been offered a springfree that's about 12 years old so long as I disassemble it myself to take it. So I'm guessing it probably has these little hidden switches that I now know to look out for.
Magic!!!
😆
Hey - just replacing the trampoline floor - stuck on the first step of lowering the netting below (outside) of the white pegs. Any tips :)
Hi - do you mean the netting is too tight and you can’t get the net over the floor/mat? This can happen sometimes....sometimes it helps to gradually lower the net until you get to one section that’s still over the floor/mat and then try to lower that section gradually - the net is pretty rough and can handle being pulled about roughly. If that doesn’t work you could just leave that section over the floor/mat and start taking out the rods in the correct sequence - it just means that when you remove the rod at the area where the net is still up you have to take out the rod as soon as you release it from the mat so it doesn’t leave tension in the net...does that make sense?
@@thebaytrampolines6543 Yes that is what I meant, the net is too tight to pull down around the outside. Tried a few ways but cant seem to get it. Was considering the rod removal, so will go ahead with that. thanks for the advice.
Good luck 👍🏽
Maybe show the order first 😢