yea huge assist T. i got the squeal on my 95 tracker! mostly when i turn the A/C on! replacing both though! I'm gonna remove the belts and take them to Oriellys with! YOU, SIR ARE A GEO TRACKERS BEST FRIEND! CANNOT EXPRESS HOW MUCH I APPRECIATE YOUR VIDS AND PARTS YOU SELL! iVE BEEN A WRANGLER GUY FOR 30+ YEARS AND STILL AM BUT MY TRACKER( GIFT FROM MY SON) IS MY NEWEST PRIDE AND JOY! iT'S IN AMAZING CONDITION AND WITH YOUR HELP IT'S GONNA STAY THAT WAY!!! however I'm a PBR guy! sorry T BUT MY ALTERNATOR WILL NOT BUDGE ROD OR NO ROD GRRRR! REMOVED ENTIRE BRACKET EXCEPT BOLT UP AGAINST OIL DIPSTICK HOUSING ( NO CLUE IF THAT COULD EVER COME OUT) SO I GUESS ILL GO BELOW AND TRY TO FREE UP HINGE JOINT (PB BLASTIFICATION...)GRRRR! THEN LIKELY PUSH UP ON ALTERNATOR WITH A SMALL FLOOR JACK AND PROPER LENGTH 2X4 You make it look awful easy T THINKING (WITH PBR BRAIN) I SHOULD JUST REPLACE ALTERNATOR NOW! HMMMM...
Can you do a video on how to change an ignition switch, i changed my starter, battery, ground wire from battery and starter, relays and i still get a one click no start
So I just bought a 1989 Sidekick first one, had it for a week. I'm driving home the other day and all of a sudden the battery light came on and engine temp started climbing. I pull over and look and one belt is nowhere to be found. I replaced both belts using this video,since the other belt was cracked and looked old. Now it is squealing so bad. Since it wasn't before I lost the belt is it maybe an adjustment bolt thing and not any of the pulleys? If so where do you know where the right adjustment is? Thanks for any help.
@@Hwy83SUZUKI I actually did tighten them today or at least the one because the other seemed tight enough. Now they don't squeal when starting the car or at idle but they start squeaking and squealing again after I drive over 30 mph and then they don't stop until I shut the car off.
Hey Tony, do you know the part number for the belts right off? I went to autoZone too and I put the belts on and they are both too tight! I misplaced the old belts so I dunno what they were. I have the same exact 16v setup as this one
This channel is pure gold!
Thanks for watching!
You have no idea how helpful this is, and entertaining!! Thank you!!
Exactly what I needed 🙏
Thanks for showing with and without acceories
yea huge assist T. i got the squeal on my 95 tracker! mostly when i turn the A/C on! replacing both though! I'm gonna remove the belts and take them to Oriellys with!
YOU, SIR ARE A GEO TRACKERS BEST FRIEND! CANNOT EXPRESS HOW MUCH I APPRECIATE YOUR VIDS AND PARTS YOU SELL! iVE BEEN A WRANGLER GUY FOR 30+ YEARS AND STILL AM BUT MY TRACKER( GIFT FROM MY SON) IS MY NEWEST PRIDE AND JOY! iT'S IN AMAZING CONDITION AND WITH YOUR HELP IT'S GONNA STAY THAT WAY!!!
however I'm a PBR guy! sorry T BUT MY ALTERNATOR WILL NOT BUDGE ROD OR NO ROD GRRRR! REMOVED ENTIRE BRACKET EXCEPT BOLT UP AGAINST OIL DIPSTICK HOUSING
( NO CLUE IF THAT COULD EVER COME OUT) SO I GUESS ILL GO BELOW AND TRY TO FREE UP HINGE JOINT (PB BLASTIFICATION...)GRRRR! THEN LIKELY PUSH UP ON ALTERNATOR WITH A SMALL FLOOR JACK AND PROPER LENGTH 2X4 You make it look awful easy T THINKING (WITH PBR BRAIN) I SHOULD JUST REPLACE ALTERNATOR NOW! HMMMM...
Lol i been struggling with a belt for years now waiting on a video like this but better late than never great stuff..
Great video man real handy stuff. I want to suggest a video on how to use timing light and adjusting the distributer.
he's already made one! its here on his channel!
@@Chefbriank I saw it bro, I'm very happy
"I don't know how we got the wrong belt, but it happens"
such is the zuk life
🤣🤣🤣👍
Hey Tony my 1994 geo tracker has ac power steering but it has a Touch your pulley instead of a slot to move the ac?
Can you do a video on how to change an ignition switch, i changed my starter, battery, ground wire from battery and starter, relays and i still get a one click no start
Ignition switch is covered in this video th-cam.com/video/5wDO9yeZFcw/w-d-xo.htmlsi=Li5P67pFuAuiMp_R
@@Hwy83SUZUKI thank you
What were the correct part numbers at AutoZone?
My idler pulley did a thing I've never seen one do, and it exploded internally 😭 I'm so done with today 😭 the belt snapped when it exploded 😭
Thanks gang
So I just bought a 1989 Sidekick first one, had it for a week. I'm driving home the other day and all of a sudden the battery light came on and engine temp started climbing. I pull over and look and one belt is nowhere to be found. I replaced both belts using this video,since the other belt was cracked and looked old. Now it is squealing so bad. Since it wasn't before I lost the belt is it maybe an adjustment bolt thing and not any of the pulleys? If so where do you know where the right adjustment is? Thanks for any help.
@NTashaHunt clean the pulleys and tighten belt. Sometimes need multiple attempts of tightening to eliminate squeel
@@Hwy83SUZUKI okay thanks I'll try that!
Not looking forward to the day I have to replace that alternator though grrrr!
I have AC and power steering. What do I have to do to bypass myAC?
it is possible to fix sequential shifter for suzuki samurai
Hey so mine are squealing brand new from the mechanic. Do they have to break in? They seem not too tight or loose. Thanks
Tighten them again. These belts can be a pain to stop squealing. They usually stretch after driving a week or so and need to be adjusted again
@@Hwy83SUZUKI I actually did tighten them today or at least the one because the other seemed tight enough. Now they don't squeal when starting the car or at idle but they start squeaking and squealing again after I drive over 30 mph and then they don't stop until I shut the car off.
Hey Tony, do you know the part number for the belts right off? I went to autoZone too and I put the belts on and they are both too tight! I misplaced the old belts so I dunno what they were. I have the same exact 16v setup as this one
O btw love ur channel!
Tommy ran off in fear of the big johnson
Bahahaha! 🤣👌
😂good job explaining
This guy is thee best!! 🤣😭🩵👍🏼💪🏽, miller time bbyy!! Eeeeeeyeahh!!