How to repair the window motor on a '90 F-250

[@BMB-d7b]

Thank you! Really appreciate you taking the time to create and post this video. I will be doing my windows soon and didn't know why I could hear the motor but wouldn't roll up. Now I know. Thank you.

[@creswick]

Thanks! The window on my '90 f250 just stopped going up, and this is a huge help.
Next time you're using a stainless driver & wish it were magnetic, a dab of grease also works (as long as you're OK with getting grease on the fasteners, of course...)

[@rocketroy469]

Thanks I learned a lot ..including the fact you’re a nice guy ….now to tackle mine

[@BlackHills68]

Thank You!! You saved me so much time and trouble. It was an easy install thanks to you!!!

[@royarena6232]

Very helpful and thorough video. Thank you sir!

[@bstrom1953]

Be careful when drilling the holes. My bit grabbed like it does when drilling through sheet metal causing it to go clear in and hit the head of the bolt, knicking it bad enough that I couldn't get the nut driver on it! 9 mm was too big, 8 mm wouldn't go on, and 5/16 wouldn't go on Finally had to cut a bigger hole to get at the bolt.

[@sativafourtwentie]

You could also just put the window up and tape it, then drill out the rivets holding the whole assembly (window regulator and motor) and then take it out and do this repair on a bench. The only downside is that you need a rivet gun and a basic rivet set to put it back together.

[@mikepearson7608]

Thank you

[@CJINW]

Thanks.

[@dougloose2399]

Did you just order a rebuild kit?

[@JohnnyLooseTV]

Parts at 8:50. Bookmarking this for myself later 😅

[@ekd1985]

Just pinch