Preventing Catastrophic Engine Failure | 6.7L Cummins Banks Power Install
ฝัง
- เผยแพร่เมื่อ 4 มิ.ย. 2024
- Save your truck, and increase your power. Banks Performance parts and accessories now available:
www.customwheeloffset.com/bra...
Banker’s 5th Gen needed some power gains after the lift kit and 37’s went on. Banks has these trucks down to a science and have everything he needed to upgrade his Cummins engine for more power, AND ensure catastrophic engine failure doesn’t happen.
Products featured in this video:
0:46 Banks Cold Air Intake 42279
3:10 Banks Aluminum Boost Tubes
5:02 Banks Monster Ram Intake
10:49 Banks Monster Exhaust with sidekick tip 49798
Follow our personalities on IG:
Banker - @Banks_Z71
Dustin - @Dustinn.co
Junior - @Arkon.oj
Lawson - @Lawsonn.co
New to the Channel?
Watch This ► • 5 Things You Didnt Kno...
From educational to bad-ass truck stuff we upload multiple videos weekly
Subscribe here ► bit.ly/3MjColh
Looking to Become a Custom Offsets Ambassador?
Join the team ► www.customoffsets.com/ambassador
Rock some Custom Offsets Merch
Merch ► www.customoffsets.com/gear
#liftedtrucks #wheels #trucks #bankspower - ยานยนต์และพาหนะ
![[TH] VCT Masters Shanghai Playoffs DAY 5 // 100T vs PRX | FUT vs TH](http://i.ytimg.com/vi/q75pv359eP4/mqdefault.jpg)
Thanks for sharing the install! If you like the Monster-Ram, Boost Tube Upgrade, and Monster-Exhaust, you'll love the PedalMonster and iDash with our new Stealth Pod that mounts to your factory A-pillar!
Will the monster intake void my warranty I just bought a 2022 Ram 2500 and I want to install this but not void my warranty
@@stephenamador5360The Magnuson/Moss Act says your warranty is still good.
@@stephenamador5360 not if you overpay the dealer to install it.
@@stephenamador5360 did you know these rams have big issues with lifters?
@@stephenamador5360 anything not OEM almost always voids warranty.
Lol that soot falling out all over like this is going to save his truck 😆
just installed monster ram on customers 18 3500 cc truck just put number 1 fuel line on before monster ram intake you will be glad you did.
Yeah can’t wait till I get my intake out of the mail truck and would love to have the rest of your stuff
SUPER SCOOP!!! 😂 love it was binging teh LBZ builds. and then youtube sent me this.
All those parts and you can kinda hear the turbo 😂
About how much did this combo set ya back? Been interested in making my 5th gen more efficient as well as a bit more pep! Thanks
I have an 08 and the intake ram raises the dipstick to make contact with the hood is there a remedy for this?
Yesterday I saw one of yall builds here in minnesota looks great would have gotten a picture but was in a hurry
love the sticker that said "BIG ASS FILTER" lol
Hey what should I do to my LOL dermax it is bone sock it just a straight pipe cats tell me what I can do please thank you I would appreciate it
My 2017 just turned 120k ordering the monster ram and grid heater delete in the next couple of months.
I run mine without the the plastic cover over my filter and I get way more turbo noise and it runs the same as with the cover
does "THE BEST intake horn" support dual fueler or nah
I also recommend the Pedal Monster. Now if Banks would just get the damn Derringer on the market for the 6.7 Cummins. Come on @bankspower, the Derringer has been "coming soon" for the last 2+ years. No more excuses, lets get it done!
Still dont have it wtf
How much did all that set you back?
I bought the big air horn for my 2023 and the plate is different now what ?
Before and after dyno videos would be perfect. There are very few for any trucks and I always am looking to see how much these actually improve trucks
BANKS has all the sheets to back up their products. One of the few companies out there that cares enough to prove it.
@Banker Offsets Garage they don't mention that the restriction is the cylinder head though. Cool it flows the most but the cylinder head can't accommodate all that air 😂
Banks has zero data for ram intake in term of how much horse power it adds. Why? Because it adds zero ? You would think he would back it up with numbers for power
I would be skeptical of any gain over 20hp without tuning.
@npp3cc - Your statement about the cylinder head is backed up by what information? Do you have a flow bench?
Can't wait for you guys to put out a video on the recent truck wheel coming off on highway that launched that Kia.....
Hmmmm...
@CustomOffsetsTV maybe reiterate the video on use of proper wheel spacers or what may cause this sort of major problem lol
I have the same truck and almost rim set up what front lights are those
Alpharex’
How many watts does the Banks heater put out vs the stock Ram grid heater and is it enough to start your Ram in -40 F?
I live in canada, will the banks heater start the truck in -30C?
Absolutely not
track barely starts with stock grid heater at those temps lol@@repairvehicle
Has anyone gotten the p0402 code? I installed the Bank's CAI, boost tubes, and the Monster ram horn elbow and now I'm getting this code since the install.
Thank you for sharing this
After installing the Monster Ram grid heater replacement, how hard is it to change the fuel filter right behind it?
Still very accessible
I wish Banks would offer the exhaust in black powder coated.
I have a 2020 Ram, I live in NC. Would you recommend getting the monster ram replaced regardless the weather temperature? Also, if I install the monster ram, do I have to upgrade the boost tube or that is optional? My truck only have 48K and still with warranty. If I do any of those upgrades, will that affect the warranty? Just asking. Thanks!
The efficiency and performance alone is worth it.. and all components can be done alone but work best together
I seen few videos b4 and after on cold air intake and they said they didn't notice a crap,,
Why do you think banks website does not have any numbers for horse power gains?
Sweet 001
so 3 gen dosnt got the greed heater problem?
To do this setup did you have to do any tuning?
No tuning required!
Banks Ram-Air, Sinister Pitbull Series Turbocharger 👍💯💯
Can you get away with the stock boost tubes with the 4 inch monster ram intake?
Yes!
👍🏻 Any other plans for this truck?
😏😏😏
Do an s&s cp3 conversion next before the cp4 grenades
RAM already recalled them, just waiting for them to have CP3s available
@@bankeroffsetsgarage9814 true. You can also buy the s&s kit and be reimbursed by Chrysler. S&s is a way better pump than the Mopar one
@@bankeroffsetsgarage9814 we all still waiting...
I have over 400,000 on my 2015 6.7 Cummins without the banks ???
Does the truck still have EGR?
Yeah
What would the labor cost just to install the monstor ram intake ?
Depends on the shop
@@CustomOffsetsTV ballpark price? I really want to get that done. Thx
Notice any fuel pre-heat difference (slower, faster)?
Nothing noticeable
If you really wanna bulletproof it, just delete and tune it
You mean do a after treatment rebuild right 😉
What headlights are those?
AlphaRex!
Josh McCormack made 2000 horse on a stock intake horn. Don't think a stock one needs one...js
All that and its still not deleted
You are correct, during THIS video it was not. Who said it wasn't now?? The EPA is probably watching these comments so no its not... 😉
it’s “heat soak”
You can only force some much air thru a stock head so it's all just for looks.
Well, it lets some good sound out as well.
A DPF back exhaust is a glorified exhaust tip. Exactly zero performance or sound change.
BANKS would beg to differ.. obviously deleted trucks make more power but theres always room for improvement to the factory parts and this exhaust achieves that. It's minimal, but it helps!
@@bankeroffsetsgarage9814 I just can’t see it. You are limited by the DPF and SCR no matter what. Banks makes some killer products but some are questionable like this.
@@CatRichardBojangles Contrary to popular belief, you can indeed improve power by reducing backpressure after the DPF. First, the DPF is not as restrictive as people are led to believe on the internet. DPFs have come a long way since they debuted in the early 2000s. Second, let's look at the exhaust system as multiple drinking straws. We've all tried to breathe through a drinking straw. Although hard, it is possible. Now add a second straw thereby doubling its length. It gets harder to breathe through. Then add a third. Now it's almost impossible to breathe through. But what if those straws each progressively got larger in diameter so the third straw was three inches wide. You'd be able to breathe through them. Why? Reduced backpressure. Enlarging the straws effectively makes them act as if they were shorter. That's what the Monster-Exhaust does. By reducing backpressure at the tip of the exhaust, less energy is used by the crankshaft to expel exhaust gas during the exhaust stroke. That means more power from the power stroke can make it to the wheels. Remember, only one stroke makes power. All other strokes use power. If you reduce the amount of parasitic horsepower loss on the exhaust stroke, you liberate power that can now be put to the wheels.
someone did a dyno run. banks made more power with just the monster exhaust!!!
@@bankspower it doesn’t matter what size the straw is when at the beginning there’s essentially a cork in it.
Other than the intake, im beginning to think banks is a scam… I find it funny that he talks up emissions like they’re so great but when he builds motors they have 0 emissions on them
Caleb, if we could sell engines to the general public with no emissions equipment, we would. Unfortunately, it's illegal. Currently, we sell complete engines for military use only. The engines can be found in all JLTVs, as well as various tracked, wheeled and off-shore vehicles. We do not make the decision to design and build engines with or without emissions equipment. The U.S. Gov't sets emissions output standards for defense engines. Currently, it appears that after-treatment systems are viewed by our government as a potential point of failure that could put a soldier's life in jeopardy. Of course, if they mandate aftertreatment systems, we will build engines accordingly.
Fines and lawsuits aren’t worth it
I honestly thought he was gonna delete it
But thats illegal! 🫢
Delete and Tune!
What's the dyno difference between stock and banks?........... ya, go ahead, I dare you
Isn't this the same guy who kept referring to Dodge trucks as fiats in one video? It's kind of hypocritical, isn't it?
It's still a Fiat, just with a Cummins in it
Well how’s it hypocritical when he’s right?
@Custom Offsets
When you put it out there that you dont like a particular brand, and then buy one, need I say more.
You gotta trash talk all brands equally
Your reading to much into it. Are you surprised a so called TH-cam personality just says whatever he wants depending on the crowd or subject matter. He hardly knows what he is talking about
As I Was Slowly Passing An Old Friends House One Day I Had 🛑 For A MOMENT Just to Watch The children play And As I was Slowly Passing I Saw Myself STANDING ALAlone And when I Asked him Why He Was Standing All Alone She Turned And Smiled With Eyes That Could Not See And Said “I’m NO Bodies Child, I Am NoBodys CHIld Just Like the flowers I’m Growing Wild, NO Mommas Kisses And No Dadys Smile NOBODY WANTS THEM LORD! They Refuse to TURN AROUND And Call On Me