This things gonna be sweet, but make sure you put grease on the swingarm bolt because if not the bolt can seize the the sleeve in the engine and you won’t be able to get it out!!couldn't tell if you greased it or not though, love the vids
Wow! Looks great 👍🏽 I’m surprised you didn’t grease any of your bolts, particularly the swing arm pivot bolt and linkage bolts! They won’t come out easily next time for sure😬
FYI if you pack the bearing from the other side you will get a bigger volume of grease into it which should take less time. For future reference of course.. great bike build
Loving the build but have u checked a manual as there is normally a specific pattern to tightening engine mount bolts, usually starting with swingarm then bolts thru the engine then the ones thru the mounts and frame, all shud b snugged first then torqued in correct pattern to correctly align everything and make sure nothing binds, this is very important!!!! Thanks for showing!
Its like a brand new dirt bike! Nice chassis, I have my 150ccsport motorcycle,I wish to change my frame and fork in a real dirt bike, ImFernado O. Galapin of Concepcion Uno, Marikina, Metro Manila, Philippines. just seeing your demo of assembling the dirtbike.
I could watch the full build in one piece with the music and love it the whole way. It is soo captivating. Stay motovated. Ps. Do you plan to re sell those tshirt?
I'm a bit young for asking this question But is it possible to buy all the parts straight from the factory And cut the amount you need to pay for a full bike?
Are you going to play with engine mounts mods (drilling for example) to get more flex from the chassis? It is said to be a game changing mod with these stiff rmz frames.
Dirt N Iron pay some attention to the engine mounts on factory rmz 450. Their engine mounts quite thinner than stock to get flex. In UK some teams are drilling stock mounts to get the same for cheap. Actually, you can buy used engine mounts for 20-30$ just to try.
It's so rare to find someone that can wrench ride and make bad ass videos. Keep up the good work. Subbed back when you were at 18k. Channel keeps growing.
Hey man, these motorcycles are pretty expensive her ein my country,i want to start a project a build mine, i have no clue at all,anyone knows any article that show sme what parts do i need ?
Dirt N Iron sound mate can not believe you have replied thanks so much for the advice mate I will make sure I sort that out what camera and system do u use thanks again for answering me god bless and safe riding bro
![[#2024MAMA] G-DRAGON - 무제(Untitled, 2014)+POWER+HOME SWEET HOME+뱅뱅뱅+FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/Ox29z5Nf1Uk/mqdefault.jpg)
That frame and swing arm and everything is super clean 👍👍
Thanks Mike
Cant wait to see this bike finished!!!
Nice man! I'm one of your supporters. 😀♥️
thanks man!
The most satisfying part of a complete restoration right there!
She is looking really good! I can't wait to see it finished! Thanks for making these videos.
thanks bro, my pleasure :)
Great video as always, I can’t wait to see you ride this RMZ450.
thanks brother, watching your stuff as well. Great work Adam!
This things gonna be sweet, but make sure you put grease on the swingarm bolt because if not the bolt can seize the the sleeve in the engine and you won’t be able to get it out!!couldn't tell if you greased it or not though, love the vids
Thanks bro, i will 😉
OnTheGasFilms he doesn’t even have a swing arm yet, he will be taking it right back off.
Honestly it already looks sick rado
Thanks Anthony 😉
Can’t wait for the bike to be finished. Nd I love the music. It’s very relaxing
Thanks Raymond 😉
I like the shiny, new bolts you used! Matches the shiny new frame and motor! Really nice video!
Thanks Gabriel!
I can’t wait to see this finished Rado! I just brought a 2012 rmz450, this series will probably make me buy stuff I otherwise wouldn’t 😂😂
congrats, you got yourself pretty good bike ;)
Nice work Rado this bike will turn heads 😎👌
thanks brother, so will your rm125 ;)
Rado, the RMZ is going to Come out Awsome. Im really looking forward on it plus your YZ build Too!!!! Cant wait!👍
Thanks John, glad you like it! 😉
I learned something new at the bearings 💪😎👍
Sick build the neon color is a great touch!
thanks Christopher!
Wow! Looks great 👍🏽 I’m surprised you didn’t grease any of your bolts, particularly the swing arm pivot bolt and linkage bolts! They won’t come out easily next time for sure😬
i might go back and grease swing arm bolt better, it was little grease from the bearings that had been packed really well..
Awesome work man! Looking forward to seeing the finished product!! 👍✊👊✊👊✊
Thanks Nathan!
That torque wrench but was funny. 👍
where did you sent your parts to get hydro blasted?
Looking Great👌I can’t wait😊
thanks Timo!
Looking good Rado! Get that thing done and go rip up the track
Cant wait Mike!! 😉
I like how the chain guard/guide Color match with decal on the fork...as always..awesome video.👍👍👍🤘🤘🤘
thanks Nicholas!
Would love to have an impact gun with an accurate torque sensor built in so you could just run in the bolt and have it torqued in one step
As far as I know you do but good luck finding a cheap one
Great video, that's going to be a really sweet bike!
thanks Mike!
You are very welcome
169th.
Going to be an AWESOME bike!
FYI if you pack the bearing from the other side you will get a bigger volume of grease into it which should take less time. For future reference of course.. great bike build
thanks bro, good tip ;)
@@dirtniron where do you come from???
Awesome video! Love this kind of videos, keep it up!
Lookin sick !
thanks Trent!
Nice and fast good job man no messing about there bro
thanks bro!
Looks nice all ready💎
Thanks Petteri!
I wish I could built my own type of dirt bike.
Loving the build but have u checked a manual as there is normally a specific pattern to tightening engine mount bolts, usually starting with swingarm then bolts thru the engine then the ones thru the mounts and frame, all shud b snugged first then torqued in correct pattern to correctly align everything and make sure nothing binds, this is very important!!!! Thanks for showing!
Thanks, i will look into it, appreciate the advice Eric
@@dirtniron no problem, all about sharing knowledge and helping the community!!!
Aftermathmotomx & Aftermathmx approve this video
cool, thanks! ;)
Krásná práce. Ta bude lepší jak nová:)
Vdaka Lukas! :)
Liking this build!👍
thanks Joseph!
Its like a brand new dirt bike! Nice chassis, I have my 150ccsport motorcycle,I wish to change my frame and fork in a real dirt bike, ImFernado O. Galapin of Concepcion Uno, Marikina, Metro Manila, Philippines. just seeing your demo of assembling the dirtbike.
Looking amazing! Great job... :D
Thanks bro!
Looking Mint!
thanks Kolton!
Woww.! 🔥🔥🔥
Good content actually shows him working on the bike not just talking majority of the time witch is good
i like to talk ;)
Same quality as the ktm sx 300 2004. Great job
good jobs
Looks super sick👍 keep it up
thanks Shane, will do my best!
Definitely should have gotten a xtrinq triple clamp
One second: let me just tap into my inner Arnold and bear hug this 450 onto that stand over there! Boss status
hahah, inner Arnold! :) you are funny, Steven!
had to bear hug it twice, because I had to change camera angle for the shot :)
I enjoy watching your vids. Btw what is the engine called?
Because I'm trying to build my own for grade 11 :)
I love the details that you put in your videos thay are very entertaining and informative. No grease on swing arm bolt?
Thanks man, grease goes on, already took it out and greased. Same for the engine bolts. Learning as I go 😉
I could watch the full build in one piece with the music and love it the whole way. It is soo captivating.
Stay motovated.
Ps. Do you plan to re sell those tshirt?
thanks, glad you like it! Tshirt are available at my website, I have different designs as well: www.dirtniron.com/shop
I'm a bit young for asking this question
But is it possible to buy all the parts straight from the factory
And cut the amount you need to pay for a full bike?
Biuld the wall!
Keep us Mexicans out , we mix gas too fellas on our leaf blowers hahahahaha I ride mx aswell usually at milestone
When will you continue your assembling like watching the video hope to see the complete dirt bike?
there will be new video this weekend
@@dirtniron what is the title of the video?
Are you going to play with engine mounts mods (drilling for example) to get more flex from the chassis? It is said to be a game changing mod with these stiff rmz frames.
I didnt plan on doing it, havent heard much about it
Dirt N Iron pay some attention to the engine mounts on factory rmz 450. Their engine mounts quite thinner than stock to get flex. In UK some teams are drilling stock mounts to get the same for cheap. Actually, you can buy used engine mounts for 20-30$ just to try.
Holy loctite!
Love it
Nice video like this build
thanks!
It's so rare to find someone that can wrench ride and make bad ass videos. Keep up the good work. Subbed back when you were at 18k. Channel keeps growing.
thanks a lot Jake for very encouraging comment! I will do my best!
Nice work again. But I think you should use your wrist more and the impact driver less.
Ok 😉
dont you want to grease the swingarm axle to prevent it to get stuck ? Just like the wheel axels ?
Yes, i did it already. All the bolts, engine, swing arm and linkage.
Guess I missed it in the vid. Tought you just assambled it arter whiping it of with the rag 😂
There was little grease left but i went back after the video and re-greased all the bolts again.
Why not any grease on the swingarm axle bolt? Even if you applied a thing layer of anti seize or waterproof grease. 🤔
I will, there was some grease on from the swingarm bearing, they were over-packed.. but I am considering to pull it out and re-grease
@@dirtniron yeah but I would just put grease on the swingarm axle bolt. You don't want that to rust or anything like that.
Can you put a gear indicator incase you dont memorize the gears pattern?
?
Have you rebuilt a rmz250 4 stroke?
no, this 450 is my first rmz to build
Hey man, these motorcycles are pretty expensive her ein my country,i want to start a project a build mine, i have no clue at all,anyone knows any article that show sme what parts do i need ?
I need skrews for my gilera smt 50 2006 model what should i buy anyone know?
Forgot to grease the swing arm/engine bolt
Yes I forgot 😉
You should’ve just bought a bearing packer !
Yea, that would help 🙂
👍 you must be wrecked after all that Rado, keep up the good work buddy😉
Haha, just a bit 😉
Can someone link the stuff he used? THANKS
what exactly do you want to know?
Hi
😍💪🏻👌🏻👍
You just keep going how many bikes do you work on mate at 1 time I have 3 different projects but only can do 1 at a time keep it going bro god bless
I have 2 projects now but will start second one only after first one is done, so I do 1 at a time
Dirt N Iron sound mate can not believe you have replied thanks so much for the advice mate I will make sure I sort that out what camera and system do u use thanks again for answering me god bless and safe riding bro
Consider change the music please! please!!
Its hard to find a music that is free and people like it, plus i need to like it too. What would you like ?
🖒🖒🖒💪💪💪
*_Cant wait to see this bike finished!_*
Thanks brother, me too!