Thanks for a great video. My mother gave me one of these clocks just before she passed away. I've got the Holivar book and I'm keen to get the clock working. Your video will make a great reference.
I got a simple Linden quartz clock and have got it working but it chimes at 5min after and I was hoping to find directions for my clock… and while this isn’t that…I just wanted to say you do an amazing tutorial.
@@mherzog7I will try that. Also why do you think that it was running just fine and then the revolving bit just quit…I put in a new battery…to not much help.
0:21:30 when moving the pallet, try doing so gently, with a toothpick, maybe. You should be able to see it snap into place in each direction. This gives a visual indication that power from the spring is going to be transferred into the pendulum to keep it going.
What has worked for me is I will move the anchor pin to see if the pallet causes the escape wheel to move properly so the hands move. Once I have taken everything apart, cleaned, oiled and reassembled, it’s just a matter of making sure the suspension spring is in good condition and putting the clock in to beat.
0:18:20 Did you tighten the click screw? Otherwise, the click is likely to slip off again, probably some time while it is being wound, and the person winding it will have a very bad day.
@mherzog7 Well thanks to your excellent camera work I had a better view than you. I've had my clock for some 10 yrs and tried to repair the suspension several times. I think I can do it now thanks to your video I found a used copy of (the book of instructions) and I already have the spring. Thanks again.
the clock doesn't work because the pendulum doesn't make a turn of 270 degrees but it does more than that or I have the same miniature rotating pendulum clock Best regards RD
Are you talking about a clock of yours? There is no standard as to how far the pendulum rotates, some are greater than 360 degrees, some could be as little as 180 degrees.
Wonderful video - I always look forward to you posting a new vid. Was the original reason that the click was not engaging the ratchet wheel because the screw in the click had loosened up ?
I apologize if I couldn't respond sooner. in the video when you frame the oscillating suspension you can see when it turns to the right the click is much faster than when it oscillates to the left which is why I said that the watch wasn't working best regards RD
Nice video, That clock was made the same year I was!
Thanks for a great video. My mother gave me one of these clocks just before she passed away. I've got the Holivar book and I'm keen to get the clock working. Your video will make a great reference.
Thank you! Good luck with it.
I got a simple Linden quartz clock and have got it working but it chimes at 5min after and I was hoping to find directions for my clock… and while this isn’t that…I just wanted to say you do an amazing tutorial.
Thank you! You should be able to pop off the minute hand and reposition it.
@@mherzog7I will try that. Also why do you think that it was running just fine and then the revolving bit just quit…I put in a new battery…to not much help.
Another excellent video. I learned a lot! Thanks
Glad to hear it!
0:21:30 when moving the pallet, try doing so gently, with a toothpick, maybe. You should be able to see it snap into place in each direction. This gives a visual indication that power from the spring is going to be transferred into the pendulum to keep it going.
What has worked for me is I will move the anchor pin to see if the pallet causes the escape wheel to move properly so the hands move. Once I have taken everything apart, cleaned, oiled and reassembled, it’s just a matter of making sure the suspension spring is in good condition and putting the clock in to beat.
Yes, that is correct, I forgot to mention that once I had it apart I tightened it.
Great video!, thanks for info. Adrian
You are welcome!
0:18:20 Did you tighten the click screw? Otherwise, the click is likely to slip off again, probably some time while it is being wound, and the person winding it will have a very bad day.
I did. I just did not mention it.
29018 ???thanks nice video 29018 need to know more i am stuck... i got two dails with it and they both fit one porselin dail??
It looks as if the screw holding the clicker is loose.
Good eye! I realized that after I reassembled it, and on my own had to take it apart again to tighten the screw. Thanks for watching!
@mherzog7 Well thanks to your excellent camera work I had a better view than you. I've had my clock for some 10 yrs and tried to repair the suspension several times. I think I can do it now thanks to your video I found a used copy of (the book of instructions) and I already have the spring. Thanks again.
@@carsten4594Good luck!
Thanks!
the clock doesn't work because the pendulum doesn't make a turn of 270 degrees but it does more than that or I have the same miniature rotating pendulum clock
Best regards RD
Are you talking about a clock of yours? There is no standard as to how far the pendulum rotates, some are greater than 360 degrees, some could be as little as 180 degrees.
Wonderful video - I always look forward to you posting a new vid.
Was the original reason that the click was not engaging the ratchet wheel because the screw in the click had loosened up ?
I apologize if I couldn't respond sooner. in the video when you frame the oscillating suspension you can see when it turns to the right the click is much faster than when it oscillates to the left which is why I said that the watch wasn't working best regards RD
right, that shows just how much the clock was out of beat
Hard to say. Could be a tooth broke off from a gear in the motor, they are plastic. That’s all it takes. Keep playing around with it.