YOU CAN ALWAYS BUY 1.5M-1.7METERS PNP BUT......IF YOU ENJOY CONSTRUCTIONS,ELECTRIC OR INDIFFERENT,ARF WARBIRDS ARE THE BEST CHOICE! GREAT VID,GREAT FLIGHT! HAVE A NICE DAY! !
Looks like landing requires more of a round out than a flare. Looks great in the air and seems to fly just as good as it looks. Great review, thanks for sharing.
That’s fair. It took some practice to get the landings. She likes a touch of power all the way down to the ground and yeah as you say a round out. And if you can touch one wheel first it really helps with a smooth touchdown.
@@Thercgeek It wasn't a criticism, just an observation. I've got a 40% 330S that's the same way - fly it all the way down. These are great videos you provide and I appreciate the work you do to make them happen. Thanks, H
No worries man, I didn’t take it that way in any way. Was just adding to what you had stated which was right on. Thank you for your kind feedback, I appreciate you taking the time to watch.
@@Thercgeek The models you build/assemble and review are models we all aspire to own. These monstrosities I've been flying since the mid 1990's take much work and money to construct, more money and work to get them to the field, and, for me, constant stress of 'I hope I don't dumb thumb' during this flight. All I see is $'s in the air and a lot of the fun kind of goes by the wayside. I truly enjoy your channel and the models you review. H
Yeah, the airplane would handle that fine. I have a run am for that, but The problem for me is that I fly at a field on a military base, so no inflight video/pics are allowed.
Do you think they stretched the nose on it much? It looks like it a little, but I'm still trying to figure it out. Jugs are always nice flying models. Thanks for the super video! You did a bang up job on the repaint.
Do you happen to have experience with the FMS 1500 foam P-47? If so, how would you compare these two? For somebody with experience only with smaller (1100mm-ish) foam planes, looking to get into a 1500mm-ish P-47... This plane looks great, but would obviously cost a fair bit more to get flying, and I would also worry about the learning curve for repairing a balsa, covered plane etc... Thanks.
Unfortunately, I’ve not flown the fms 1500. I’ve heard good things about it. Compared to this, I’m guessing that the fms would fly a bit lighter. This one flies great, but tends to fly a little heavy.
Great review as per usual Chris. I have just got my hands on the Seagul Snafu version which I would assume is the exact same model. Thanks for the build tips. Did you get a reading on your current draw & wattage readings using the tomcat? I’m heading towards the redback 91 400kv. 👍
P47 Thunderbolt Great Plane far more rugged than the P51 but it just don't sound like an R2800 Double Wasp Radial does it? You'd think that there would be some way to simulate engine sounds with something that works like a goose or duck call disguised as a drop tank or a bomb. Just an Idea. Any sound engineers out there.
@@Thercgeek I've have several o them even had Mr. RC sounds very first prototype the 4 and the aspire. I possible a simple non electric wind driven mechanical device that looks like a drop tank or bomb would save weight and complexity and cost.
I was trying to figure out how I missed this. Great video. Oh yeah, last month it was posted. That’s when you had me blocked. Thanks for unblocking me. Great sounding plane!
@@Thercgeek Could’ve been my account. Or I doing that lightning prediction thing I do when I’m not flying, commenting on your videos, or bothering you by email.
@@Thercgeek Thanks man. I dig watching your videos! Looks like you might have modified the bomb stl file so that it prints in one piece. making the "fin" the hinge.
Thanks so much! I tried a few different things and ultimately the only mod I ended up making to the file was adding a slot for the bomb release on one half. The fins are designed as a single piece and I simply glued them onto the two bomb halves and that’s what acted as the hinge.
YOU CAN ALWAYS BUY 1.5M-1.7METERS PNP BUT......IF YOU ENJOY CONSTRUCTIONS,ELECTRIC OR INDIFFERENT,ARF WARBIRDS ARE THE BEST CHOICE! GREAT VID,GREAT FLIGHT! HAVE A NICE DAY! !
Such an incredible model. A home run from legend hobbies. Love the repaint and bomb drop you did!
Thanks man!
Nice P47 Looks great and Flys Fast , that I Like I'm going to have to get me one .
Looks like landing requires more of a round out than a flare. Looks great in the air and seems to fly just as good as it looks. Great review, thanks for sharing.
That’s fair. It took some practice to get the landings. She likes a touch of power all the way down to the ground and yeah as you say a round out. And if you can touch one wheel first it really helps with a smooth touchdown.
@@Thercgeek It wasn't a criticism, just an observation. I've got a 40% 330S that's the same way - fly it all the way down. These are great videos you provide and I appreciate the work you do to make them happen. Thanks, H
No worries man, I didn’t take it that way in any way. Was just adding to what you had stated which was right on. Thank you for your kind feedback, I appreciate you taking the time to watch.
@@Thercgeek The models you build/assemble and review are models we all aspire to own. These monstrosities I've been flying since the mid 1990's take much work and money to construct, more money and work to get them to the field, and, for me, constant stress of 'I hope I don't dumb thumb' during this flight. All I see is $'s in the air and a lot of the fun kind of goes by the wayside. I truly enjoy your channel and the models you review. H
Chris, you do such a great job on these videos. Thanks!
Thank you!
That sounded AWESOME! I just picked up the Banshee from Legend and really love it.....great folks over there.
Very cool! Thomas is a good guy and has a real passion for scale models. He has lots in the works, so will be fun to see what he comes up with! 😊
Very nice review Chris,this is a very nice P-7,thank you!
Thanks Don!
What is the name and where can I get that surface deflection gauge? 4:39
That particular one isn’t made anymore but I designed my own which is available here: www.thercgeek.com/product/Control-Surface-Deflection-Meter
Another awesome vid Chris
Love the printed bombs, she sounded and looked great 👍🏻
Nice job Chris🍸
Thank you!
Would it be possible to add a naked GoPro for in flight video capabilities?
Yeah, the airplane would handle that fine. I have a run am for that, but The problem for me is that I fly at a field on a military base, so no inflight video/pics are allowed.
Do you think they stretched the nose on it much? It looks like it a little, but I'm still trying to figure it out. Jugs are always nice flying models. Thanks for the super video! You did a bang up job on the repaint.
Thanks! I do think that they stretched the nose a touch, but not a ton. Certainly not to the point that it takes away from the looks.
Do you happen to have experience with the FMS 1500 foam P-47? If so, how would you compare these two? For somebody with experience only with smaller (1100mm-ish) foam planes, looking to get into a 1500mm-ish P-47... This plane looks great, but would obviously cost a fair bit more to get flying, and I would also worry about the learning curve for repairing a balsa, covered plane etc... Thanks.
Unfortunately, I’ve not flown the fms 1500. I’ve heard good things about it. Compared to this, I’m guessing that the fms would fly a bit lighter. This one flies great, but tends to fly a little heavy.
Great project. When are you doing the LEGEND T28?
Thanks! The T-28 is currently on the bench. First assembly vid will hopefully be ready in a few more weeks.
Great review as per usual Chris. I have just got my hands on the Seagul Snafu version which I would assume is the exact same model. Thanks for the build tips. Did you get a reading on your current draw & wattage readings using the tomcat? I’m heading towards the redback 91 400kv. 👍
I did take a reading, but I can’t remember what it was. It spec’d out really well when I measured it, I do remember that.
Im really looking forward to the skyrader
Me too!! She’s underway now, but not as far as I would have hoped by now. Goes together well and fairly quickly though. 😊
P47 Thunderbolt Great Plane far more rugged than the P51 but it just don't sound like an R2800 Double Wasp Radial does it? You'd think that there would be some way to simulate engine sounds with something that works like a goose or duck call disguised as a drop tank or a bomb. Just an Idea. Any sound engineers out there.
There are sound systems out there where you I talk speakers into the airframes. That’s the easiest and loudest way to do it.
@@Thercgeek I've have several o them even had Mr. RC sounds very first prototype the 4 and the aspire. I possible a simple non electric wind driven mechanical device that looks like a drop tank or bomb would save weight and complexity and cost.
Perfektes Modell 👍👍👍👍👍
I was trying to figure out how I missed this. Great video.
Oh yeah, last month it was posted. That’s when you had me blocked. Thanks for unblocking me. Great sounding plane!
Haha, thanks! For the record, I didn’t have you blocked at all. Not sure what was going on.
@@Thercgeek Could’ve been my account. Or I doing that lightning prediction thing I do when I’m not flying, commenting on your videos, or bothering you by email.
Yeah, who knows. I’m glad you’re here. 😊
Do you have a link to the 3D print file for the TPU bombs?
Just added it in the vid description. I thought I had it in there, but apparently not. Doh!
@@Thercgeek Thanks man. I dig watching your videos! Looks like you might have modified the bomb stl file so that it prints in one piece. making the "fin" the hinge.
Thanks so much! I tried a few different things and ultimately the only mod I ended up making to the file was adding a slot for the bomb release on one half. The fins are designed as a single piece and I simply glued them onto the two bomb halves and that’s what acted as the hinge.
Great video 👍
Thanks!
🤟🤟👍
I watched the funny and informative video well.
You have a good hobby, friend. !!!!
let's be friends.😊😊😊😊
친하게 지내봐요~
👍🦅
Pick me!! Pick me!!! I want that plane, Please