thanks so much for doing this . I like your reviews because you show and discuss any problems you may have in building every kit. you must have a big collection of models
RW, That's our reason to review a kit is to pass on the kits worthiness and help folks avoid trouble spots. Actually though, I don't have many - most are given away to youngsters! -Doug
Do any of you know if this kit is still available in the US? It doesn't seem to be on Revell's site, and I've only been able to find it in the UK for a heafty sum.
I love this build. I've got this exact kit, that I also plan on turning into B.J. & The Bear version. However, I also bought one of the other Revell K100 Aerodyne kits, which I'll be starting on soon. I noticed at the beginning of the video, where you've got the model revolving, that there's a pretty noticeable gap between the tops of the doors and the Aerodyne roof cap. Did you ever figure out what caused this? I'd really like to avoid this problem if possible. Thanks!
JJ, Good question, the answer is lack of test fitting. It was assumed that the doors would fit properly but they did not. To resolve the issue test fit those doors before the glue goes on and make any needed adjustments for a good fit! Thanks for watching and please subscribe if you haven't already, to help us continue our mission to inspire more modelers! -Doug
I love your work!! I don't want to sound like a negative Nancy. Just a little helpful information. I know colors are all creative license per builder. The engine block has 3 valve cover. That will be modeled after a Caterpillar engine. Those engines are actually caterpillar yellow from the factory.
Hi, my name is Malcolm, and I have a question for you.. question is, How can I make a 1/25 scale tri - axle lowboy trailer WIDER to about 110mm to 120mm wide, and LONGER by making it a 4 axle trailer.. If you have any ideas for me that would be greatly appreciated, cheers malcolm.
Malcolm, The short answer is - use two identical kits and cut the center sections out of one to get the dimensions you want for the larger one. Cut the one you want larger in the middle in both directions and add/glue those center sections to the recipient model. Use an axle/wheel set from the donor kit for the forth set and add a section to the center of each axle shaft to widen those the same amount and add longer axles. Reinforce the joins with sheet stock. PS, please help us reach more modelers by subscribing if you haven't done so already. -Doug
a p.s to your built- the "antenna" behind the cab and mounted to the frame is called a pogo stick and its use is to hang the air brake hoses and electrical cord so they don't get tangled up while the truck makes turns.
I'm glad I discovered your channel on my feed. For what seems like it would take me two months to build a model like this, you make it look easy and do it in hours. How much do you wrap up cost wise in doing a kit like this? I want to start building models again but I have a very limited income. Any suggestions would be greatly appreciated. Thank you and keep making great videos.
Turbo, Thanks and A kit like this one takes about 16 hours of work. Costs are rising but bargains are still to be found. AMT has been marketing semi cabs through Hobby Lobby and with their weekly discount coupon they can be had for around $30. Look for sales on spray paint and with a few accent paint bottles and a tube of glue you can get back into the hobby for very little.
Doug, do you know If the decals you used also make a set for the Friedenfels show truck? I need a new set of decals for the model but have been unable to find any. TY for any help.
TWM, Nope, I haven't built that one but I'll have to decline as I have 16 models and reviews already in the queue and it will take months to get to a new addition but thanks for the offer! -Doug
would love to see some user submitted versions of this... i am doing this now, but going down the road of weathering it... had trouble with the gas tanks not fitting, sigh... taking 3 weeks, still building the frame, the painting and weathering is tedious... one deviation we did, was to cut the rear fenders, after looking at some of BJ's trucks on line, we noticed they didn't cover the tires, unless my old eyes deceive me lol
Excellent work on this model! i've got mine, so I'd like to ask you can you tell me the correct RED color of Revell line paints for this? maybe number 31, 32?? there are so different red color,, i don't know what it's the correct before to buy. Thanks.
the only bad spot is the finger print smug on one of the upper windows,other that your where right about the decals covering up the bleed through of the paint
thanks for doing this i done the modes trailer. u done i aslso did b j. paint job was waiting. to see how u got itto gether i put a v8 Detroit. in mine with straight pipes an leds light. the old saying. chicken lights an chrome it will be at my next modle meeting my wife. did the mack u did a while back thanks an keep on trucking your friend eddie
very nice been waiting for amt to rerelease bj bear truck this way better ordered up some of those decals $10 not bad look like there good quality were they easy to work with thanx Tim
The decals are quite east to work But being Aftermarket they are FULL SHEET carrier and mist be cut close. Otherwise Modeltruckin decals are TOP NOTCH. I Used them on a few builds including this review and they are my GO -TO rig company.
Damn mine looks like crap compared to this one but not bad for only being 14 and these videos make me relize i need to put more effort into my kits and more details and to take my time
![เปิดใจ "อาจารย์เบียร์ คนตื่นธรรม" อดีตเคยสุดทุกทาง ถ้าใช้หนี้หมดไปบวชแน่ l [Nickynachat]](http://i.ytimg.com/vi/IxeE0xVhy08/mqdefault.jpg)
thanks so much for doing this .
I like your reviews because you show and discuss any problems you may have in building every kit.
you must have a big collection of models
RW, That's our reason to review a kit is to pass on the kits worthiness and help folks avoid trouble spots. Actually though, I don't have many - most are given away to youngsters! -Doug
Do subscriber giveaways
LPS, Well, there's some additional issues there plus additional cost but It's a thought I will consider! -Doug
Do any of you know if this kit is still available in the US? It doesn't seem to be on Revell's site, and I've only been able to find it in the UK for a heafty sum.
Great build. Loved the show as a kid :)
Thanks WH -Doug
I love this build. I've got this exact kit, that I also plan on turning into B.J. & The Bear version.
However, I also bought one of the other Revell K100 Aerodyne kits, which I'll be starting on soon.
I noticed at the beginning of the video, where you've got the model revolving, that there's a pretty noticeable gap between the tops of the doors and the Aerodyne roof cap.
Did you ever figure out what caused this? I'd really like to avoid this problem if possible.
Thanks!
JJ, Good question, the answer is lack of test fitting. It was assumed that the doors would fit properly but they did not. To resolve the issue test fit those doors before the glue goes on and make any needed adjustments for a good fit! Thanks for watching and please subscribe if you haven't already, to help us continue our mission to inspire more modelers! -Doug
I love your work!! I don't want to sound like a negative Nancy. Just a little helpful information. I know colors are all creative license per builder. The engine block has 3 valve cover. That will be modeled after a Caterpillar engine. Those engines are actually caterpillar yellow from the factory.
Joseph, Thanks for the info! PS, please subscribe if you haven't already to help us reach more modelers! -Doug
Used to watch BJ and the Bear growing up in the UK Doug ☺ Amazing build
😎
GP, wow, it got all the way across the pond, eh? Thanks. -Doug
Congratulations, I love this truck, and you just have done an amazing work ⭐️⭐️⭐️⭐️⭐️
Salv, thanks man! -Doug
Hi, my name is Malcolm, and I have a question for you.. question is, How can I make a 1/25 scale tri - axle lowboy trailer WIDER to about 110mm to 120mm wide, and LONGER by making it a 4 axle trailer.. If you have any ideas for me that would be greatly appreciated, cheers malcolm.
Malcolm, The short answer is - use two identical kits and cut the center sections out of one to get the dimensions you want for the larger one. Cut the one you want larger in the middle in both directions and add/glue those center sections to the recipient model. Use an axle/wheel set from the donor kit for the forth set and add a section to the center of each axle shaft to widen those the same amount and add longer axles. Reinforce the joins with sheet stock. PS, please help us reach more modelers by subscribing if you haven't done so already. -Doug
a p.s to your built- the "antenna" behind the cab and mounted to the frame is called a pogo stick and its use is to hang the air brake hoses and electrical cord so they don't get tangled up while the truck makes turns.
Cal, that is great information. Thanks for sharing! -Doug
I'm glad I discovered your channel on my feed. For what seems like it would take me two months to build a model like this, you make it look easy and do it in hours. How much do you wrap up cost wise in doing a kit like this? I want to start building models again but I have a very limited income. Any suggestions would be greatly appreciated. Thank you and keep making great videos.
Turbo, Thanks and A kit like this one takes about 16 hours of work. Costs are rising but bargains are still to be found. AMT has been marketing semi cabs through Hobby Lobby and with their weekly discount coupon they can be had for around $30. Look for sales on spray paint and with a few accent paint bottles and a tube of glue you can get back into the hobby for very little.
wow ilove this old builds.
Thanks MK, It's an oldie but a goody! PS, please subscribe if you haven't already to help us reach more modelers. -Doug
im building one of these at the moment and love ur review and build guide..really helpfull.thanx
M55, You're very welcome! -Doug
WOW ! Super Sharp Doug watched the show as a kid LOL !
CP, You're telling your age man! -Doug
That is an awesome kit! Using it myself to do a BJ and the Bear build!
That's cool Doc, have fun! PS, please subscribe if you haven't already to help us reach more modelers. -Doug
@@RightOnReplicas Will do!!
Wow Thanks for sharing brother gonna get this kit i jut picked up the 75 anniversary amt kit beautiful build keep up the awesome work
TS, thanks good buddy! -Doug
Doug, do you know If the decals you used also make a set for the Friedenfels show truck? I need a new set of decals for the model but have been unable to find any. TY for any help.
WH, I didn't notice but check with their website to be sure! -Doug
one o my alltime favorite trucks...wanna build more Semi's....kool build , thank you
'member when the 1st Aerodine came out...lol , watch'd BJ & The bear too
lol...another watch again....I do try also , To watch everyones model car build vids...Thanx Doug...Rocking onnn
...lol..Watch again , dream of building...Thanx Doug , havva good one
Robert
Ok, i have had a look and doesnt seem like you have built this one im talking about, it is the Suzuki RGV-T?
TWM, Nope, I haven't built that one but I'll have to decline as I have 16 models and reviews already in the queue and it will take months to get to a new addition but thanks for the offer! -Doug
in your reiew rou state that you can get decals for trucks kits on the internet, can you tell me wich sites you use as i cannot find any decals at all
RC, Just do an online search for "semi truck scale model decals" and you'll have plenty of choices to make! -Doug
But u do a great job on what u do u inspire me on my models .I need to show it to ur account
JP, thanks and build on! -Doug
would love to see some user submitted versions of this... i am doing this now, but going down the road of weathering it... had trouble with the gas tanks not fitting, sigh... taking 3 weeks, still building the frame, the painting and weathering is tedious... one deviation we did, was to cut the rear fenders, after looking at some of BJ's trucks on line, we noticed they didn't cover the tires, unless my old eyes deceive me lol
SK, I think that BJ's ride had a few mods like that! -Doug
Do you build model bikes? Because i have on that i have that you could build if wanted? How would i have to send it too you,
TWM, I may have already built one like it. Check out the playlist tab titled, "Motorcycle Model Kit Reviews" here at Right On Replica. Thanks! -Doug
Awesome! I'm working on this kit now! Yours looks fantastic! 😉👍
Pop, take your time and dry fit everything! -Doug
Nice looking build, thanks for the review! I'd like to get one to do just what you did here.
84, It's a hoot and an exciting paint scheme! -Doug
The build looks awesome !!!
Thanks DH! -Doug
Door hinges on these Revell kits are very fragile - I cut of the peg and hotmelt a metal peg in the hinge and trim to size.
F, that's a good tip! -Doug
Where do you get your custom decals and parts?
BD, Decals and aftermarket parts mostly come from online sources. The decals for this build came from "Modeltruckin's" website! -Doug
It looks like you had fit issues with mounting the cab to the frame I have that kit but never built it
WF, Yes, You will need to do some mock-ups to clear the stacks too! -Doug
Same kit AMT put out years ago? Nice build.
CS, Yes it is! -Doug
Excellent work on this model! i've got mine, so I'd like to ask you can you tell me the correct RED color of Revell line paints for this? maybe number 31, 32?? there are so different red color,, i don't know what it's the correct before to buy. Thanks.
PL, I'm not sure but do a search for the real cab's color which is "Vermillion Red" and choose the Testator's paint that is closest! Doug
Oh, thanks for the info! I didn't know that name, I'll check it!!
PL, Hope it helps! -Doug
Ok, thats fine also what country are you from?
TWM, We're based in the US. -Doug
What a lots of pieces, skill level 5 wowww.
WC, It's not for the novice. There's a lot of test fitting required and large decals. -Doug
I like your videos and instruction. I have the 352 Peterbilt cabover
AH, Thanks. Have you built it yet? -Doug
No it is still sealed new in box
AH, Well now you'll have a great guide to help you with that! -Doug
the only bad spot is the finger print smug on one of the upper windows,other that your where right about the decals covering up the bleed through of the paint
RW, Thanks Roger and those smudges will come off after assembly with a soft cloth! -Doug
That was actually just Elmers Glue I forgot to clean off...
Another great video! Thanks man.
No Problem, Neil! -Doug
thanks for doing this i done the modes trailer. u done i aslso did b j. paint job was waiting. to see how u got itto gether i put a v8 Detroit. in mine with straight pipes an leds light. the old saying. chicken lights an chrome it will be at my next modle meeting my wife. did the mack u did a while back thanks an keep on trucking your friend eddie
Ed, Way cool. Thanks for the info! -Doug
very nice been waiting for amt to rerelease bj bear truck this way better ordered up some of those decals $10 not bad look like there good quality were they easy to work with thanx Tim
The decals are quite east to work But being Aftermarket they are FULL SHEET carrier and mist be cut close. Otherwise Modeltruckin decals are TOP NOTCH. I Used them on a few builds including this review and they are my GO -TO rig company.
Damn mine looks like crap compared to this one but not bad for only being 14 and these videos make me relize i need to put more effort into my kits and more details and to take my time
076, You can't go wrong with that attitude! -Doug
Doug éo senhor quem constrói todas as réplicas do vosso canal irmão.
cool kit sir nice to see it
Thanks BigE! - Doug
Thanks Doug. great big rig.
Vaughn
SAW, Thanks Vaughn! - Doug
Ah ah que belleza...
Ah ah beautiful
Enrique, ¡Gracias por vernos! Por favor suscríbete a nuestro canal! -Doug
@@RightOnReplicas ya dijo suscriptor nuevo.
do you get paid to review and build these kit's
RW, I wish! It costs me money to buy and ship models for review! I do it to promote the hobby. -Doug
give me link to model pls
K, If you mean to buy; try eBay! -Doug
Don't drop the model when finished, like I did my last build. (Diamond Reo)
AH, I hate it when that happens! -Doug
I don't see many of the real cabover semis around anymore.
KR, Sad but true! -Doug
Thats not called antena base thats the base to the pogo stick.
DM, Thanks for the information and please subscribe if you aren't already, to help us reach more model builders! -Doug
Cummins engine, paint everything beige then paint exhaust manifold rust color.
CS, thanks for the paint tips! -Doug
@@RightOnReplicas And btw the BJ & Bear truck was powered by a detroit 8V-92
@@fredericia01 I was told it had a Cummins.
U forgot to paint on of the belts
JP, dang, I knew I was forgetting something! -Doug
Right On Replicas
Breaker 1-9......
RB, we put the hammer down on this kit good buddy! - Doug
Those dash decals are horrendous.
Rather paint it.
Crash, Thanks for the suggestion! PS, please help us reach more modelers by subscribing if you haven't done so already. -Doug