so so so so o helpful. as always :) I am using a kiln in a school and still need to figure out who what where. This was very helpful, especially with the cones & rings, I need to check it out and try to change or play with the temperature a bit. So thank you!
Thanks so much for these videos. I am thinking about buying a kiln but it's a bit daunting, you have really covered the info I have been searching for especially when it comes to size. So many dealers have been trying to talk me into getting a larger kiln but the 50 liter really seems quite ample.
Hello ! Thank you so much for your videos. They are "shorts" yet very informatives ! I just installed my first kiln at home (I live in France) and I am so excited to start my first firing. Looking forward to test out all the tips and tricks you gave on your videos. Have a lovely day.
At the studios I've taken classes at, nobody talks in terms of temperature, and even the bags of clay have a cone-range to fire to, not a temperature. So I was a bit surprised to see temperatures, not cones, on that bag of clay. [Ich bin Amerikaner, aber kann Deutsch.] When I glaze-fire, I actually slow down my ramp between about 450°C and 700°C. There's a phase-transition in the 500°-700°C region that causes a change in thermal expansion, and being a bit paranoid about causing cracks, I like to move through that transition more slowly. I also like to "soak" at the target-cone for about twice as long as recommended [but my kiln is a small hobby kiln that runs off of standard US 120V/15A, so…], and I use a programmed cool-down _sometimes._
Thanks for the helpful video! I was wondering if the kiln program is alteady preprogrammed on the Rhode tablet on the side (so i just pick a programm and the max temp) or do i need to decide and set up all the phases one by one? If so how to decide what temp and how fast?
Hi Mia, very nice and interesting video, thanks 🙏🏻 Just a quick question: how long does it take to dry bisque up after applying glaze? When you start firing a glazed piece, does it have to be fully dry (let’s say, I.e., a couple of hours, a couple of days or what)? I live in Rome, assuming a room temperature of about 17º in this time of the year , low humidity. Thanks in advance 🙏🏻 And btw…happy new year 🍾🥂🎊
Hi, hope you can help me, I am a beginner, and my glazed pots haven’t got glazed properly, as I used brush on glaze requiring different temperatures. Some have been glazed some not. I think I didn’t understand the remote properly. So stopped it at 1093c, so it may have needed it longer. Is there anything I can do please? Thank you
I am brand new to ceramic.. I was wondering, when you say “glaze liquefies” does it start running down the sides or inside of a piece? Do you have to worry about it making a puddle say in a pot? Thank you.
Chips are beaking off of the bottoms of my stoneware pieces in cone 6 glaze firings. In my internet research I have seen pictures of this phenomenon and it is being called “plucking”. Are you familiar with the causes and more importantly any remedy? The conversations on the Internet immediately go to preventing glaze drips sticking to a kiln shelf, which is not my problem. To clarify, this is not a glaze problem and the stoneware chips are not sticking to the kiln shelf either. Any advice would be super appreciated! Thank you!
Yes that's plucking! I believe it comes from overfiring, but I'm not totally sure. I haven't had this problem luckily. If you're on facebook, I would ask in Clay Buddies or Pottery Heads group. Lots of potters there with amazing knowledge! They can help you :)
Hello , how long does your full glaze firing take? My new nabertherm 45l kiln has a programmed setting for glaze firing (earthenware) but it says it takes 3hr 20 mins but this is a lot less time than many sources say online for a glaze firing. It’s says it goes 0-300 c in 180 mins , then segment 2 is 300- 1050c for 20 mins. Is this too short a time to fire glaze for earthenware or does this sound ok?
Hello! Thanks for sharing your knowledge! It's been super useful! I have a couples of questions: I've been told that I can bisque fire Earthenware and stoneware together as long as I respect the temperatures. The ones I have are Earthenware (1000 - 1180 C) and Stoneware (1000 - 1280 C). So I was thinking of firing both together at 1000 C. Would be this OK? And If so, can I glazed them both with earthenware glazing and fire together? The reason why I am using earthenware glaze is because I have Christmas ornaments and beads glazed both sides (I will using stands for the kiln). If you could please help with this that would be amazing! Thanks!
So, the short answer is yes and yes. There is no problem bisquing the two together. I usually bisque at 900C (I am guessing the 1000 refers to the final temp). You CAN put your stoneware pots in a high-fire without any disasters. They just won't likely be vitrified (won't be waterproof and might be a little brittle)-- for ornaments and such, it should be fine. I wouldn't do that for tableware. Just don't do it the other way around- put your earthenware pots in a stoneware fire--they will melt 🙃
I buy them from my local ceramic supplier here in Germany. I’m not sure about their availability elsewhere. I like them because they take up less space than cones! But if you cant find the rings, cones function just as well.
Not too hot! Because it gets mixed with the clean air so it cools down quickly through the tube. It’s hot right at the kiln outlet though! (will burn you)
Hello, thanks for the video. When do you close up the air supply and put in the exhaust sealing plugs on a glaze firing. Also when you cool the kiln , when do you open the vent and take out the plug? Thanks
Thank you so much for this video, I've just done my first glaze firing following your instructions and it was a total success 👍😁 I'm over the moon!🙏🙏🙏
so so so so o helpful. as always :) I am using a kiln in a school and still need to figure out who what where. This was very helpful, especially with the cones & rings, I need to check it out and try to change or play with the temperature a bit. So thank you!
Thanks so much for these videos. I am thinking about buying a kiln but it's a bit daunting, you have really covered the info I have been searching for especially when it comes to size. So many dealers have been trying to talk me into getting a larger kiln but the 50 liter really seems quite ample.
Thank you Mia for this. Can you please tell me how you read the ‘cone’ ring ?Does it change colour or form depending on the heat/ time exposed to?
Hello ! Thank you so much for your videos. They are "shorts" yet very informatives ! I just installed my first kiln at home (I live in France) and I am so excited to start my first firing. Looking forward to test out all the tips and tricks you gave on your videos. Have a lovely day.
thanks for the lovely message!
Thank you for making your knowledge available to everyone 💜
At the studios I've taken classes at, nobody talks in terms of temperature, and even the bags of clay have a cone-range to fire to, not a temperature. So I was a bit surprised to see temperatures, not cones, on that bag of clay. [Ich bin Amerikaner, aber kann Deutsch.]
When I glaze-fire, I actually slow down my ramp between about 450°C and 700°C. There's a phase-transition in the 500°-700°C region that causes a change in thermal expansion, and being a bit paranoid about causing cracks, I like to move through that transition more slowly. I also like to "soak" at the target-cone for about twice as long as recommended [but my kiln is a small hobby kiln that runs off of standard US 120V/15A, so…], and I use a programmed cool-down _sometimes._
thank you very much, this was very helpful! 🤗
Do you fire the underglaze first, then coat with a glaze second? I’m new to this process.
Thanks for the helpful video! I was wondering if the kiln program is alteady preprogrammed on the Rhode tablet on the side (so i just pick a programm and the max temp) or do i need to decide and set up all the phases one by one? If so how to decide what temp and how fast?
Those spacers to create more height … what are they called … great videi
Stilts I think!? Any ceramic material suppliers should have them.
Thank you. Very helpful video
How long does it take to cool down?
Hello☺️ during glaze firing, when do I need to close the peepholes?is it when it reaches a certain temperature? 🥰
another great great video :) what cone does the kiln reach?
Hi Mia, very nice and interesting video, thanks 🙏🏻
Just a quick question: how long does it take to dry bisque up after applying glaze? When you start firing a glazed piece, does it have to be fully dry (let’s say, I.e., a couple of hours, a couple of days or what)?
I live in Rome, assuming a room temperature of about 17º in this time of the year , low humidity.
Thanks in advance 🙏🏻
And btw…happy new year 🍾🥂🎊
Hmm, interesting your firing program if fire an earthenware, it will be helpfull!
For earthenware, just adjust the final temp! I would use 1080 C. The rest of the program is the same 🙌
Hi, hope you can help me, I am a beginner, and my glazed pots haven’t got glazed properly, as I used brush on glaze requiring different temperatures. Some have been glazed some not. I think I didn’t understand the remote properly. So stopped it at 1093c, so it may have needed it longer. Is there anything I can do please? Thank you
I have question I appreciate if you could answer , should we leave poke hole open during firing since my mini kiln have only one ?
I am brand new to ceramic.. I was wondering, when you say “glaze liquefies” does it start running down the sides or inside of a piece? Do you have to worry about it making a puddle say in a pot?
Thank you.
Chips are beaking off of the bottoms of my stoneware pieces in cone 6 glaze firings. In my internet research I have seen pictures of this phenomenon and it is being called “plucking”. Are you familiar with the causes and more importantly any remedy? The conversations on the Internet immediately go to preventing glaze drips sticking to a kiln shelf, which is not my problem. To clarify, this is not a glaze problem and the stoneware chips are not sticking to the kiln shelf either. Any advice would be super appreciated! Thank you!
Yes that's plucking! I believe it comes from overfiring, but I'm not totally sure. I haven't had this problem luckily. If you're on facebook, I would ask in Clay Buddies or Pottery Heads group. Lots of potters there with amazing knowledge! They can help you :)
Do you let Air into the kiln in the begining of the firing?
How about glazing a plate? Wont we dip a plate in glaze totally and that sits in kiln and wont it drip?
can i use acrylic paint then glaze fired to kiln?
YOU RULE!!!!
What is the price of your kiln?
Is that a nichrome wire ?
Hello , how long does your full glaze firing take? My new nabertherm 45l kiln has a programmed setting for glaze firing (earthenware) but it says it takes 3hr 20 mins but this is a lot less time than many sources say online for a glaze firing. It’s says it goes 0-300 c in 180 mins , then segment 2 is 300- 1050c for 20 mins. Is this too short a time to fire glaze for earthenware or does this sound ok?
Hello! Thank you for your detailed and motivating videos. I would like to order a mug but do you ship to the US? Thank you!
send me an email with your address so I can calculate shipping and I will get it to you :) mia@potterytothepeople.com
Hello! Thanks for sharing your knowledge! It's been super useful! I have a couples of questions:
I've been told that I can bisque fire Earthenware and stoneware together as long as I respect the temperatures. The ones I have are Earthenware (1000 - 1180 C) and Stoneware (1000 - 1280 C). So I was thinking of firing both together at 1000 C. Would be this OK?
And If so, can I glazed them both with earthenware glazing and fire together?
The reason why I am using earthenware glaze is because I have Christmas ornaments and beads glazed both sides (I will using stands for the kiln).
If you could please help with this that would be amazing! Thanks!
So, the short answer is yes and yes. There is no problem bisquing the two together. I usually bisque at 900C (I am guessing the 1000 refers to the final temp). You CAN put your stoneware pots in a high-fire without any disasters. They just won't likely be vitrified (won't be waterproof and might be a little brittle)-- for ornaments and such, it should be fine. I wouldn't do that for tableware. Just don't do it the other way around- put your earthenware pots in a stoneware fire--they will melt 🙃
Where do you buy these rings? What are their advantages over the cones?
I buy them from my local ceramic supplier here in Germany. I’m not sure about their availability elsewhere. I like them because they take up less space than cones! But if you cant find the rings, cones function just as well.
@@PotterytothePeople I did find them at CJ, thank you. More expensive than cones, though, but versatile as useful across several cones.
How hot are the "exhaust" gases that come out?
Not too hot! Because it gets mixed with the clean air so it cools down quickly through the tube. It’s hot right at the kiln outlet though! (will burn you)
@@PotterytothePeople Great, thanks!
What do you do if glaze runs/sticks on the shelf?
You can use an angle grinder to slowly grind the glaze off. Then you need to reapply kilm shelf wash
Kiln wash on the shelves will also help drips come off easier.
Hello, thanks for the video. When do you close up the air supply and put in the exhaust sealing plugs on a glaze firing. Also when you cool the kiln , when do you open the vent and take out the plug? Thanks
너무 좋아요~
Yeah, I’ve never seen or heard or heard of them either!
How do they fire huge pots . Pots about the size of your kiln
In bigger kilns! 🙃
Bigger kiln video please and thank you
Not everyone has such big kilns 😅😂
Can you please do one for earthenware clay?🥰
it’s the same process just a lower temp! ❤️
Pottery at home but need a kiln 🥹
She has a video on options for renting kilns 💖