Way to post a video without any indication of how to actually get the part we all seem to need..leaving it entirely on us to just “make an educated guess and hope for the best… and or grow to want to claw our faces off from the sheer amount of time and research trying to find an official spec chest with then mb pertinent info smh this is the worst. Zed axis Lead screw bending itself to the point of failing every print, every time.. …so again…thanks for video. Gd to knw if find what I need I’ll have a video to stare at.
I'd also be interested in purchasing a new screw motor - mine somehow got resin in it and needs to be replaced. If there's a link to one anywhere, I'd be eternally greatful!
@@SCREWBY92 I was able to get one by contacting customer service with a video (the first one they sent was warped so i was sent another as well). still not sure where to buy them.
I think its a Nema 17 ..(just the size), the rod its 8mm (i think) , the motor its a big one compare to for example x motor of ender 3,its more similar to the z motor ,so its can handle more current /torque ...but i dont have the spec (i have the mono x, ender3, cr10))
Thanks for the video, its help me a lot , my Mono X have a problem, and the damper was broken, i replaced succeful with another damper , now im printing again. Alway chek that your print stop when homing, my Mono x came with the plastic z stoper blend and loose, when i nade the first levelin, dont stop and that pice broke, and the damper that hold the z motor broke.Thats why all my first print came "cut", the i saw that the z rodo.moves up and down, so i opened the printer and find the true: damper was broken, and the motor was free to move up and down.
Thanks for the video, its help me a lot , my Mono X have a problem, and the damper was broken, i replaced succeful with another damper , now im printing again. Alway chek that your printer platform stop when homing, my Mono x came with the plastic z stoper( that black pice that block the optical sensor) blend and loose, when i made the first leveling, dont stop and that pice broke, and the damper that hold the z motor broke.Thats why all my first print came "cut" in the firs layer, i saw that the z rod moves up and down, so i opened the printer and find the true: damper was broken, and the motor was free to move up and down. Now im fix it
I need a new motor, same thing as Grumpy Allison, motor got resin just after 2 months of use and Anycubic will not replace it, even though its a great idea with a very bad design, they design it with no protection from spills (BAD IDEA). Do anyone know where I can get a replacement motor?
![เปิดบ้าน พี่ตูน Bodyslam หลังใหม่คนแรก ที่ภูเก็ต l [Nickynachat]](http://i.ytimg.com/vi/flFwcmyDQSk/mqdefault.jpg)
I run 12 of the little guys and this video was a huge help wehen my stepper motor got loose. Thank you.
Way to post a video without any indication of how to actually get the part we all seem to need..leaving it entirely on us to just “make an educated guess and hope for the best… and or grow to want to claw our faces off from the sheer amount of time and research trying to find an official spec chest with then mb pertinent info smh this is the worst. Zed axis Lead screw bending itself to the point of failing every print, every time..
…so again…thanks for video. Gd to knw if find what I need I’ll have a video to stare at.
I'd also be interested in purchasing a new screw motor - mine somehow got resin in it and needs to be replaced. If there's a link to one anywhere, I'd be eternally greatful!
Same. Also, how would you remove the Z screw for the new motor? i don't know how to change that out
I too got resin in my motor and its seized. Were you able to find out where to buy a new motor?
@@SCREWBY92 I was able to get one by contacting customer service with a video (the first one they sent was warped so i was sent another as well). still not sure where to buy them.
@@weskennedy1825 i don't think you do with this assembly - it's permanently attached in.
Разобрал шаговый двигатель, в него попала смола. Поменял 2 подшипника 688z (16x8x5) все заработало
Nicely made video, still think it's unfortunate that the stepper drivers are not replacable since they make the machine super loud
Where do we buy a replacement screw motor?
Thats the joke, I looking but I dont find anything
gracias. estoy feliz con mi impresora y con su calidad
Where can i buy this motor? I need one
Thank you for making this video.
What NEMA motor model is used on the photon mono???
I think its a Nema 17 ..(just the size), the rod its 8mm (i think) , the motor its a big one compare to for example x motor of ender 3,its more similar to the z motor ,so its can handle more current /torque ...but i dont have the spec (i have the mono x, ender3, cr10))
Thanks for the video, its help me a lot , my Mono X have a problem, and the damper was broken, i replaced succeful with another damper , now im printing again.
Alway chek that your print stop when homing, my Mono x came with the plastic z stoper blend and loose, when i nade the first levelin, dont stop and that pice broke, and the damper that hold the z motor broke.Thats why all my first print came "cut", the i saw that the z rodo.moves up and down, so i opened the printer and find the true: damper was broken, and the motor was free to move up and down.
Thanks for the video, its help me a lot , my Mono X have a problem, and the damper was broken, i replaced succeful with another damper , now im printing again.
Alway chek that your printer platform stop when homing, my Mono x came with the plastic z stoper( that black pice that block the optical sensor) blend and loose, when i made the first leveling, dont stop and that pice broke, and the damper that hold the z motor broke.Thats why all my first print came "cut" in the firs layer, i saw that the z rod moves up and down, so i opened the printer and find the true: damper was broken, and the motor was free to move up and down.
Now im fix it
Hey where did you buy new damper?
I need a new motor, same thing as Grumpy Allison, motor got resin just after 2 months of use and Anycubic will not replace it, even though its a great idea with a very bad design, they design it with no protection from spills (BAD IDEA). Do anyone know where I can get a replacement motor?
Can we have specifications of the stepper motor as in angle and full dimensions also voltages and amps for the 6k mono please.
anycubic should provide you a new one for free if you contact their customer support
Can you please tell me where I can order the new motor from?
is the stepper motor interchangeable between the se and the x?
Where can I buy the screw motor for a Anycubic photon mono X?
Have you found where to buy the motor? Mine got screwed only after a couple of months of use
Where can I buy a replacement screw motor?