CLASSIC 1972 VW SUPER BEETLE. RE-WIRE START TO FINISH PART 3. ( IGNITION SWITCH.

This video gives a in depth video on the ignition switch for a 1972 super beetle. I explain every wire individually. There is 5 main wires. This is a long video. If i can do this, i know you can. We will be using the Bently service manual in this ongoing electrical series
THE 5 WIRES WE WILL BE FOCUSING ON IN THE VIDEO WILL BE THE FOLLOWING:
RED/ WITH BLACK STRIPE ( 50 ) SWITCH TO SINGLE WIRE CONNECTOR
SOLID BLACK WIRE ( 15 ) SWITCH TO FRONT OF FUSE 11
SOLID RED WIRE ( 30 ) SWITCH TO FRONT OF FUSE 8
BLACK WITH YELLOW STRIPE ( X ) SWITCH TO FRONT OF FUSE 10
GRAY WITH BLACK STRIPE ( SU ) SWITCH TO SINGLE WIRE CONNECTOR
** RED WITH BLACK STRIPE WIRE ( 50 ) GOES INTO A SINGLE WIRE CONNECTOR. THE OTHER SIDE OF CONNECTOR IS A SOLID RED LEADING TO THE REGULATOR.
** GRAY WITH BLACK STRIPE GOES INTO A SINGLE WIRE CONNECTOR, THE OTHER SIDE OF THE WIRE LEADS INTO THE DOOR JAM ( DOOR SWITCH ).
HOPE ALL THESE NOTES HELP. IF YOU HAVE ANY QUESTIONS COMMENT BELOW.
LEDGER:
T1 = SINGLE WIRE CONNECTOR
V = WINDSHIELD WIPER MOTOR
D = IGNITION / STARTER SWITCH
E = WIPER LEVER
E1 = LIGHT SWITCH
E2 = TURN SIGNAL LEVER
The following is a conversion from MM to AWG :
.5 MM converts to 22 gauge
1.0 MM converts to 18 gauge
1.5 MM converts to 16 gauge
2.5 MM converts to 14 gauge
4.0 MM converts to 12 gauge
6.0 MM converts to 10 gauge
FUSES: ( 12 TOTAL )
10 WHITE ( 8 AMP )
2 RED ( 16 AMP )
Stay tuned for further in dept videos on the 1972 Super Beetle .
Thank you for watching.
LIKE, COMMENT, SUBSCRIBE. RING THE BELL TO GET NOTIFIED WHEN THE NEXT VIDEO IS POSTED.