I LOVE large scale RC cars! That is a really nice piece of custom fabrication. Excellent first run! I can see that this car has a lot of potential. Given time, you can get all of that potential out of it.
Neat work, but what always surprises me with these builds is that nobody every builds in a differential! That solid rear axle does nothing to stop the vehicle from spinning out all the time!
scott mann when he went over and clicked the thing down after reving it. He actually put the transmission into first gear. It has four. Don't know why he used first only. This motor is very common in Chinese pit bikes
yeah he could used a 20kg rc servo on a third channel to manually switch the gear. Or he could switch it into third gear, and drive around with that. However the extra servo option is better..:-)
Nice Project! I also do have a tipp for you how to not have the front wheels slide in corners.. the attachment points from the steering rods at the wheels have to be in an triange with the middle of the back axis and the 2 turning axis of the front wheels(the vertical ones)! Then the inner wheel turns more then the outer since the inner turning cycle is a smaller then the outer turning cycle!
I don't understand the first 2:30, I can only speak English, my bad, but when it runs....it sounds great, and I want that muffler ( or lack of ) on my 30cc Yak, that backfire on overrun is AWESOME.....I LOVE IT !!! It does look like it's got TOO MUCH power though, it ground loops very quickly, maybe on big chunky tires and loose sand or dirt, it might be OK, but still a handful..........of fun
![แฟนแนวใด๋ - ยูริ โตเกียวมิวสิค [OFFICIAL MUSIC VIDEO ]](http://i.ytimg.com/vi/4_XVMuhhbsU/mqdefault.jpg)
![[Watch Party] APL 2024 Bacon Time Vs Hong Kong Attitude ชนะเข้ารอบ](http://i.ytimg.com/vi/ikUfW81sDaw/mqdefault.jpg)
Excellent build! I really admire your design and the quality of the fabrication.
I will admit it does look a bit cab forward but a lot of futuristic vehicles do as well. The workmanship on this is amazing. Very well done Sir.
I LOVE large scale RC cars! That is a really nice piece of custom fabrication. Excellent first run! I can see that this car has a lot of potential. Given time, you can get all of that potential out of it.
Alot better than most home made rc cars
the sound blew me away ... jaw droppin
Looks like you assembled from a kit clean and professional hats off!!
Its beautiful, nice work!
Svaka Cast Ante Legendo, skonto sam po Dialektu da si sa nasih Krajeva, samo Napred, Zivio
that's a sick rc car bro. Looks indestructible
Fabulous work! 👍👍😁👍👍
By the looks of it it looks like a quad without a seat, body panels, and handlebars
Robert Lizardi its exactly that but with go-kart wheels and rc gear
IT'S COMPLETELY CUSTOM.
Stu West NO idiot ! 🙄
The sound is just great. Great. Oh yeah... Thanks for sharing and greetings from Slovenia, Pilot Robert
That is nice and quiet. I would get 10-15 minutes play time before the cops show up to hand me a stack of tickets.
That truck is awesome . Just needs some LED's and a spoiler and it would be awesome. Nice truck.
Best music!👌🔊💞💞💞💞💞💞💞💞💞💞💞💞💞💞💞💞💞💞💞💕💕💕💕💕💕💕💕💞💞💞💞💞💞
awesome build!
sweet! very clean build
Nice piece of RC engineering. Cool project and you have the absolute coolest accent on TH-cam. Good job and nice video.
The Sound is very nice👍👍👍
вот это дело
уровень уже
хоть какоето совершенство получили
всё надёжно, мощно, капитально
и ломаться не будет, как пластиковые модели 1\5
молодцы!!!
Very nice job. Respect for the engeneering
Looks good quality build.
That shocks is crazy man wow looks like a 2500dollar build nice car
Nice work!
very nice work, lads.
cool idea to use the servo for two jobs,brakes and accelerate
Dude...That is BADASS!! Was just looking at those little 4 wheelers for my friends little girl.EXCELLENT job with the steering!!!
what would also be really cool
is add the quad plastics
back on it
and get a lil doll or mini
rider with racing suit
and Helmet..
cya
W3BZ
Sweet job. Looks great
very nice one, it's look very solid and elaborated...
Looks great !
Looks like the thing understeers a bit...very cool!
Clamp a small bucket seat onto it and take your niece/nephew for a ride = ultimate uncle status!
svaka cast profesore
BEAUTIFUL👍
Neat work, but what always surprises me with these builds is that nobody every builds in a differential! That solid rear axle does nothing to stop the vehicle from spinning out all the time!
I'm quite impressed fellas. Nice work
Brilliant!
Cool machine!!!!
that backfire is great!
Very cool, very good job👍
Nice build. At that scale it should have an FPV cam.
now that's sounds perfect
Great job guys :-)
That is awesome 😎 well done
Sounds like a dirt bike ☺️🤤✌️
It sounds so cool!!
Wow! That is one awesome RC car.
Put on a seat, foot pegs, some oh sh!t grab handles and hop on it, lol. Really cool build!
Super cool and clean! Good job on the build 👌🏿
This is very well put together! One question: why the complicated custom steering drive instead of just using a big servo?
Very cool, good job! ... Can you give it a longer gear ratio? Or maybe fit a working gearbox? ☺
scott mann when he went over and clicked the thing down after reving it. He actually put the transmission into first gear. It has four. Don't know why he used first only. This motor is very common in Chinese pit bikes
yeah he could used a 20kg rc servo on a third channel to manually switch the gear. Or he could switch it into third gear, and drive around with that. However the extra servo option is better..:-)
Good job !
awsome work dude
Very cool!
That's awesome . great job guys. Love it
She's a beauty
looks like its made from a pocket bike -- nice job
this is soooo sick!! woot
Awesome vids I love that sound. Thanks
Good job!!!!!
wow incredible very nice bro
That's awesome!
Little bit bigger and u could give ur friends rides...!!!! good job much love from Seattle WA!!
It looks like it's backwards.
Miguel Colon how wtf?
no its manuel transmission so its just the 1se gear
I was thinking the same thing the roll cage should be in the back
Sebastian Nava the body looks like it's on backwards idiot
Looks more like a small truck
Awesome guys!!! Man that thing is killer. Great job. Big thumbs up from me and subbed to stay tuned in.. :)
Wow, that looks awesome!! How long did it take you to build that 1/6th scale RC Car? That motor sounds sick!! Have you done a speed test on that yet??
I like it!
It would be awesome to see a third channel setup that could operate the shifter!
Woowoo very nice
cvt motor and muffler!!! so cool man
😁 very cool lads ✌👊
wiper motor for a steering servo! you are a genius! love the video
Just needs a seat :) Awesome work!
Nice!! 😎👍
Super 👍👍👍👍😁
nice work guys, awesome
Super...
And really cool rc
Next engineering mod is the shifting mechanism lol
its cool and i appreciate the effort gone into building something like that, but i wouldn't ever want one personally.
Nice Project! I also do have a tipp for you how to not have the front wheels slide in corners.. the attachment points from the steering rods at the wheels have to be in an triange with the middle of the back axis and the 2 turning axis of the front wheels(the vertical ones)! Then the inner wheel turns more then the outer since the inner turning cycle is a smaller then the outer turning cycle!
better said: they need to be on the line betwheen the middle axis point and the front steering axis:)
Nice Job...
Good job
Nice job😃
omg so awesome dude
svaka čast!
Beautiful
NICE!!! 🐴🍻
this is so many levels of awesome
Very cool
Awesome
Cool ! :-)
Man nice work
WooooooooooooooooooooooW
I don't understand the first 2:30, I can only speak English, my bad, but when it runs....it sounds great, and I want that muffler ( or lack of ) on my 30cc Yak, that backfire on overrun is AWESOME.....I LOVE IT !!!
It does look like it's got TOO MUCH power though, it ground loops very quickly, maybe on big chunky tires and loose sand or dirt, it might be OK, but still a handful..........of fun
Take it off some cool jumps
Genius !
nice congrats
Very smart lads you are but how are u going to use the rest of the gears on the motorcycle engine?
Nice build! I’d love to know more about your wiper motor steering conversion.