Thanks for the 3 minutes of barking dog. Just worked outside for 2 hours on my car and had to listen to barking dogs because the neighbors around here suck, now this. Fucking just what I needed.
BRO !!!!! I have that same quad and thought to do the same thing, what did you use for servos ? definitely doing this lol but I wanna mount a pick up body on it.
wouldn't it be possible with a 1:5th scale servo? i know that depending on what transmitter you have, you can set up a 2-way switch to make the servo go one way a little bit, and back to neutral. if you make it go down for one way on the switch, and up for the other, you should be able to shift gears. as for the servo on the quad, it shouldn't be any problem to figure out a link between the existing gearchanger, and the servo =)
Springs are too hard, they need to be drastically softer without a rider on. i discovered this when i converted a mini quad to rc, the stock springs might as well be bricks without a riders weight but 7mm thickness to 4mm springs changes everything and stops the bouncing. dont know what the spring thickness is on those quads but a similar reduction would make a huge difference
Steve Fox no I chopped up the a arms and made them longer. Made the quad like 8-10 inches wider and softened up the suspension. There’s videos on here about it
i have this idea for years, only no time and money. Anyway, you should try to change the gear, like a tooth or 2 more at the engine, or a few less at the rear. because it can go alot faster now that it doesn't have to carry the weight of a grown up. Also try to find some weaker springs, because these ones are way to hard for the same reason, so weaker ones wil give it a much better handling. And how about a body from a per perego ride on jeep? Because that's the best looking scale body imo.
ah. i see. and after some calculating, it see it would land around 470USD for a new radio+engine. but it isn't the biggest money, compared to buying a Losi 5t LOL
reverse would be easy but the motor dont have it would need a new engine and different radio would cost an easy 500 bucks to do just dont feel like putting that much money into it already got over 2000 in it nah mean lol
L truely can't figure out why all these people are bitching about the dog, if you don't like it don't fuckin watch, its pretty simple solution. I got say I thought it was a pretty sweet toy, and I'm guessing that with a charging system, the only thing thats needed is gas and a remote?
what gear do you drive on? i had a similiar one, 3 gears+reverse. ran on second mostly. would be cool to make a system so you can change gear with a 3 position switch on the transmitter =)
Thanks for the 3 minutes of barking dog. Just worked outside for 2 hours on my car and had to listen to barking dogs because the neighbors around here suck, now this. Fucking just what I needed.
Then dont watch the video you act like you had too. You sound like a whiny bitch
ZOMBIEkid052303 ho ho ho
I'm just saying it could have been better.
And yeah, my channel does suck, but I never really got in to the youtube game to be a publisher. I only tried it on for a while.
Dylan Foeller man dont talk down about your self most this haters dont do shit on there channel
Hello,
Can you give details of what motors you have used to control the steering ??
i would like to make one for myself too. !!
LOL, that is hilarious. I'm building one of these, when I can't take my dogs for a walk myself anymore......
The koolest dog toy in town
Now this is cool! What servo are you using to control the throttle and steering?
Put a spacer kit on it a power wheel truck body and all set. Nice build.
I actually stretched the whole suspension. Made it wider and softer. There’s videos on the build
this video makes me laugh :) just think of all the exercise that dog gets. lol.
i am very impressed whith how well it moves.
Bahahaha why hasn’t this gone viral. So funny that’s a sweet build!
awesome RC and your dogs are piece of art :O
awesome! Is it a converted regular quad?
BRO !!!!! I have that same quad and thought to do the same thing, what did you use for servos ? definitely doing this lol but I wanna mount a pick up body on it.
Nice boxer I got 1 also
the dogs are the best part of the video
I was waiting for the dog to get hurt.
Good day. Wanna make my electro quad - rc controlled. Can you tell me, what stuff you use for wheel rotation? Big thanks!
That's a nice piece of kit. Bet it was fun to build!
That's epic man and my dog chases me on my dirt bikes and quad to biting at the tires lol
YOU NEED DIFFERENTIAL :))
wouldn't it be possible with a 1:5th scale servo? i know that depending on what transmitter you have, you can set up a 2-way switch to make the servo go one way a little bit, and back to neutral. if you make it go down for one way on the switch, and up for the other, you should be able to shift gears. as for the servo on the quad, it shouldn't be any problem to figure out a link between the existing gearchanger, and the servo =)
At least you're not lying to the Mrs when you say your taking the dog for a run.
Sir,
What servo are you using for steering?
Dogproof tyres required.
nice
what you use for the sterring servo? (part number)
I didn't mind the dogs one bit
This vid is old, but I wondered if anyone did this and put fpv long range on it to mess with people even more lol.
Hey cud you pleeeaaassseee answer my question what engine is in there?
Lonnie Yoder 110cc 4 stroke
RobesEleven thanks
awesome!
Im Also gonna gear it to go faster, install a hitch and install weaker springs...
Those danm dogs!
Damn that looked fun
have u tried riding it
That's bad ass and my boxer baby would do the same thing
dog is cracy
Springs are too hard, they need to be drastically softer without a rider on. i discovered this when i converted a mini quad to rc, the stock springs might as well be bricks without a riders weight but 7mm thickness to 4mm springs changes everything and stops the bouncing.
dont know what the spring thickness is on those quads but a similar reduction would make a huge difference
Steve Fox I just made the suspension wider
@@djnemesis82pluss1877 you mean you extended the track of the wheels?
Steve Fox no I chopped up the a arms and made them longer. Made the quad like 8-10 inches wider and softened up the suspension. There’s videos on here about it
@@djnemesis82pluss1877 yes, making it wider is increasing the track!
lol you boped the dog like 5 times
Can’t go to jail for something you’re not driving lol
Fuckin dog.
Now you can use it to lure that dog away from the house 😈
Apoyemos a omega el fuerte🌎
i have this idea for years, only no time and money. Anyway, you should try to change the gear, like a tooth or 2 more at the engine, or a few less at the rear. because it can go alot faster now that it doesn't have to carry the weight of a grown up. Also try to find some weaker springs, because these ones are way to hard for the same reason, so weaker ones wil give it a much better handling.
And how about a body from a per perego ride on jeep? Because that's the best looking scale body imo.
yeah id like to have reverse
You can't control your own dog, and you're building Terminators, uh?
I now have to do this. Just to say I did
Great quad, great dogs too!
ah. i see. and after some calculating, it see it would land around 470USD for a new radio+engine. but it isn't the biggest money, compared to buying a Losi 5t LOL
slap a stuffed deer body on that thing and sell it as a dog trainer lol
its a torxis i0600
reverse would be easy but the motor dont have it would need a new engine and different radio would cost an easy 500 bucks to do just dont feel like putting that much money into it already got over 2000 in it nah mean lol
he really does not like that bike at all :))
I didn't see a bike
mite make one
That's just a quad bike changed into a big rc car
Yvonne Coleman no shit captain obvious! fucking dumb ass
My x-Wife came how with one if them Boxers... I hate them to this day.. 25 years latter.
RC stuff very cool .. Hate them fucking dogs.
Good talk just hates anything with an engine lol
OWNKILLER3942 watch channel because we are building a rc quad bike backyard like this
That dog loves mouthfuls of dirt.
My wife's chihuahua... not so much.
She got a little ballsy one time...
Never again
WHY NOT LEAVE DOGS SAFE INDOORS
I GOT A REAL QUAD
L truely can't figure out why all these people are bitching about the dog, if you don't like it don't fuckin watch, its pretty simple solution. I got say I thought it was a pretty sweet toy, and I'm guessing that with a charging system, the only thing thats needed is gas and a remote?
Kris Hillis and spare parts lmao
I hate dog.
dog hate
Idk about hate but they defiantly ruin the video
Cant watch, hate dog.
bark bark bark bark bark bark bark bark .....then.......yap yap yap...yap! :-)
Man that things is awesome! Nice work !
what gear do you drive on? i had a similiar one, 3 gears+reverse. ran on second mostly. would be cool to make a system so you can change gear with a 3 position switch on the transmitter =)