Hi there Thanks for the videos, just some questions here: 1- Why did you choose wall as BC for the enclosure(wall-fluid-domain)? 2- Why did you choose pressure outlet and not outflow for outlet BC? 3- Why did you choose hybrid initialization in this simulation?
what does it means if convergence tolerance of 1e-06 is not reached during hybrid initialization? What can I change to correct this? Thanks for your videos
No need to worry about it. Its just a initialization process. Generally, while you put the hybrid initialization, the solver do some initial calculations to find out what would be the initial parameters at domain. Its that convergence criteria. Its different from the solution convergence residuals.
Hi, Can you please help me with the transient structural analysis of the engine combustion chamber? I am not able to include the piston movement. Your help will be much appreciated.
Thanks so much for your video! It is very helpful! Would you mind to create another tutorial on how to use Fluent to apply radiation, conduction, and convection this same bridge geometry? It will be really useful if the radiation strength and angle are changing with different time of a day. Another example of showing how to map the temperature distribution to structural model will also be very helpful for lots of people. Thanks!
I want to simulate a transient two-phase flow with VOF in porous media considering capillary action. The porous zone is initially filled with air. I want to model the displacement of air with liquid water due to capillary forces.
I want to analyse wind load and want to find sterss value in this same structure ...can i coupled fluent with static structure...?..my approach is right..?.. suggest me sir..👍
@@AnsysTutor I need to implement this idea to complete my study. Is it possible to add a new part to these parts please? part 3/3 stress on truss brigde due to fluent 😥😥😥😥😥
Very intelligent way of presentation especial background music and simplicity of the model
Thank you Mahmoud.
Hi there
Thanks for the videos, just some questions here:
1- Why did you choose wall as BC for the enclosure(wall-fluid-domain)?
2- Why did you choose pressure outlet and not outflow for outlet BC?
3- Why did you choose hybrid initialization in this simulation?
what does it means if convergence tolerance of 1e-06 is not reached during hybrid initialization? What can I change to correct this? Thanks for your videos
No need to worry about it. Its just a initialization process. Generally, while you put the hybrid initialization, the solver do some initial calculations to find out what would be the initial parameters at domain. Its that convergence criteria. Its different from the solution convergence residuals.
Can you show how to calculate drag on the walls of a porous body which are set as interface in fluent?
Sorry, dont have knowledge regarding that.
Thanks for your tutorial video sir!
You are most welcome.
hi, can you upload a tutorial on simulation of swirling valve for fluids? Appreciate a lot for your time and consideration. TQ
It requires dynamic meshing with a lots of time.
Sir, Can you please upload tutorials on dynamic mesh..
Will try to make a tutorial.
Hi, Can you please help me with the transient structural analysis of the engine combustion chamber? I am not able to include the piston movement. Your help will be much appreciated.
Piston motion can be done using a dynamic meshing.
@@AnsysTutor is there any video that you've made how to do dynamic meshing?
Thanks so much for your video! It is very helpful! Would you mind to create another tutorial on how to use Fluent to apply radiation, conduction, and convection this same bridge geometry? It will be really useful if the radiation strength and angle are changing with different time of a day. Another example of showing how to map the temperature distribution to structural model will also be very helpful for lots of people. Thanks!
Will try to make a tutorial on that. Thanks for you query.
@@AnsysTutor Thanks for all y our hard work!
Please provide a tutorial class on forced convection solar air dryer with vertical fin.Thank you
Will try to make a tutorial.
I want to simulate a transient two-phase flow with VOF in porous media considering capillary action. The porous zone is initially filled with air. I want to model the displacement of air with liquid water due to capillary forces.
Sorry, dont have much knowledge regarding this type of simulation.
Great work!!! Could you please make a tutorial of the Analysis of Two Concentric Rotating Cylinders in 3D????
Its similar to this case, only you need to select the cylinder surface as the moving wall.
@@AnsysTutor Thanks for the reply. How can I define fluid between two cylinders?
Ye analysis ke liye ansys student version se ho jayega ya licence lena padega?
Can be done using student version.
What is the version of anysys used here?
ANSYS 20 R1
What is the difference between local and global range?
Local range show only the min and max variation of the selected plane only. While global range is for the entire domain which is taken for analysis.
Can you upload a tutorial on heat transfer analysis in plate heat exchanger please? Appreciate a lot if you can
Will try to make a tutorial.
I want to analyse wind load and want to find sterss value in this same structure ...can i coupled fluent with static structure...?..my approach is right..?.. suggest me sir..👍
Yes, you can do it using one-way coupling.
@@AnsysTutor Thankuu sir
Sir please provide a tutorial of water flow boiling in a rectangular microchannel... Pls
Will try to make a tutorial.
@@AnsysTutor thank you sir
can you help me with the geometry of this model
Watch part 1 of this tutorial.
yes i have watched it but in this video how you have designed the truss members inside the bar
sir which version of ansys fluent you are using
Ansys 20R1
can i calculate the stress in truss due to fluent ? i hope make video pls
Yes, you need to FSI- fluid structure interaction model for this.
@@AnsysTutor
I need to implement this idea to complete my study. Is it possible to add a new part to these parts please?
part 3/3 stress on truss brigde due to fluent
😥😥😥😥😥
plz sir make video Geometry Twin screw compressor rotor and casing ..if you already done please send me link...Thanks
Plz share the details of the geometry
Thank you😎😎😎 u are the best
You are most welcome.
Great 👍
Thank you.
where is part 1 ?
link given in the description.
Y love you so much
Thank you.
This song makes me sleps
Hello
Hello
Are you Indian?
Yes.