X32 One Console, One Sound Tech, House and Stream Mix | Complete Setup
ฝัง
- เผยแพร่เมื่อ 8 ก.ค. 2024
- ** NOTE **
Please make sure you save your scene on the console BEFORE you update firmware. Your current settings per channel will be cleared. You can reload your scene after update, but make sure to save your scene before updating.
__________
If you are like me you have been anticipating returning to your normal venue, but not all of your sound techs are returning to serve. You need to find a way to make a mix that works for your room, but also offers a mix that will work for your stream. In this video I walk through all of the steps to setup a post-fader mix on a stereo AUX Bus that sounds great and could be just the information you need to transform your live stream experience this weekend.
** Other Videos Mentioned **
Best Reverb on the X32?
• Which FX Rack Is Best ...
Setting Gain Structure
• How To Fix Low Live St...
** Time Stamps **
0:00 - Start
5:08 - Create Stereo, Post-Fader MixBus
8:01 - Send Inputs to MixBus
12:00 - Add FX for Live Stream
18:10 - Remove Stream FX from House Mix
21:19 - Add a Limiter
26:11 - Quick Recap
29:20 - Panning in Your Stream
32:26 - Assignable Buttons (tap tempo)
34:44 - DIM Button - Headphone Volume
** Music Copyright Stuff **
The music used in this video is a recording from my church performing the song "Unstoppable God" by Chris Brown, Steven Furtick and Wade Joye with CCLI# 7011436. I don't own the rights to the song, but we did perform this live with no backing tracks.
*** NOTE ***
Please make sure you save your scene on the console BEFORE you update firmware. Your current settings per channel will be cleared. You can reload your scene after update, but make sure to save your scene before updating.
@allamhouse help. My audio goes out on my console 15.16 and that's where the audio is patched. How do I get just the live mix to go to the usb at the back instead of the entire post fade mix. Help
Thanks for all the work you do on your videos. They have really helped enhance our live stream audio quality.
Another great video. Thanks! Good take on setting the room space for the stream mix with a verb/verb + delay combo. I like it!
Hey Dave, thanks again for this in depth video. Again, this was exactly what I needed for church. You got the heart of the teacher man.
This is the only tutorial that actually gave me the info I needed! 10/10 great job!
Thanks for the encouragement.
Great job Dave, appreciate the information and quality detail.
Thanks for the encouragement.
Incredibly helpful! Testing it out tomorrow!
That’s great. Thanks for the feedback.
Glad I found your channel. Feel like I learned a semester's worth of material!
Thanks for the encouragement. Let me know if you have any questions.
Another well done video. Thank you for taking the time to lay this out!!! That song sounds fantastic as well! would love to hear all of it!!!
Thanks for the encouragement.
Thanks for your patience and explanation. This will help for my XR18
Thanks alot
Thank you for spending the time to teach this. It is invaluable.
Glad it is helpful.
i watches this video more than 10 times. Everytime i learned smthing new. This video is so compact of lot of tricks hand tipps. Thanks again ang again!!!
Thanks for the encouragement.
DUDE.... YESS!! Ty so much for this in-depth tutorial! I am in the process of bringing together my X32 rack mount and ATEM Mini; this totally gives me some direction. Currently running X32 audio out of Aux 6 into the ATEM, , but I have Ableton live on another computer (coming into X32) and would prefer to run everything off 1 computer. Can’t wait to work on it tmrw. Cheers!
So so many thank bro ! it still working ! wish you so much happy in life
I’m glad you found it helpful. Let me know if you have other questions.
This was an EPIC tutorial @AllamHouse. Thank you a gazillion times.
I’m glad it was useful.
Dude, your videos have really, REALLY helped us to up our game. Our livestream has been sounding better and better. We're just playing around and tweaking settings, fine-tuning for our set up. Thank you so much.
Thanks for the feedback.
A year later appreciating the knowledge thank you sir
Thanks for the encouragement. Let me know if you have any questions.
This is the best turorial about x32 set up for live streaming. Thank you very much from Indonesia. God bless u...
Thanks for the encouragement.
Very good video. Thank you for doing it. Super helpful to novice engineers and “de facto sound guys” like myself.
Great explanation.
Thanks for the feedback
This tutorial was the missing link to my church livestream mix. Implemented in service today with the exact same settings and the outcome is on point. Thanks a lot
Thanks for the encouragement. I’m glad you found it helpful.
All I can say is...WOW!!! That video was exactly what I've been searching for. Thank you sooooo much. I was already using a MixBus to send out to our ATEM Mini Pro, but you helped so much with how I can EQ and set limiters on my external recording mix. Thanks again, and God bless!!
Awesome. Glad it was helpful.
Very detailed! Thank you so much.
Thanks for the encouragement.
This is the by faaarr best Tutorial i ve seen in YT yet. Well organized well explained!!! Thanks a LOTTTTTTT!!!!
Thanks for the encouragement.
Great video! This completely changed my stream mix. We use Switcher studio for our video stream, between this mix setup and being able to connect the x32 directly to the iPad via a USB-B to lightning cable its made a night and day difference. Thanks!!
Glad it is working.
Every part of this video was useful. Thank you so much for making these videos, they have been very helpful
Thanks for the encouragement.
Great Video! Thank you!
Thanks for the encouragement. Let me know if you have any questions.
Thank you for the detailed tutorial. I learned so much from this. We recently started a live stream and I’ve been struggling mixing front of house and stream. I plan to put this to use and hopefully increase the quality of our production.
This will make your role so much easier going forward.
Thank you so much!!
I’m glad it was helpful.
Dave thank you so much for all of your videos and especially for this one. I e been trying to clean up my live stream for our church. I’ve always been a strong advocate for streaming pre fade in an effort to have more control over the stream. But I really listened to this video and I’ll tell you I’m doing less work with just getting a good mix and making small adjustments to the house and allowing the stream mix to follow that. Blessings to you my friend and Happy New Year.
Happy New Year. Thanks for the encouragement.
Pierwszy film szkoleniowy, który krok po kroku wytłumaczył mi jak ustawić parametry pod "live stream". Bardzo dziękuję. Świetna robota 👍
Thanks for the encouragement. If you need to route this out USB, this video here is the companion that walks you through that setup. th-cam.com/video/Vx4HjArTeZI/w-d-xo.html
Superb.
I’m glad you found it helpful. Let me know if you have questions.
Hey Allam, thanks for your video, they are really helpful. God bless you!
thank you very much for this
Thxs for all the information, learned a lot of the effects for the stream.
Thanks for the encouragement.
This is such a great explanation of the FX. Thank you!
I’m glad it was helpful.
@@AllamHouse I think this is still the best advice out there. The extra settings, FX, etc., work perfectly. Two years with no problems!
Hi Dave, we were just trying to figure out stereo bus on the X32. Thanks!
Thank you so much, was having problems with making the bass guitar and live mix present. This will help much.
I’m glad it was helpful.
What a blessing. I'm trying to set up a scene from scratch for the first time after using a pre-set scene for several years. It is so different managing a system, while still understanding it, versus doing it all yourself from the ground up. You have been instrumental in helping me accomplish a years long goal. Thank you!
Thanks for the encouragement. I’m glad you’ve found the videos helpful. Feel free to post any questions you might have along your way.
Huge help - thank you
Thanks for the encouragement.
Loved it! Super helpful!
Thanks for the encouragement.
Thanks for the video. I’m definitely going to have to try the limiter.
Thx!!! super useful Greetings from Ecuador
Thanks for the encouragement.
Sir you're a Hero, thanks so much for that, I'll see all your videos.
Glad it was helpful. Thanks for the encouragement.
istimewa sekali mas, tutorial yang sangat membantu
Based on Google Translate, it seems like you found the video helpful. Thanks for the feedback.
Everything was helpful. Thank much !
Thanks for the feedback. Let me know if you have other questions.
Dave, Superlative content and production. I set up the X32 according to your videos. Everything works now. I can't thank you enough for your efforts.
Thanks for the encouragement. I’m glad it helped you get all setup. If you want to see the full details of my scene, I have a playlist here that goes through the different groups and you might find them helpful. th-cam.com/play/PLsW5UVUiB1ry8bnPJ5q8fR93KHW2TPKpg.html
@@AllamHouse I'll check them out. Thanks for the heads-up.
Thank you so much for this...
I'm glad you found this video helpful. Let me know if you have any questions or need help with other parts of your setup.
What part did I like best?… All of it!!! Most helpful. Thank you so much. The Lord bless you indeed!
Wow, thanks for the encouragement. Let me know if you have other questions.
Very well done!
Thanks for the encouragement.
The whole video was so helpful for my church thank you very much God bless you
Thanks for the encouragement.
I watched a lot of tutorials with this Board and pretty much understand but in this presentation you simply THE BEST! The way when you do "QUICK RECAP" where you review what you did is GENIUS! I can say even someone who is new in this field will understand and can follow through your teachings.
Wow, thanks for the amazing feedback. Let me know if you have any other questions. If you want to see one final change I've made feel free to check out this video. th-cam.com/video/9abR8wv4a9c/w-d-xo.html
Am just gonna start using one of these mixer so this was very helpful
Awesome. I’m glad you found it helpful.
You have no idea how much you have helped me. I watched about 12 of your videos. I can’t lie my brain is fried. My church is finally making the transition to a digital board. I’m the one that handles the live streams. So I’m pretty much the only engineer. Thank you so much for taking your time to make these videos. God bless you abundantly.
Thanks for the encouragement. I’m glad you have found the videos helpful.
Love the song
Thanks for the encouragement.
Thanks so much--this is very helpful! We just got an X32, and it's sitting in my living room while I set it up as much as I can before installing in my church tomorrow. I'm following your settings here for getting the livestream mix. The panning part was especially useful, as we have a single line array that's not in stereo, so from your video I learned how to pan everything for the livestream mix independently of the house. Thanks!
That’s awesome. You’re gonna enjoy the console. Be sure to ask questions as I’m happy to help.
@@AllamHouse Thanks Dave, I appreciate your help! We have a mono setup in our church that consists of a single line-array of speakers with some subs. We have an external processor that does all the crossover and delays for the speakers. I set up our main LR mix to be summed to mono in a matrix bus and outputed to Ch 16 for the main mix, and I set up a link pair of buses post-fader as you described for one sound tech managing house mix and livestream. We have a few instruments going into the system in mono (acoustic guitar, electric guitar, piano) that we'd like stereo in the livestream. I set these up as adjacent inputs (acoustic L, acoustic R), and I will change the input source to be the same for both channels. The pan is set differently for each of the channels, and we will set EQ to be a little different in each channel. My understanding is that one channel should be delayed slightly (14 ms or so?). What's the best way to do this? Would this be okay if both channels (acoustic L and R) are going to the main mix that'll get summed to mono for the house speakers, or should we mute one of the channels for the house speakers? Thanks again for your help!
You sir have taken the mix to the next level... quite impressive. In your scenario, when doubling up on a mono input and doing the 'delay trick', I would only send the mono signal to the house (mono mix) and then send both signals, properly panned to the stream mix (stereo mix). Because the same performance is being doubled, there is not enough differentiation for the mono mix to process it well and it will generally just create a muddy sound. I also do this for my monitors. My IEM's are mono so I tell everyone to only use the first acoustic channel so they get an accurate tempo in their head.
Thank you so much. We have an X32 compact and are struggling to get a good live stream mix for the very reason you mentioned. We have one engineer trying to mix FOH and Live Stream. Since the focus is on the house, the live stream is struggling. This video is very helpful!
Thanks for the encouragement. Keep trying, keep evaluating, keep learning, keep getting better. You can do it.
Well explained, exactly what i needed. Thank you very much
Glad it helped!
Thanks for the video. Had always wondered how to just have the stream through the headphones to monitor. Looks like got alot of setting up to do because noticed was quiet but the limiter setting has probably answered my question.. God bless and thank you for your video again
Here is a different video I made to help address the Low Volume concerns on our streams
th-cam.com/video/-RjP3IKFfqM/w-d-xo.html
Thanks very much your tutorial was very helpful
I’m glad it was helpful. Let me know if you have any questions.
This was VERY helpful, thank you
I’m glad it was helpful.
This was AWESOME... I am tech director at a a small church that is dealing with just this problem! We consulted with a larger church in our area and were encouraged to look into the X32 and a Dante card to run a separate mix. What I like about your video is that it does a good dive into what an X32 can do if you know what you're doing. Gives us much to consider (and keep researching). Thanks!!
This is great, thanks for the encouragement. This console really is amazing for the price point. Dante is nice and can offer many great opportunities as your needs and team grow. If you are like my church you only have one qualified technician to mix on any given Sunday so moving to Dante to use a DAW or additional board still requires additional volunteers which we don’t have. There are a few solutions (this setup being one of them) to help get a solid mix for your stream without needing ore volunteers. Let me know if you have additional questions... I’m happy to help.
Fantastic tutorial, many thanks for making it so clear to us :)
Thanks for the encouragement. I'm glad it was helpful.
owasome brother...thankx a lot...
I’m glad this was helpful. Let me know if you have other questions.
YES!!!! This is such an informative video!! Whoever set up our stream mix just put an output from the monitor jack to the stream system which just reflects what the house is doing. The broadcast is inconsistent and sometimes they turn the house up too loud which blows the stream out. Terrible! Someone mentioned there should be a way to make a separate mix for the stream.....and so I'm here! Now I can't wait to go mess with the board! (I'm not the sound person, I'm just the one who takes the time to figure this stuff out and learn what I'm doing lol)
Awesome. I’m glad you found the video helpful. Feel free to come back with questions.
Great tutorial. Very specific. THX
Thanks for the encouragement.
Thx Allam,
God bless
I'm glad you found the video helpful. If you need to find a way to route this mix out of your console, here is a video that covers the three options you might consider. th-cam.com/video/xGt1z5I7blQ/w-d-xo.html
Very helpful! Thanks a lot!
Thanks for the encouragement.
thank you so much.
I’m glad it was helpful
Hey, thanks for this amazing and helpful video! I would have loved to not only see the changes you made but also hear it or a “before and after” comparison, so that we can have a clearer imagination. Nevertheless this video is the answer to some problems I’m facing! Thx a lot.
Much love from Germany🙏🏾🖤
If you want to dive-in deep to my settings, I have a playlist that has videos breaking down all of the settings I use. It is multiple videos (overview, drums, band, vocals, etc) and goes through with audio examples of each effect, EQ and Comp. Check it out here. th-cam.com/play/PLsW5UVUiB1ry8bnPJ5q8fR93KHW2TPKpg.html&si=bd3civGcjtvzZuLe
I settled for a mono mix for my live stream thinking I cannot pan the instruments to the mix busses. Thank you!
Glad this video helped.
Thank You AGAIN !! I don't mean to be a nag. But now you gave me pretty much all I have questions for. I know I'll be watching it over and over again to catch some things I might have missed. But Yes. It does answer what I need.
I'm glad you are on the right path. Let me know when other questions come up.
@@AllamHouse I wasn't planning on needing any help this quick. And really doesn't have anything to do with the Live stream. BUT.. We just made the jump from floor monitors to earbuds. In the must part it's going ok. Still needs a little tweaking. But the problem is, Our Pastor has never been on his own monitor. I just mixed him into the floors, and not that much. So now he's just on the Mains, BUT he's not coming out of mains ANY MORE !! He's coming across the Live stream fine. I can't figure it out ??
My guess is you removed him from the Main LR Bus. Just select the pastor channel, and go to the left of the screen and find the button that says "Main LR BUS" and make sure it is lit up orange. This is the magic button to get the audio back into the main mix.
@@AllamHouse and again. You were right on. I don't even remember turning it off. But, AGAIN Thank You. Didn't you, at one time send me a link/page that I could send you questions without tying up the TH-cam posts ?? May be easier then filling this up. Unless you think that what we talk about may help others. I'm open for either
The comment section is ok, but I don't know how deep people go hunting through conversations. You can always reach me outside of YT by filling out the contact card on my website. sound.allamhouse.com
Was able to start messing around with this setup today after service.
That’s awesome. Good luck with the setup, let me know if you have questions.
Thanks, glad I found this. Btw, “Dana” led me to this link. Cheers!
I’m glad you found it helpful.
When and how to put the limiter was exactly what I was searching for all the afternoon.
Big thanks and greetings from switzerland
I’m glad it was helpful.
Thanks..
Let me know if you have other questions.
good job, allam. i've learned a lot with this video. thank \o/
Thanks for the encouragement.
yo bro thx so!
I’m glad you found the video helpful. Let me know if you have any other questions.
thanks alot great advice keep it coming
Thanks for the encouragement.
@@AllamHouse youre welcome. i just got an x32 rack so ill be checking out a lot of your videos.
toma tu like, si me funciono, gracias!
I’m glad you found this video helpful.
Good video. Didn't have time to watch the whole thing so you may have suggested this but may i suggest that instead of using a mix buss to you web stream, to use busses to matrix. Use your busses for grouping instruments, and then send those to matrices to your outputs. Use 1 stereo pair for you house and another pair for your web stream so that way you maximize your busses. Then mix off your dca's so that when you make your mix level changes on your dca, you are making relational changes to all you mixes in one shot. This also frees up your stereo buss as another "matrix". I do this in all my mixing, but especially in my corporate events. May have to send a web stream, a house mix, a center fill, delays, record feed. By using good gain structure and good room tuning, you'll be able to get balance mixes to all points very quickly. Happy mixing.
Yeah, Matrix is a different approach and does provide great results. I have another video that covers setting up a matrix for your stream, but this specific video is the method my team uses in our church. I use buses in a different way and plan to go through my approach in an upcoming video. Thanks for the comment.
Great video! Just a thought, since you're using that limiter on your live stream mix, try setting the bus compressor to 1 1/2 to 1 with 100 ms attack time and threshold set to pull 6db at Max. It will smooth out what gets sent to the limiter and make your mix even fuller.
Thanks. I’ll give it a shot next time I’m up to mix and see how it reacts.
Thank you for your video. We will try to implement it. I have been looking for this kind of video because in our streaming video to FB and TH-cam we can NOT hear the effects we give to the singers. We do not have a band in our church so our music is very simple. We only want to hear the effects on singer's mic we put on the house mix to our streaming mix. We use Bus 7 but it is not stereo therefore I learned from this video. I learned a lot of things from your videos. I am trying to watch them all because your explanations are simple.
Thanks for the encouragement. I'm glad you are finding value and learning from the videos. If you come up with other questions feel free to post them in the comments and I'm happy to answer and/or make a video out of the answer.
Great tutorial! I Just wanted to note that my x32 is on version 3.12 and I was still able to do all of this.
Yes, you can do it on the older version, but the custom routing that many people do to send this out USB is not capable on firmware older than 4.0. This video explains how to do this to route out USB and into a streaming device. th-cam.com/video/Vx4HjArTeZI/w-d-xo.html
@@AllamHouse oh! Okay, I don't send audio to our livestream via USB so that is why I am confused haha.
How do you have it connected at this time?
@@AllamHouse I have the stereo mix bus going to a pair of aux outputs and into our video switcher.
great video. another way is to buy an inexpensive stereo audio interface. Behringer makes one for around a hundred bucks. Send your aux outs to it then usb, either straight to your streaming computer or switcher. Also has a zero latency headphone out so you can have a set of cans plug into it and monitor it that way.
You are exactly right. I love this stuff because there are so many ways to get things done, just have to find what works for tour environment.
You talk like if you designed the console, you understand and use every single detail of it!!
Thanks for the encouragement. I wish I was involved in the build, but just spent a lot of time on the console.
wow
I’ll take that as a vote of encouragement.
Dave, God has truly blessed me to find out about your channel!
This is just what I needed. I've gained more from you than I have the last 6 years in school. I just graduated last April with a BS in Digital Audio Technology but no one taught us Live Sound. Do you have any tutorials for getting the best sound in house from the Pastors mic. I use a DPA headset with IEM. And Sennheiser wireless transmitter and reciever. When he sings there is so much distortion
Thanks for the encouragement, I'm glad you are learning. It sounds like the gain is too high in general. It is probably fine when he is speaking, but when he is singing it jumps up into digital clipping. Do a soundcheck with him and set his gain to -10 (on the meter) when he is singing. This will make his speaking seem a little soft, but you can use compression to not only control his overall volume, but raise his speaking parts. You might find you want to use a second compressor inserted like I do for my singing vocals. Stacking compressors allows you to not overuse one compressor, but let each one work a little and it makes everything sound natural. This video here runs through my vocal settings in depth on my pastors mic and my other vocal mics as well. th-cam.com/video/E5xyJXaliMg/w-d-xo.html
Great video! At 29:10 you mention the need to be careful not to accidentally touch the mix bus faders for your stream. This is especially important in order to avoid clipping the stream, since the limiter is inserted pre-fader. It would be nice to insert the limiter post-fader (so if you raise the fader, it just pushes into the limiter, instead of raising post-limiter and clipping your stream) but unfortunately I don't think that's possible; it seems like the only choices for insert position are pre-EQ and post-EQ, not post-fader -- and of course you'll almost certainly want post-EQ. The only 2 workarounds I know of are:
1. Change the output tap to pre-fader instead of the typical post-fader tap. That way, you know that the limiter (or compressor @ 100:1, if you want to avoid using up an FX slot) is absolutely the last thing before the physical output, and therefore you'll never accidentally clip the stream since there's no fader to accidentally push.
2. Run the fader at +10 instead of unity, again so that there's no chance of accidentally pushing it up. In this case, adjust the output gain of the limiter by -10 to compensate (to -11dB in your case). If using the compressor as a limiter, unfortunately the output gain doesn't go below zero, so set the threshold 10dB lower to compensate (and then adjust all channel sends by -10 as well, which makes them harder to use given the log scale). The only benefit over option 1 is if you want to "fade out" your stream using this fader; otherwise it's kind of pointless.
But it would be super cool to make use of the fader in a pre-insert (or pre-compressor) manner, so that you can ride it as the program levels vary! Any ideas? An assignable knob (or MIDI controller) could be used to ride the input gain of the limiter, if it doesn't inflict zipper noise, but adjusting into the mastering compressor would be even better.
Yes, I actually do something like this now where I send my MixBUS to a Stereo Matrix which has the limiter on it and is setup as Pre Fader to not be susceptible to the fader movement. Here is the video that discusses that setup. th-cam.com/video/9abR8wv4a9c/w-d-xo.html
@@AllamHouse Brilliant! Have the output tapping the matrix pre-fader to ensure no accidental gain after the limiter, while keeping the bus fader to help ride the mix into the mastering chain (and fade out at the end of broadcast). 👍
For your need to ride the volume during an event you could assign a DCA to the MixBUS for volume control or you could use on e of the knobs in the assignable section to control that volume as well (if your DCAs are all used up).
You sound and remind me like Dallas Jenkins, creator and director of The Chosen series!
I'll take it. He's a pretty impressive guy.
Great tutorial as always! How would I go about routing just the MixBus I am using for livestream to the USB card? I have look at a lot of videos but still have not been able to figure it out. Thanks for the Fxs answer you gave me. Thanks to you I was able to fix it.
This. Idea is the companion and covers the routing for sending the stream out the X-USB card to your computer. th-cam.com/video/Vx4HjArTeZI/w-d-xo.html
Great Video! Will you please do a supplemental video showing us your OBS settings?
I can, but it is a very simple setup. Our cameras and audio go into a Blackmagic (BM) video switcher. This goes across an AJA-Utap device to convert SDI->USB. OBS has the BM device setup as an audio input and a video input. The only additional thing we have is our lower -third lyrics coming across NDI from Pro7 into OBS as well.
Very helpful- the matrixes on these boards are really flexible…….. i was curious about external inserts or even an external chain prior to stream- say a 500 series rack with a couple of modules- in some of the earlier digital boards we would take the headphone mix off the board and feed it into a headphone amp- or switcher for distribution to secondary monitor sets - today that could even be a analogue stereo out put for stream
The BUSes are where you can build your separate mixes as mentioned in this video. The BUS could be a mono mix to support a floor wedge, IEM mix, or like this video a live stream mix. You could then route this mix to an output to a live stream device or to a Matrix where many people send to other locations within their facility (cry room, nursery, lobby, etc). In terms of the actual routing, I have a number of videos on routing depending on where you are sending your mix. A common companion video to this one is listed below and shows how to route your mix out the X-USB slot on the back of the console and send into a streaming device across USB. Others will route out XLRs on the back of the console or even the AUX out (1/4" slots) on the back of the console. I hope this gets you going in the right direction. Let me know if you have more questions. th-cam.com/video/Vx4HjArTeZI/w-d-xo.html
@@AllamHouse thanks for the reply and the link i just saved it- so it sounds like all the inputs and all the outputs are assignable - so you can assign outputs of an XLR to a 2 mix on a buss and then plug that into the back of a piece of hardware???
There are a lot of options for sure. The board does offer standard AUX outputs (and returns) that could be used like a standard analog console with outboard gear. You can do it digitally with gear in a DAW on a computer and even further you can route the same mix (FOH, stream, other) out multiple outputs to send to different places to meet your needs. If you want specific help, I’m happy to do consulting. Just fill out the contact card on my website at sound.AllamHouse.com.
@@AllamHouse The one thing that concerns me is the clocking on the board phase alignments of multiple channels with some of The front of house mixes I’ve heard off of these boards the more channels that you start to stack the loss of dimension seems pretty striking whereas when you have a single speaker or say a singer with a piano there’s tremendous clarity
Of course I’m wondering is that a clocking issue, is that a converter issue, is it latency as you start to add digital processing which by nature creates latency
Thanks so much for sharing this, it’s really a great blessing to us. When we use the effect 1 & 2 for room reverb & delay +chamber on the exclusively for live-streaming . What effect would you recommend we use for the FOH? I can’t find similar effects on other effect rack - we are using x32 compact. Thanks 😊
The FX 1-4 allows you to use the same FX multiple times. In the video I explain how I have a Vintage Verb (BUS 13) for FOH, Delay (14) for FOH, then Vintage Verb (15) for my stream and Delay (16) for my stream.
You have been greatly helpful, I appreciate your willingness to share your knowledge. I have a question: so, as we moved into a hybrid reality for Bible study, we just purchased a shure cvo overhead, so that people can hear in house discussion. Now, it’s gotten a little feedback-y because of gain. As we don’t really use the overhead for worship, is there a way to send it only to the bus mix and not master FOH? Or, do you have any suggestions for eq-omg overheads for auditorium/sanctuary? Thanks!
A crowd mix should pretty much have everything below 400hz rolled out and the rest will depend on the amount of PA and other things coming into it. You will have to crank the gain since the subjects tend to be far away. As for keeping it out of the mains, just simply select the channel and push the ‘stereo bus’ button next to the screen so it is NOT orange. This will make sure it doesn’t go to the mains and then you can send it into your stream or monitors. I cover these concepts in this video about monitors. th-cam.com/video/zwYcNieISF4/w-d-xo.html
I put most of these tips into place on our M32R for services today and got lots of compliments. The FX in the livestream were exactly what we were missing. Thank you! In fact, I got so excited about getting the FX right that I have missed setting up the most important part: setting up the mixbus to post-fader! For now, I'm pretty sure the mixbus is still set at Sub Group. When the full band is going, the mixbus is loud and getting pretty deep into the orange on the meters. However, when it's just the pastor, I barely get two bars of green. Therefore, I need to adjust the mixbus fader during that transition from worship music to message and then again from message to closing music. Will this fix itself once I get it set to post fader? Will adding the limiter possibly help with this? I would rather not have to make this adjustment, but if I need to I will assign it to a DCA.
Go ahead and make that change to be a Post-Fader mix and the. You will have the flame in illy to turn up the pastors mic and make the fine adjustments to your stream mix. The limiter will also assist in getting the soft levels up while keeping the loud parts from clipping. I have my stream audio (music portion) just below clipping at -1 before it goes to our stream. I cover those settings in that video so you can go back and check over them using the quick links in the description.
Hi @AllamHouse. I love the video. However, it seems that I cannot make the first two effects not affect the room mix. I unchecked the stereo bus button as shown at min 19:45, but I still can hear them in the room. Any ideas what might be the problem? Thank you
There are a few things to check.
1) Always start with muting the FX send to make sure it is not something else you think is the FX.
2) Make sure you don’t have the FX sent to a MixBUS or matrix that might be feeding into your mains or speakers.
3) Make sure you have the “Stereo Bus” button de-selected on the FX returns.
Watched your videos a million times adjusting and tweaking my mix. My question is where can I watch a live stream from your church to compare my live stream?
That’s great. I’m at Area 10 Faith Community. Here is a link to a recent stream. Keep in mind we have 4 bands and 5 sound engineers so our mix will be slightly different from week to week. Also, everyone is volunteering so we don’t have paid professionals in any spot. th-cam.com/video/d34q8pKBK68/w-d-xo.html
Thanks so much for the live stream info works great. My current issue we have a vocalist which accentuates plosives a lot. I cannot find the right frequency to cut. Any Ideas?
Typically plosives happen in the 120-150 hz range. I usually use my low cut to sure this issue, but you could use your lowest EQ point if needed.
Thank you so much this video was exactly what I was looking for. I have a question how do I route the live stream mix bus to my live streaming software (OBS) using the USB on back of the console?
I'm glad you found this helpful. This video explains the three common ways to get your stream mix from the console to your streaming device. th-cam.com/video/xGt1z5I7blQ/w-d-xo.html