Assembling a XS Power Lithium Battery

แชร์
ฝัง
  • เผยแพร่เมื่อ 20 ก.ย. 2024
  • Assemble this XS Power Batteries Lithium battery with me 😎
    We do not own the rights to the music being played. All songs being used for promotional use only. No Copyright Infringement intended.
    Only @ Simplicity Creations 🇹🇹😁
    Contact Adrian 📞 716-8237 😎🇹🇹

ความคิดเห็น • 18

  • @SlamryCamry19
    @SlamryCamry19 5 หลายเดือนก่อน +1

    Nice looking battery and powerful BUT you should NEVER use a power tool when assembling these batteries or any other type of cells it will damage the cells by either stripping them or pulling on the terminals and stretching them from the cells especially when they are super tight from the power tool and the bass starts shaking it use a socket wrench the cells only need 7lbs of tourqe

    • @SimplicityCreations
      @SimplicityCreations  5 หลายเดือนก่อน

      The drill have a torque setting of 70lbs on its lowest. I have been doing this since 2019 and I never had any issues

    • @pikicustoms4628
      @pikicustoms4628 หลายเดือนก่อน

      I’ll go with a baby torque wrench route peace of mind I don’t mess around with voltage . Don’t give any chances.

  • @5885ronny
    @5885ronny 9 หลายเดือนก่อน

    Hallo sieht gut aus 👍🤗 habe auch LTO Zellen 50 Kwh

  • @makatracytamale3583
    @makatracytamale3583 6 หลายเดือนก่อน

    Good 1 my Brother 💯💯💯 just the question what balance you gona use? Cheers

    • @SimplicityCreations
      @SimplicityCreations  5 หลายเดือนก่อน

      Good day man, I’m using the CES balancer.

  • @Elsúpercivic2.0
    @Elsúpercivic2.0 7 หลายเดือนก่อน

    Hello, good morning, I would like to know what size those bus bars are, please.??

  • @omarowilliams5291
    @omarowilliams5291 8 หลายเดือนก่อน

    That's good for how many wattage for audio system

    • @SimplicityCreations
      @SimplicityCreations  5 หลายเดือนก่อน

      This would do around 20,000rms

    • @fleetwood9142
      @fleetwood9142 4 หลายเดือนก่อน

      How much is something like that..​@SimplicityCreations

  • @carloscssj
    @carloscssj 6 หลายเดือนก่อน

    What is the material and thickness used in this busbar?

  • @stevenstuart4813
    @stevenstuart4813 ปีที่แล้ว

    Just curious. How many banks do you need on 30,000 watts ?

    • @SlamryCamry19
      @SlamryCamry19 5 หลายเดือนก่อน

      You would need at least 4-6 banks with that many watts your pulling thousands of amps your better off running something with a better c rating like SCIB 2.9AH or the 10AH cells from Striko or if you don't want to build it yourself check out NORTHWEST LITHIUM or COVENTRY

    • @SimplicityCreations
      @SimplicityCreations  5 หลายเดือนก่อน

      Around 6 banks with an upgraded 370amp alternator

    • @stevenstuart4813
      @stevenstuart4813 5 หลายเดือนก่อน

      @@SimplicityCreations I got two 400 Mecman alts

  • @PlutoAutoSound
    @PlutoAutoSound 12 วันที่ผ่านมา

    Videos like these, make me want to learn from you and only you because you explained it so well 🥲🤣