The One Thing Every Miata Needs.
ฝัง
- เผยแพร่เมื่อ 16 ก.ค. 2017
- www.thecarpassionchannel.com/r...
MUSIC
Chuki Beats - Old School Mix
• Real Chill Old School ...
-Desmeon - Back From The Dead [NCS Release]
• Desmeon - Back From Th...
Desmeon Social Media -
• / iamdesmeon
• / desmeon
• / iamdesmeon
• / iamdesmeon - ยานยนต์และพาหนะ
![THE TOYS x NONT TANONT - ดอกไม้ที่รอฝน (spring) [Official MV]](http://i.ytimg.com/vi/pPa1d5cC8M4/mqdefault.jpg)
![Is A TCM Racing Top Streetable? Full Build Process [Project 2SJ Ep9]](/img/n.gif)
Thank you for the awesome video Greg! This is my next mod.
Tom's Turbo Garage whoaaaa two prophets meet
Nope I know, I can't believe they met.
I cant believe you don't have a rollbar in that monster. lol.
I was honestly surprised it wasn't part of the original build
Would love to see "Turbo Lego Man Tom", And "Car VVT Passion Channel" collaborate !
One small criticism: If you drill a hole or make a cut you should always put on some paint to prevent it from rusting. I usually use some zinc-spray if the color is not important because it dries really fast. Such small holes can lead to some really nasty rust problems a few years in the future.
It is also a good idea to put some grease or cavity wax(I hope this is the right word^^) between washers and the big mounting plates and the chassis to prevent water from getting in.
Marcel Pursche Thats what I thought too!
Good call. I like how you think. IM Communist Canada rust is mandatory.
Thanks for the tip
And put the bolts through from the bottom so you can visibly see later on if bolts snap.
Highly recommend this mod. The once floppy rear-end felt new again after this mod. As an added bonus, you don't get decapitated if you roll it.
lol
But what about cracking your head on the bar if you get rear ended? 🤔 Which it is more likely to get rear ended then roll over in this car.
@@suavecito_o7927 New seats.
@@suavecito_o7927 true, its only a 10% of rolling over in a Miata
Thanks so much for this. My teenage son and I put one in his Miata, it went in smoothly thanks to your detailed and helpful video. Great father/son project. No discovery learning.
I wish i had a dad like you
Can you please be my dad? You can give your son to my birth father if you don't want too many sons
"He gets a little bit crazy" damn Greg why ya gotta downplay my accomplishments like that
lmao nice channel
I'm glad these videos are still up and helping out numerous Miata owners like me! My next project is to install a Hard Dog bar in my 01 LS. Love the channel and the videos. Thanks!
Love how every video you do happens to coincide with the project I'm doing the following weekend
would also recommend throwing some spray paint into the drilled holes(especially for yakees)
Yesterday I was searching your channel for a roll-bar how to and today I wake up to this glorious video. Thanks Greg!
I just bought a black bird GT3 roll bar tonight... SO much more expensive- but from what I've seen and read, SO much better quality than what Hard Dog has to offer. So excited!!!
Definitely at the top of my "to-do" list! Thanks for proving that this can be a 1 man job.
I watched the whole video and dont even got a MX 5 :D ! nice video dude greetings from Germany :)
Ich auch, aber bald...
A ballcock shank washer?
I subscribed to Greg's channel when I found this video soon after I got my 91. The editing around the small details, the trim clips, etc is great. BTW great t-shirt.
I see more rain in your videos than I did the entire 3 years I lived there as a kid.
100% chance of rain tonight, lol.
Thanks for making this man! Roll bar is on my list for my Miata. Finally got my new top and fly wheel showing up really soon. Still need to get coil overs, wheels and roll bar for sure. Cant wait to see more videos, keep up the awesome work! :)
Finally an NB!
I think this is the one thing you can do to any miata and it won't hurt its resell value. Great looking kit!
rambow70 it will hurt it if it’s not done properly....
Prepping to install the Ace Bar in my '99 MX5. Great Instructions! Love your sense of humour! Thanks
Got my roll bar in least night thanks to your guidance 🙌 always much appreciated Creg
Incredible video, thank you for making this. Clear, detailed, and to the point.
This channel is highly underrated. Very helpful videos, keep it up!.
My TR Lane GPV arrived just yesterday, this video helps a lot as it's almost the same. Thx dude!
what a perfect time to release this video as I just ordered a roll bar yesterday
That drill bit rig was hilarious lmao. Dope Tapatio shirt too.
I have an emerald green 2000 NB! I need to put a rollbar in it already... Nice video, Greg! Makes Mondays just a little bit more enjoyable.
This is awesome Greg! Planning to get my own roll bar soon! Thanks so much!!
Great video! Most videos only cover half of what you mentioned. I'm thinking about getting me a roll bar for a while already but they're so expensive.
Thanks so much for making this! Planning on installing mine within the month. Perfect timing!
These videos are amazing! Keep em coming Greg
Great content. And what a good way to show all of that goes into the design of a car.
Great video as always man. You make everything look easy!
Again! Such fantastic content! Next purchase for my NB2 for sure!
Great video 👍
I am wondering whether the seatbelts are working fine after changing the top bolt position ?
Did it has an impact on how smoothly it rewinds ?
Love you vids man! Wish you uploaded more often. Ever considered starting a Miata car club ? You could get more content. Hoon with the homies. Squad up! 😂
Hey thanks for the video, helped big time! How did you tighten the 6 bolts on the upper back plates? I can't seem to hand tighten them with a socket wrench, it's just super hard to turn. Did you use a drill or something to tighten them down?
Could you tell the sub category of hard dog roll bar you installed? There’s a lot of different ones. Love the channel bruh. Your the reason I bought a Miata, and I couldn’t be happier!
Only need to drill one hole from the top and use the backing plate for the other holes as template from the bottom. I also like to add a RTV seal around the bolt holes on the backing plate to prevent water intrusion.
Great video thanks. What make/model bar did you use.
Looks like you don't have any problems with the glass rear window.
Sick job bro!!! love your content.
Nice video, I just got an 01 miata and it think it has the same roll bar, only issue is the top seat belt harness/roller was never removed so the seatbelt doesn’t retract easily-_- I noticed you had a long bolt and spacer for support at the top of the seatbelt mounting, do you know where I can get that bolt/washer/spacer combo? I’m assuming I gotta loosen the whole roll bar to relocate that seat belt. Thanks!
THank You! You just showed me something I didn't know I needed!
Hey Greg, I'm getting a hard dog rollbar soon and was wondering if instead of bolting in all the spots you bolted, could i instead weld the plates onto the car? disregarding that i wont be able to remove it
PROTIP: Rent or borrow an impact gun, and not just for drilling. The nuts are all lock nuts, which is great for having them not back out over time, but a pain in the ass to install if you have to tighten them with a 6" socket and a box wrench.
This looks like an M1 sport bar(?). The install is different for each of their models as I found when installing my Ace and tried to use this video as a guide (mainly when it comes to front holes near the seatbelt tower, this mounted in front of it while mine mounts on the side. Also had to cut more out of the shelf and in a different area). Still gave me a good idea of what to expect, though.
had an oldschool carpassionchannel vibe. liked it mucho
+tehpillemannerator I thought so too haha. I'm like wow anything outside the engine studio just feels ghetto now
Nice video. I'm glad I have my rollbar in already cause watching this video reminded me of how much of a pain it was to install
Yep, I wish mine went in that easy... I went with the M2 Hard Core Hardtop double diagonal.
Yeah it took me like a whole day to do it. I have a blackbird fabworx rollbar so there were a couple spacers I had to grind down. I only had an angle grinder and pliers so it took like an hour just to do that
+Patrick I REALLY do not enjoy installing roll bars.
Nice looking bar. Lots of work.
Wooh that was rough, but entertaining. Seemed like more work then the bar I put in my s2000.
have you dealt with the seatbelt getting stuck after install the seatbelt reel back on?
I sure would like to see you do more wrenching on an NB, particularly a 99 model :-)
Hey greg i live in Europe and im 1,90cm about 6.2 and im still growing and i love miata's but will it be enough so i can fit in?
What is the purpose of the black tube spacer and dish washer that goes next to the seatbelt hole? The rest of my bar is in but I cannot find a use for it.
Hey Greg i believe those rear tires on the NB are on backwards. It looks like the rotational tires need swapped. :)
I have a 2004 Mazda Miata LS with a Bose speaker package. I have the little Bose speaker set up behind the seats. Will that interfere with a roll bar? Thank you in advance.
Love it! Nice work.
this music is lit just like that shirt lol and have you tried chicken instant ramen with tapatio and limon it's so good!
That looks exactly like my car! Same year, color, and wheels. Dang.
Oh man I thought that was the replacement for B&B... how does that install work with the hardtop? Nice work BTW, keep it up G.
Mark
hmm, i've taken more of those out than installed them. If not doing crazy driving, there's a lot of negatives having that roll bar behind. Most of them barely allow the top to be folded down. And if it has a glass rear window, it definitely won't allow it to fold down and stow. They also eat up a lot of the room behind the seats, so limited capacity.
i live about 30 minutes away from where hard dog is based in King North Carolina. great people at their unassuming garage. they let me pick up my roll bar straight from them! would recommend hard dog to anyone!
Well done. The video was edited to be exactly what was needed for the install.
Would you make a video on NB Passenger Airbag Module replacement
Holy rust batman!. Great video!
rockin the tapatio shirt! 😂😂
What model impact wrench is that?
Hey nice...how long did that Take? Good job on explanation...
Nice work man, but you should get a cut off wheel/die grinder. Cleaner sheet metal cuts, but I'm sure you know that. Thanks for the quality vids.
this is excellent! thanks for this
Is it the camera angle or did he come *this* close to scratching the paint with the rollbar during the intro?
Does this have a glass rear window?
great video man, thanks so much!
Dope beats in this video.
I drive an nbfl or 2.5, I always wonder how they feel different or the same as the NA miata? Since I never drove both.
They're quite similar since they are essentially the same car. NA steering feels slightly better but the NB chassis feels more solid to me. I personally picked up a 10AE NB after driving about 10 different NAs, NB1s, and NBFLs. It felt best to me and I also liked the six-speed. I also couldn't find a really good example of an NA, all had something wrong with them.
Dude where do you get the dope beats?
GOOD JOB! Well done!
Love that shirt man
Nice job on that Roll Bar, looks good quality. Would be nice to have. Enjoy your videos and have helped me install many parts recently. Thanks for sharing
you had me with the Tapatio Tee shirt.. awsome..
Dude that shirt tho! Tapatío on point!
another great video thank you
don't talk to me or my boss' son ever again
ooh. nice. i need to get me a rollbar for my NB MX5!
I need to go back and fix mine this weekend😅
Whats the reasoning behind the owner getting the single-diagonal over the double diagonal or the "x" bars? I got an M1 hardcore hardbar for my NA8 with the "x" pattern because I felt it is the safest design of the available patterns because in the case of a roll the hit would be spread along the bar a bit more evenly. Just my thoughts on that. Thanks :)
+Guerrin Love Just a little better visibility, but stronger than not having any diagonal.
I swear I've seen you around. Are you in Contra Costa County?
Where do you work greg
I've bought my first miata (NBFL) and I'm still considering if rollbar is really the first thing I should do. What are the cons of having one if any?
+22letis22 A little less space in the car, a little less visibility.
Great video !!
Hey Greg, what kind of Roll bar is in your red Miata? I'm literally wanting to order a roll bar in the next 30 minutes! I'm looking at the Hard dog M2 sport with double diagnals for my Nb, says it works with soft and hard tops and it's taller than the hard top only version., but I noticed that ones 1.5" tubing and not 1-3/4" like the one for the hard top version.
Do you know of any roll bars that would be better than the hardcore M2 sport with double diagonals before I pull the trigger on this one? I'm sure it's definitely better than nothing though.
Good thing I read comments quick 😳 my bar is a Hardcore X-Brace but I can never remember if it's M1 or 2... And it's the hardtop specific version. I also have the Hard Dog bolt-in harness bar
Greg you need to buy you one of those electric wrachets,
Greg! Axle stands on mud! Oooosh! Knew a man who got crushed under a car doing that!careful bro !
I've done some research and a lot of people say that rollbars are actually less safe for daily driven Miatas than not having one. I guess the fear is getting rear ended and crushing your skull against the metal bar. I saw people saying that even with the addition of foam padding it wouldn't really be enough to cushion your head without a helmet. I suppose one has to figure whether rolling over or getting rear ended is more likely. I'd like to know your thoughts on this, because I only did a little bit of research on the subject and it scared me out of installing a rollbar on my NA.
It depends, I put aftermarket seats on my Miata and my head doesn’t go pass the seat. Might be a tall person problem .
That tapatio shirt is legit bruh! I gotta get me one.
How do you put the roof up while seated, after the install
LMAO i was wondering the same thing
Love the shirt boss
great vid! what size drill bit did you use?
DoctorAsian 3/8"
around how much time does it take to do this install? I'm now really interested in adding one to mine! btw love the Tapatio shirt.
+Fam4sta Give yourself an entire day. It's not a quick install; even after doing 3 it's still about my least favorite part to install. But the results are so worth it.
waiting for Greg's new vids just as a hardcore fan awaits for new GoT series :D
good shit greg
great video!