ฝัง
- เผยแพร่เมื่อ 22 พ.ค. 2020
- The most cost effective way to add rear speakers to your Harley Davidson Bagger while maintaining a factory look and weather proof . The @rockfordfosgate
Tms69bl14 ( 2014 and up ) TMS69bl9813 ( 2013 and down ) kit is super high quality with a great fit and finish .
#harleydavidson #loudbaggers #nvs #nvsaudio #rockfordfosgate #bagger - ยานยนต์และพาหนะ
![[4K] BABYMONSTER(베이비몬스터) “FOREVER” Band LIVE Concert “영원히” 베몬만을 사랑하게 되…💗 [it’s KPOP LIVE 잇츠라이브]](http://i.ytimg.com/vi/TQfC0xdpiw4/mqdefault.jpg)
You're a very good teacher. Most arent as thorough when explaining installs and it makes a big difference. Thank you! I appreciate this bro.
Shure do wish you had a shop in the Dallas area, nice to watch someone that knows what they're doing. Cheers!
Thank you.. I did install them and a DSP, incredible sound and saved over $1,200 by doing it myself. HD wanted $2,400 for the install not including the AMP and 6.5 front speakers. I did also add the Soundigital 800.4 and Hertz SPL 6.5 and WOW!!!! Thank you Carlos....
Excellent video! Thanks for all the tips and techniques to make this job come out great!
Great video brother thanks ! Will be doing mine also.
Great Video. you tell the true!
Nice
You can use a wood cutting blade that will also keep it from fusing together
Great video Carlos. Quick question. Have you installed Diamond audio MS69CX in this kit? I saw another video where a guy used spacers and the other modified the speaker by grinding the corner to fit the inner bracket of the speaker kit.
Hi there great video. Couple
Of questions. Are those Rockford speakers a descent speaker. Other question is if you do get caught in a rain storm will water leak into the bag ?? Thanks
Where can I get the cut template for the Rockford 6x9 kit?
@NVSAUDIO HEY THANK U FOR YOUR CONTENTS. QUESTION. CAN I USE THIS RF KIT ON MY 2021 STREETGLIDE SPECIAL LiDS?
I recently installed this kit on my motorcycle. This is my second time installing a set. I have one small issue with the install. The 3/4 inch screws that mount the speaker and basket are too short. Yes, they work. BUT you will get about 3 threads gripping plastic.
If you want to prove it to yourself install the speakers without the basket. In mechanical engineering terminology they don't have the grip length correct.
I went to Home Depot for some 1 inch screws and installed the basket.
What do you suggest comparing the new 14sub kit from rockford?
I went to Sturgis and was quoted $4700.00 for stage 3 and dual 10' sub kit w/400&800 watt amps
Thanks for these videos
Curious as to where you route the wires coming from the bag to the amp? Going to do this and don't have a clue as to the best place to do so?
Hey brother I got a bagger and I bought some atv speakers from Walmart and stuck them in my lids and not getting the punch I want I went and bought a 600 watt amp just for them and still not getting punch should I just add a 8 or a 10 the atv speaker are mid not coaxial I swear when I have the lids open lil they punch pretty good so idk what u think?
Do u have video or pictures of that on a lid with electric locks? I appreciate all your videos and it help a lot of us guys who like DYI.
I have a Cvo in the bay now with electric locks
I’ll
See if I can snap some pictures in the morning.
Email me
Nvsaudio@gmail.com
@@NVSAUDIO i appreciate it really do sir 🙏👍
@@NVSAUDIO any chance about the pictures? Email sent
awesome tutorial video bud. one question i have. how the grill and speaker holds in place? do the screw on and sandwich the lid? didnt see that on the video. thank you.
The grill
Sandwiches the lid with a gasket
Then the 6x9 screws to the bottom part of the sandwich
@@NVSAUDIO awesome bud, thanks a lot. i got a mess up colour, candy orange, and afraid of ordering advant black. think this is the way to go to add more speakers to my roadglide.
Hi my friend ! I need help, i have this bike with rear speakers, and amplifier and 54amp stator with rectifier… but charging 13 volt !!! On stop… i dont under stand, your bike is ok with this configuration ? Or my bike is bad ? Tks for your help, i am very desperate
Wish I would have saw this video first before I did mine
Rober haskle from nvs audio,what is the warranty?
Can I get just a kit with the grills ,adapters and the cut out template. I don’t need the speakers tho ?? Tks
Does this Rockford kit fit 05 ultra classic???
Do you install speakers and amps in non Harley bikes?
nice work as always. question the guys that are running subs say they seal the bags... hows is that done?
I have a video coming up on that
@@NVSAUDIO thanks.. video was great
Will this work on low rider st ?
Im told I cant do this at all, with a 2015 CVO's Ultras electric locks.
Did you you say 7x10? How's that fit?
Hey so I have this kit front and rear speakers and love the sound quality plus it’s waterproof but is it possible to add let’s say diamond audio 6x9s in the same kit. Im asking because I’m getting 2 8” diamond audio mid range or sub speakers in my saddle bags
19 rgs
Carlos. I brought this kit for my 2010 ultra classic. And i brought the GZ 7x10 to replace the fosgate speakers. I was told that the GZ would go right in using the adaptor provided. My audio guy said he could get them to fit. (I think he was being lazy). How hard will it be for me to put them in myself
M Kane the grinding is a little tricky. I don’t blame him , I hate putting 7x10s in a 6x9 lid . It’s quite a bit of grinding to make them fit plus you have to remove the rubber cap on the magnet so the lid will close and it still hits a little .
Can you use Diamond MS69CX with this kit? I saw one of your videos where you had to use spacers to complete the install.
If you use spacers you don’t have to cut or grind anything they fit perfectly
@@NVSAUDIO I'm sorry for my ignorance to this I'm new to this. So after I use the template to cut the hole all I need to do is use the spacers and mount the MS65CX speakers? Where can I find the spacers if that's the case?
@@dwashington4391 correct.
We sell them for $50 shipped
And American hard bags also sells them
I looked at this kit hoping to convert my CVO 5v7 lids to 6x9. RF grill is smaller than the CVO stock grills so it won't work. Hoping to avoid the adapter route. Anything out there that you'd recommend? A cut-in kit that would be a larger cut-out/grill space than the original opening.
American Hardbag.com has 5x7 to 6x9 conversion kit for OEM Cvo speaker lids. Enter 5x7 to 6x9 in the Search engine on their website. If you don't see what you like there try garage bagger stereo website.
Anthony De Lucia, Jr. I’m not a big fan of converting the 5x7 to a 6x9 . The adapter makes the 6x9 sit really low in the bag plus it lets water in . Here at the shop we make custom plates at convert the 5x7 to a 6.5 .
Or we just drop in a Beyma 5.25 ( almost a drop in fit )
can i buy just the cut out kit ?
Can you just buy the lid template and speaker bracket without the RF 6x9’s? Not really sure about the small magnets on the RF 6x9’s.
Maestro Raheem no . I wish you could be they don’t sell them separately.
Hey Carlos is it possible to have this kit and swap out the rockford 6x9s for hertz or diamonds and it still be flush and water tight
Keith Sweat yes , we do it all the time . Works best with the hertz neos .
And its still water proof?
Ever heard of putting speakers in leather covered Viking saddlebag lids
No sir
Nice work but sound was shaky
Can you use a dremel to make the cut on the kit?
Yes but I hope you have a steady hand . The dremel spins fast and it hard to control.
I definitely recommend a cheap jig saw
Sound like your not a fan of the Rockford speakers.lol.. nice work... do any other company make a kit for a roadking blue tooth controlled?
I love Rockford Fosgate products
My issues is with their 6.5 inch motorcycles speakers and the fact that their amp is only 400 watts . The fit and finish of the to Rockford kit is second to none , I just wish they offered 2 levels .
What they have now is a level 1
I would love to see a level 2 with a 800 watt or 1200 watt amp , a waterproof dsp and more powerful speakers .
I love their 6x9s
I love the quality of their amps just need more power
@@NVSAUDIO ok yea I remember hearing you say that on your video.... and you recommend another brand for the lowers/front.... I just ordered the Rockford kit two 6x9 maybe I can upgrade later...
@@NVSAUDIO will I need a DPS I’ll be using my iPhone to play my music
@@Tom-jw1pe I always recommend a dsp
are u honing to do a 702 kit review
There kit is exactly the same
As the Aquatic kit .
Same
High quality as the Rockford kit
Looking to do cut ins on lids but dont wanta go with rockford. Any suggestions?
Klock37 use the Rockford kit to and swap the speakers out . We do it all
The time
We normally run hertz Neo 6x9 or mmats in the Rockford lid kit .
Dirty bird makes a lid kit too but I like the Rockford better
@@NVSAUDIO thanks just watched the video
Im wondering the same thing as ken. I dont want the Rockford speakers. Is it possible to send you the lids for you to cut and install the hertz or polk audio without getting the Rockford speakers??
mr smith yes
ok, I'm going to disagree with you here about flush or not flush, as that is not a flush fitting kit as the grill sits on top of the bag lids
You microphone keeps going in and out I wish the audio was better about to do this to my motorcycle
are you open tomorrow
Yes
@@NVSAUDIO if it dont rain i'll stop buy think my gps address is right
Can i just send my lids to you and have you install the kit
Marcus Shelby yes
@@NVSAUDIO ill be callimg you soon
How much would total price of kit and install be please
Marcus Shelby email me . Nvsaudio@gmail.com
just remove the latches...literally 1 screw on each lid