Had my KE's wifi just die after months of perfect printing, completely refused to bring the wifi back up after multiple reboots. Reflashing the firmware fixed it right up, no fuss, no muss. Now to re-root it, reinstall Moonraker and Mainsail and get back to obsessively printing. Thank you so very very much.
Thank you Man. This recovered my printer. I was going to buy a new mainborad before I found your video and now, 20 min later I'm already printing again.
For those having problems with the unsigned drivers, you'll need to boot windows in recovery mode (Shift + Restart) and then Troubleshoot > Advanced Options > Start-up Settings and press Restart Then on the Startup Settings, press 7 to select Disable Driver Signature Enforcement. This will restart your Windows and you would be able to install unsigned drivers
I made most classic mistake, rm command on / directory and I just wanted to remove mainsail because it stopped working. Recovery successful. Thank you.
Não tenho palavras para agradecer seu vídeo. Eu iria gastar um valor alto para recuperar minha impressora, além do tempo que ela ficaria parada. Muito feliz. Muito Obrigado.💯
Thank you very much for this video. I'm so glad for your help, because I was disappointed with my bricked machine! Now, it's working again! God bless your life, bro!
Bricked ender3ke : check Windows pc: check let's goo Already had orca working with fluidd and non creality camera. Then moonraker could not update. Tried to reinstall it with creality helper, then the OS packages disapeared :D well at least it is easier to unbrick then most phones, thanks
I was doing great until I couldn’t get anything to show in device manager or hear the sound. Any advice? I tried several cable (regular usb into the computer correct?) is there any place to try an micro sd card? I think I’m totally bricked though. My screen even looked like tiny bricks lol
hey thanks for the instructions but what do we do if we get an error when it is writing the recovery firmware back into the board after doing the start sequence the second time? it says "50%stage run err"
I just got my Nebula Pad kit today and have been used to using Klipper on my Ender 3 V3 SE using a Raspberry Pi. But I missed using the screen for setting temperature and loading/unloading filament since my PC is across the room. So noting how the Nebula Pad was locked down (Isn't Klipper supposed to be 100% open source??), I rooted the Nebula pad and everything was peachy until I changed the root password. D'oh! Stuck in a reboot loop and the firmware update process via USB A didn't work. However, now I can't seem to get the .img file with either ther Creality or rooted firmware to load.
7 หลายเดือนก่อน +1
Thank you!!! Now I just need to know, how to prevent this in the future. Which upgrade caused this? Firmware? Klipper?
many thanks for the video. after u said u need to diasable touchpad i just switched the touchpad of my second ender 3 ke which had hotend isuues anddd voila! its back now haha :D. will disasable the broken one after i fix the hotend
I have any cube cobra Max and I did a zombie update firmware now it’s bricked. What should I do? If you don’t mind helping the nozzle in the bed won’t do anything or LED light no more head?
So we recovered the display, the part where klipper lives? And firmware update on the display device is only on the display device, not the internal pcb inside the printer? I am trying to understand this right..
It was saying something along the lines of failure to install driver. Windows deemed it unsafe. I'm not sure. Think it was my pc problem. Moved to a different pc and worked just fine. I appreciate the help.
That one point where you faded out from one video to another was a little confusing with your voice overlapping. Where did you get that blue mat you are working over? I like all the built-in trays and things on it. I hope your cough gets better. If it's related to allergies like mine then I feel for you as this is the time of suck...
You are kidding, it would be to easy to put the links into the description, on the other hand it will require those that really want to re-flash the firmware to think before doing, you know preventing wanner-be firmware flashers form shooting them-self in the feet just because it is to easy.
Had my KE's wifi just die after months of perfect printing, completely refused to bring the wifi back up after multiple reboots. Reflashing the firmware fixed it right up, no fuss, no muss. Now to re-root it, reinstall Moonraker and Mainsail and get back to obsessively printing. Thank you so very very much.
The same thing happened to mine, been printing fine for over 6 months, I think it was the fluid update.
@@Maginaz Pretty sure mine was an failed system update a few days prior.
Thank you Man. This recovered my printer. I was going to buy a new mainborad before I found your video and now, 20 min later I'm already printing again.
For those having problems with the unsigned drivers, you'll need to boot windows in recovery mode (Shift + Restart) and then Troubleshoot > Advanced Options > Start-up Settings and press Restart
Then on the Startup Settings, press 7 to select Disable Driver Signature Enforcement. This will restart your Windows and you would be able to install unsigned drivers
Thank you, this appears to be an issue for Windows 11.
I made most classic mistake, rm command on / directory and I just wanted to remove mainsail because it stopped working. Recovery successful. Thank you.
Ooooooh please a reverence for this Sir. Great job and great explanation. Thank you so much Master.
true total life saver thankyou sooo soo much
Thanks man, I had to bypass driver signature, but finally it worked!
Não tenho palavras para agradecer seu vídeo. Eu iria gastar um valor alto para recuperar minha impressora, além do tempo que ela ficaria parada.
Muito feliz. Muito Obrigado.💯
Thank you so much! absolute legend!!
Thank you! Bricked mine and this was the fix that I needed!
Thank you very much for this video. I'm so glad for your help, because I was disappointed with my bricked machine! Now, it's working again! God bless your life, bro!
OMG you just saved my printer! thank you so much!!!
Ah Good! Now I can stop worrying about bricking it.
life saver :) Please post more stuff!
When screwing into an existing plastic thread, turn backwards until you hear a click and then go forward. Keeps the screw from cutting another thread.
Bricked ender3ke : check
Windows pc: check
let's goo
Already had orca working with fluidd and non creality camera. Then moonraker could not update. Tried to reinstall it with creality helper, then the OS packages disapeared :D well at least it is easier to unbrick then most phones, thanks
best guy ever and so funny
Thank you, it helped me
I was doing great until I couldn’t get anything to show in device manager or hear the sound. Any advice? I tried several cable (regular usb into the computer correct?) is there any place to try an micro sd card? I think I’m totally bricked though. My screen even looked like tiny bricks lol
I literally got a fully upgraded 3d printer this way. Old user probably spent more than $500, I got it for $150. 20 minutes later, printing again!
hey thanks for the instructions but what do we do if we get an error when it is writing the recovery firmware back into the board after doing the start sequence the second time? it says "50%stage run err"
I just got my Nebula Pad kit today and have been used to using Klipper on my Ender 3 V3 SE using a Raspberry Pi. But I missed using the screen for setting temperature and loading/unloading filament since my PC is across the room. So noting how the Nebula Pad was locked down (Isn't Klipper supposed to be 100% open source??), I rooted the Nebula pad and everything was peachy until I changed the root password. D'oh! Stuck in a reboot loop and the firmware update process via USB A didn't work. However, now I can't seem to get the .img file with either ther Creality or rooted firmware to load.
Thank you!!! Now I just need to know, how to prevent this in the future. Which upgrade caused this? Firmware? Klipper?
thank you. helped a lot!
many thanks for the video. after u said u need to diasable touchpad i just switched the touchpad of my second ender 3 ke which had hotend isuues anddd voila! its back now haha :D. will disasable the broken one after i fix the hotend
Do you know how to unbrick a ender 3 S1 pro
I got all the way to start burner. nothing runs by. Can you help??
I have any cube cobra Max and I did a zombie update firmware now it’s bricked. What should I do? If you don’t mind helping the nozzle in the bed won’t do anything or LED light no more head?
and when i plug it in and do the button thing and nothing works after 10 attempts?
Fan D**M tastic! Great work. Thank You.
So we recovered the display, the part where klipper lives? And firmware update on the display device is only on the display device, not the internal pcb inside the printer?
I am trying to understand this right..
on the KE it all lives there
Mine isnt doing anytbing on the USB cloner part 😓 and yes i did the button thing and heard the sound saying its connected... Plz help
Did you get it working? Mine isnt doing anything either
usb cloner device appears with a exclamation point in device manager? any ideas?
When you pull up the properties on the device, what does it say under Device Status?
@@hotfix7387I have the same issue, it says a digital signature cannot be checked/controlled. (in dutch for me)
@@hotfix7387I have the same issue, it says windows can't verify the digital signature (code 52)
It was saying something along the lines of failure to install driver. Windows deemed it unsafe. I'm not sure. Think it was my pc problem. Moved to a different pc and worked just fine. I appreciate the help.
I just tried to recover and im getting an error saying device attached to system not working
Install the drivers :)
just use a micro sd card/ sd card to load fresh firmware onto it
Won’t work if the thing is totally bricked :). But yes that is an option if it’s just corrupt
How did you do this?
That one point where you faded out from one video to another was a little confusing with your voice overlapping.
Where did you get that blue mat you are working over? I like all the built-in trays and things on it.
I hope your cough gets better. If it's related to allergies like mine then I feel for you as this is the time of suck...
Thanks, I got the mat online years ago, I don't quite remember where but you can google for them :)
please, link here the site to dl firmware, drivers and cloners.... tnx
You are kidding, it would be to easy to put the links into the description, on the other hand it will require those that really want to re-flash the firmware to think before doing, you know preventing wanner-be firmware flashers form shooting them-self in the feet just because it is to easy.