DIY 2 x 72 belt grinder part 1
ฝัง
- เผยแพร่เมื่อ 28 ส.ค. 2024
- I Decided it was time to build my 2" x 72" belt grinder. Started off with 2.5" tube steel and some .25" steel plate steel to build the frame and base. Next video will be the platen attachment and the roller tracking arm.
First video ever edited and shot by myself. So let me know if you would like to see more or less of something in particular!
I hope you enjoy the video!
Like and subscribe! - แนวปฏิบัติและการใช้ชีวิต
![DIY 2x72 Belt Grinder Build [FREE PLANS]](http://i.ytimg.com/vi/cAH3LldBWd0/mqdefault.jpg)
![[TH] 2024 PMSL SEA W3D1 | Fall | สัปดาห์ตัดสิน ทีมไปไฟนอล](http://i.ytimg.com/vi/ZBU3GyzqErI/mqdefault.jpg)
If you would clean off the mill scale with a buffing pad, your welds would run smoother and not have as much porosity. Using acetone is more for cleaning aluminum too rather than A500 material. Out of all the boiler tube that I have welded over the years, a buffing wheel on a Patco and flapper wheel on a 90 die grinder did the trick.
Man I love how clean your shop floor is.... You have a nice setup there.
Hey
U
H
It is fortunate for you that you are a far better fabricator than video editor. Nice build.
Nicely done Chris, always remember every time you see a thumbs down, as a fabricator you’ve spark some kind of idea on how they could do it better! Sadly most won’t try. Thanks for helping us continue to learn! Can’t wait to see more. ( no one can say they missed taking of all the mill scale when fabricating Fixtures)👍
Good project to practice with my everlast tig welder.
Your set up is fire! Thanks for sharing.
Your video is the most understandable and pure video around all belt grinder zamazingo. Also your machine is very simple.
I'll make one of these. Thanks!
Edit. My project is on final stage. I'll post when its finished.
The clip is very useful. Excellent. I will keep following you.
Good idea
Very good project. I just might make my own wtih my everlast welder this summer.
Alex Rodríguez ggf
Amazing creation! thanks for your idea
God tig welding looks so much fun and better than mig. I wish I had a tig setup lol
Bravo pour ton travail mec, je sais à quel point ce n'est pas facile et long de filmer et travailler.
Should be a "how to tig weld video lol!"
Thanks for this video started making my own today
Great, just what we need. Another video where no one says a word. And we thought silent movies were history.
Media hora perdi viendo a este sabio
Nice work. I’m getting ready to build one of these for myself. I look forward to more projects from your channel.
cflinger1979 thanks buddy! I just got a chance to work on it again tonight. Runs like a champ! Next video should be out this weekend. Happy Thanksgiving!
cflinger1979 from my
Thanks for show how & sharing that
21:10 is that a mill or a drill press? I’ve got access to a Cnc mill but it’s massive and a bit excessive for this if that’s just a drill press with a fancy vise
Не понять иностранцев то нержавейку электродом варят ,то толстостенный металл аргоном
Holy red sparks, Batman (3:50). Is this some kind of fancy tool steel? Wikipedia says high nickle and cobalt alloys make sparks like that.
If your not going to clean the steel before you gtaw weld it, get some stainless filler.. same tensile strenght, less ugly welds..
Merci pour ta vidéo t’ai super
Im not very familiar with tig welding. What is the tool you put the tip into?
С таким оборудованием любой так сможет!
Just a question. Why the stacked tube design? I see this a lot but I never see a use for the bottom tube.
Eu também estou tentando fazer uma .
Where did you pick up that Fancy Tungsten grinder?
Buy 3M Cubitron II cutting disc. Osome to Heavy Jobs.
Enjoyed watching
Peter Coppock Gracias!
Nice work!
Could you please share where I can get that smart ass mini tungsten sharpening tool?
Thanks! Sharpie SD™ 20° Fixed Grind Angle which i purchased from Arc-Zone.
You took me by surprised when you used the diamond disc on metal haha
Killber Amazuki it specifically said lasts 50x longer for use on metal! But they lied
Do you have a detailed drawing? Please, I'm in Vietnam Thank you.
I am sorry I do not. Check out DCknives blog. His is how I designed mine.
for the main frame of the grinder If I use 2"x2"x1/4" square tubing, What is the best fitting tube to slide into the 2x2x1/4??? I assume a 1-1/2"x1-1/2" square tubing. I want the tubes to fit together with very little wiggle room. Is the 1-1/2"x1-1/2"x3/16" the best fit??? and why? I am thinking that due to the radius that is created by the 2 different square tube would give the ideal "complete" fit? Or is there a better smaller tube that should be used for complete surface area fitting. I am looking for the best precision fit so the tool arm and idler arm does not have any sloppy movement. Thanks!
Jesse Myers I couldn’t find the best suited size for the best fit either. That’s why I had to weld the plates on the side of the smaller tube and mill it down to a precise fit. The only option which I didn’t do because of price is to use cold rolled steel which will allow more precise fitment. Hope this helps
A lot of people use angle welded around the tube with shims made from pop cans. After the set screws are tightened there is no play in the sliding mechanism as the set screws push the inner tube away from one side of the outer tube. If your unhappy with the corner radius a 4 1/2 inch grinder will take care of that. There is zero chance you will be able to get every side to contact each other and still be able to slide the inner tube. That's just an impossibility. You will also develop a deformed side on the inner tubes from the set screws. And yes your table will stay true with the set screws tightened. The welding will warp the table far more than any small movement possible from the tube fit. Steel plate is not perfectly flat brand new either right. Not trying to give you a hard time but maybe a bit of mechanical knowledge before taking on a project like this would be helpfull.
Is it all 2.5" tube?
Is it bad to use cutoff wheels right down to the hub like I do? lol
Nós do canal ferreira motos estamos acompanhando tudo ( torno caseiro) forte abraço de nos do canal ferreira motos 👍👍👍👍👍👍👍👍👍🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷
That snap-on vise is bad a$$!!!
Всё красиво, только объясните, зачем профиль аргоном сваривать?
Thank you. I chose to TIG weld since i am most comfortable with that process.
Просто у него есть аргон. И еще фрезер. И еще куча магнитных уголков для сварки.
@@user-du3lx9fo4i И куча нашего времени. Название ролика про гриндер, а я 20 минут из 24х смотрю на сварщика, причем далеко не высшего уровня.
What welding table is that. I really like it!
delvecchio1971 it’s the Snap on welding workstation KRBC60T.
Plans? Sizes? Just a lot of cutting and grinding.
Ged Reilly the cutting and grinding never end!!😉
hola Chris, si te consulto algo en castellano me contestarías?, soy de Argentina (y no me llevo bien con el traductor), gracias y saludos.😉
Hello, I am building the same type belt grinder...having a hard time finding a 30-36 lb spring! Where did you purchase your compression spring? All info welcome...thanks
Hey Jim, I used a Screen door closing spring that i bought from Home Depot. Works pretty well. I found it in the Hardware section.
Would like to know the materials you used
2:35 that diamond disc wasn't going anywhere... LOL
I thought i was seeing things when i saw that,LOL
I was shocked when he used it haha
You know they make diamond blades for cutting steel, don’t you?
Google DC knives & 2x72 belt grinder for materials and cut sheets.
Always show everything. Even give tool purchase links.
Did you sell that 'cause my husband like it.
Great work! I'd like to build a similar one. What kind of steel did you use?
Alessandro Melis I used hot rolled carbon steel for the entire project. Hot rolled needs a little more prep work. But I didn’t mind since cold rolled is more money and hard to find in the sizes I needed. Also stainless would work if you wanted to.
@@christopherfall9307 thank you so much. Do you think that simple iron could be good as steel?
Alessandro Melis Yes. Should work fine. Just make sure you are able to bevel the edges and get a good filet weld or else it could be brittle.
Great job. I’ll bet your vise cost more than a new sander tho😜
Only the label is expensive, teh rest id maybe 50 bucks. I have the very same vise made by another company and it cost me 50 bucks. Those should be YORK vises, the company that made the Wilton models prior Wilton existed.
Wild Weasel what brand is your vise?
Why tig welding? Just wondering.
It’s the type I am most comfortable with.
No power feeder?
Is there any blueprint you made/have to follow? If there is add the link to a pdf of it, I'd like to see the plans to make my own.
Phantom Beast I bet you didn't get a reply I find that the presenters that don't talk don't reply to questions
@@davidendres7808 after looking at the comments after I posted it, I didn't expect an answer.
Why would anyone with a Snap on vice, a milling machine, tig weld a 2x72 belt sander made of 2.5" tube? Seems more like show and tell.
I made this loosely following the DCknives drawings (dcknives.blogspot.com/p/2-x-72-belt-grinder.html?_sm_au_=iQV27tsZj6vZTk5V) and i apologize for not responding sooner. I never received a notification that you commented.
@@davidendres7808I have replied to most.
У меня полуавтоматом варить красивее выходит,тут прям печаль чёт совсем😑
Да я электродом красивей варю
It hurt me to watch you clean your material with acetone, then tig weld it with the milscale not ground off :(
Brandon Spence you are absolutely right. I am so used to welding stainless that I forgot to grind the scale off. Big oops on my part. Hopefully you didn’t get hurt too bad!
Love the build, what plans did you use? I'd love to make one too and your videos are great.
Nathan Woolhouse thanks so much. The plans I used are loosely based from dcknives.blogspot.com/p/2-x-72-belt-grinder.html?m=1. They seemed to be the most simple ones I found.
Hello Chris, what is the length on the sq. tubing?
Устал смотреть этот геморрой на скорости 2, так и не понял что это было....
Не ты один такой.
Can you tell us the measurements?
Are you use tile cutter to cut metal sheet?
They make metal cutting blades that look like tile cutting blades. I was hesitant to try them at 1st but they work great and last a lot longer than abrasive disk.
Cómo se llama esa herramienta con la que afila el tu ngsteno
Sharpie SD™ 20° Fixed Grind Angle which i purchased from Arc-Zone.
part 1 part 2 part 3 part 38, no like.
where did you buy the spring from
Hi Chris , can you please supply all details and sizes for this item please
Ray .
Raymond Chatfiel Dc knives blog
Did that fool first use a masonry cutting blade for cutting steel at 2:27?
No. Lenox garbage “metal cutting”.
www.google.com/aclk?sa=l&ai=DChcSEwir9KXO1Jb9AhUlFdQBHSWgADcYABANGgJvYQ&sig=AOD64_2z263geM2u-Wu8sqxFQtRWJ0u2ow&ctype=46&q=&ved=2ahUKEwjF4J7O1Jb9AhWhk2oFHaWcBU4QzzkoAHoECAQQCw&adurl=
@@christopherfall9307 sorry!!
And welding!
Ged Reilly the welding is the best part!😉
вот мне про аргон не ясно - на фига ,и вообще долгий непонятный бред !
👏👏👏gracias sininho ativado 🛎🛎🛎🛎🛎🛎
굿
стол хороший
UZI? 🤔
Станков на пол миллиона. А гриндер делает. После фрейзерного хочется плеватся.
Minuto 13:05 que taladro de banco es??
what were the measurements? im thinking of making one
I made this loosely following the DCknives drawings (dcknives.blogspot.com/p/2-x-72-belt-grinder.html?_sm_au_=iQV27tsZj6vZTk5V) Make it! It works really good.
Im the second follower
Thanks for subscribing. I guess i owe you a beer?
Nice project, but it goes to show- ALL the tools in the world/best equipped shop- doesn't make a good fabricator, or more specifically a good "tig welder"! Those are the worst welds, and welding technique, I have seen for a long time. I noticed in a previous post you mentioned you were "used to welding stainless", who are you trying to kid? lmfao...But like I said the project looks good so far.
scotty362100 damn. I guess I should quit my day job and do this full time?
what kind of welder is this?
mallaki it’s a Miller Maxstar 210 tig/stick
very nice. Paw up and subscriptions 😀
Долгий проект. Забыл что в начале ролика смотрел.
Thanks for the walk-through Chris. So many people have asked questions that your videos answer.
I will link your series to my blog. dcknives.blogspot.com/p/2-x-72-belt-grinder.html
Dan
👌👌👌✌👍
خلص الفيديو علينا بس لحام
شنو هو ال ديتابعه ميعرف يلحم 😒😒
METAL DISC PESSÍMO TENHO UM TAMBÉM NÃO CORTA NADA.
I can stick weld that with no helmet and it will be better than your tigs bro
Luis Torres I apologize for offending you master. Please forgive my bad tig welds.
Chris Fall 😂
切割片掉沙好严重。
Esa cortadora de huincha la manejas terriblemente mal , qué eres un espanto ,
Ты попробуи без навароченых аппаратов и инструментов. Как наши ребята. Росияни. Такое делают! Тебе и восне непреснится. А што это было не понял. Адни понты.
???????????????????????sizes????????????????????????
can you give me megerments
Суть видео, похвастаться инструментом!
я блять не пойму, он в самолете летит и это все делает?
Это для кого видео? 25 минут смотришь как он режит и варит метал. Видео херня.
дешёвый понт-дороже денег
,
ma
Yea, not watching.
Бля пол ролика варил .
Пол ролика напиливал !
?
Que video tan aburrido y largo
Isn't it a bit stupid to be using a battery operated grinder right next to power. The whole reason for usage of battery powered tools is when you don't have access to electricity outlets. Just keep in mind battery operated tools are also not as strong and fast as cable powered tools.
Kazy Kamakaze it could be stupid. But I just got it, and I wanted to put it through its paces.
You come here to watch this and comment on his usage of tools? If you have cordless tools and aren't hindered by having to move them, plug them in and so forth why bother? Stop trolling! If you're not providing constructive criticism find another video to watch. He clearly put this up here to give others ideas, of course I bet you've built a lot of DIY projects that people can go watch and I also bet you've done them flawlessly. Just plain dumb to critique someone on why they should use a corded power tool.
Guess that’s why everyone uses corded drills in their shops to....... just saying.
jhmitc bingo! Truth spoken. Some people live and breath to criticize others ideas as internally they get the “superiority rush”. They suffer from low self esteem and it’s a cheap way to try and build it.