Xiaomi Error 15 - Break Lever issue. Fix

So here i will show you how to disassamble the break lever. The error 15 is related to break issue and in most of the cases you could repair it yourself.
First - you have to release the wire from the lever. Unscrew three bolts underneeth. Now the lever can be pulled out. Gently pull it out without loosing
its inner parts.
Now the magnet and the sensor are displaced from each other. I'm turning on the scooter and you can hear the beeping sound with error code 15.
Once i'm aligning sensor with the magnet the error disappears.
Now, when everything is aligned - it is the time to screw everyghing back. Once again - check for the alignment of the magnet and sensor before assembling.
Make sure you align the spring on its original place on the lever and put it inside. It is quite easy procedure.
Immediately after put the bolt inside and tight it up.
The last step is to put the wire back in place. And in order to stretch it squeeze the lever while it is on tension and it will extend the wire from
cable so you can fit the cable back in the pocket.
Thank you guys for watching. Buy.

[@tonywye]

Opened up the brake as per your instructions , put it all back and the error has gone 🎉 if you are ever in Bratislava I will buy you a beer.

[@alexberry7242]

Thanks for a quick stress free solution!

[@vincentcyprus]

Thank you. Great that it helped you

[@mattcoats896]

I did this and it worked. Cleaned the connector even tho it looked perfectly clean. Honestly can’t tell from the vid or from looking at mine what exactly was misaligned. Must just be finicky as taking it apart and putting back together solved the error 15 issue for me. Thanks.

[@vincentcyprus]

Glad it helped

[@naveedkhankhan5990]

I am gonna change my mi 1s pro then i found Amazing Man, your video save my scooter and perfectly solve my scooter issues once again thank 💓💓 Man

[@sirnkosiphilencube]

Thank you so much this really solved my problem

[@daveroche6522]

Very helpful and useful to know. Thank you Sir.

[@vincentcyprus]

Glad it helped

[@Fabian-ps1yk]

You are boss man, u saved my life😅❤

[@vincentcyprus]

Glad to hear it from you

[@MiloMatzy]

Thanks very much. I was just about to order a new battery then see this video. I noted you need to have the magnet the correct way around or the scooter thinks the brake is engaged and applies motor breaking. I also had to super glue the magnet back in place to keep mine functioning correctly. All in all a great free fix.

[@vincentcyprus]

Thanks man. Great it helped you

[@GalenMarek-ir9qk]

Thanks man you help me to solute my problem very quickly😊

[@garethp8796]

Great video…. Thank you 🙏

[@idakamrcoolsas7946]

Thanks a lot it works within 10 to 15 minutes
Thanks from Italy…. Grazie mille fratello

[@vincentcyprus]

Glad it helped. Thank you. 🤝

[@Droktag]

Just fixed the problem following your video, thanks a lot and greetings from France.

[@22thcentury24]

Thanks you saved me ❤

[@fuatarslan1267]

it's done so good bro thank you for teaching that

[@vincentcyprus]

Thank you

[@OlyMar83]

I don’t even have a Xiaomi, I got some generic branded scooter and this worked! I didn’t know what I was doing, some of the parts were slightly different.I just took it apart and put it together again and the error went away 😂
Thanks bro

[@davidmanzat]

I ll try the same hope it works haha😂

[@vay911.]

Best of the best..❤

[@NipponTAB]

Followed the video, Fixed ! Thanks

[@vincentcyprus]

Glad it helped🤝

[@rodooooooo]

Dzięki, dzięki tobie naprawiłem hulajnogę po upadku, odpadł magnes

[@squiggelz5752]

Thank you bro ❤️

[@raxof5528]

Thank you man, my problem is solved

[@vincentcyprus]

Great

[@stephenblakey4913]

Ur the man u just saved me £400

[@vincentcyprus]

Glad to hear that from you. Thank you for your feedback

[@rumbiemutsiwatheofficialrumbie]

Thanks!!!! This worked

[@vincentcyprus]

Glad it helped. Thank you

[@minchopraz]

Thank you!

[@vokalpiyano]

thank you

[@svenppa]

Thanks, good video

[@vincentcyprus]

Thank you

[@P.i.]

Thank you.

[@michelesantomauro7432]

Thanks so much!!

[@vincentcyprus]

Thank you

[@marinotech]

Thank you 😊😊

[@vincentcyprus]

You're welcome 😊

[@RosarioDelBono]

Thanks

[@xmustiii81xx]

Thanks bro

[@vincentcyprus]

Thank you for the feedback

[@user-kd4ml5vq8w]

I really appreciate this post, my grand daughters scooter stopped working after she came off. I tried just taking the sensor out as many posts suggested. I luckily came across yours which clearly explained the way it worked, just as you said the magnet had been displaced. Once replaced, it worked, so thanks again.

[@vincentcyprus]

Glad it helped. Thank you

[@svetievboris]

Thanks man, in my case all it took was to squeeze the hand brake a few times and the error reset it self.

[@vincentcyprus]

Great. Sometimes it is just a connection between wires (where it is plugged in)

[@user-kq5kv2bb1x]

What parts are needed for this procedure

[@antalbos3547]

I have placed a 48v battery and now I have the problem that when I press the brake it accelerates any idea what it could be?

[@mrcr3pzco637]

I have seem to be getting this error when I turn the controller it sounds like the motor spins butturn

[@Trolzzy777]

for me personally that problem was caused because i had a flat tire see if you your tire is a bit flat and just pump her up

[@pitcher-tim-nikoarmy8545]

I replaced the brake but it stills shows error 15 idk what to do now

[@victorperezgarcia597]

Hi, I opened my brake but I’m not sure if I lost a piece as the level is moving toward sides a bit, and the scooter stops suddenly without error or slow the speed down. Could you help me please?

[@vincentcyprus]

Check the spring. It should be located on the bolt

[@shufisaoldacre]

I’ve got this problem but I’ve got wires that come out ! Please help me

[@markcolot9046]

my scoot is error 16 do you have any idea how to fix it? i already check the motor wires and controler but nothings happen still error 16😥

[@vincentcyprus]

Check motherboard (controller) if you have another scooter of similar model you can try replacing it (at least to check if it is controller) and see if the issue is really there.

[@yagizgurbuz]

What should we do if our sensor cable is broken and we don't have a spare part?

[@vincentcyprus]

To buy a new break lever

[@balanguejonathansoriano6211]

hi did you change the magnet of the hand break ?

[@vincentcyprus]

if you found the previous one - just glue it with the right side. If not - then is better to replace the handle with a new one

[@damngurl6053]

This error occured in my xiaomi mi 1s after I hit a curb... I tried what you did in the video but it didnt help what else could be damaged?

[@vincentcyprus]

Try the connection of the wires, where the plug from break connects to the socket going to display board

[@vincentcyprus]

Or change the break lever to a new one. Just order a new break lever

[@damngurl6053]

@@vincentcyprus Thanks Imma try it tomorrow!

[@damngurl6053]

@@vincentcyprus I checked it one of the brakes wires got smashed on the impact thanks for help!

[@sandrasampedro8171]

Lo he conseguido arreglar, pero no entiendo porque ahora el gas no funciona y se frena como la rueda delantera.
La luz roja no deja de parpadear a noser que pulse el freno, lo contrario vamos

[@ZkckMat]

thanks bro you are the best😁

[@vincentcyprus]

Thank you

[@user-ey6wn2gz2b]

thx it worked but it does not accelerate after i fixed it it wont accelerate

[@NoelPinote-dz3bh]

How to fix Error E1 and E2?

[@paveltarget]

Спасибо! Пыль была, я раскрутил и смазал спиртом датчик и ошибка исчезла

[@vincentcyprus]

Супер. )

[@julionumvi3332]

Please I have a problem with my charging system

[@vincentcyprus]

This is the common issue when the battery get old and each next charge it will be harder to charge it.

[@johnchan4522]

Hello, will this process resolve the jolting issue when accelerating?

[@vincentcyprus]

I don't think so. This is related to breaks only.

[@alienmodz1210]

What does the magnet sensor do

[@vincentcyprus]

As far as I know - once it is activated - the cruise control is getting deactivated automatically and the recuperation of energy will start - the front wheel does have a break through giving the power back to the batteries.

[@MiTjalv]

Ёр инглиш пёфект, май инглиш ис чикин

[@vincentcyprus]

Найс ту хеар ю. Хэв э лавли Дэй:)

[@mnagaev]

Почему по русски-то не рассказал?

[@GabsMos85]

Very useful video thank you! I fixed my scooter 🛴

[@vincentcyprus]

Great. Glad it helped

[@InaczejovkYT]

Thank u bro, its i what i need. When i want bin my scooter i find your movie, 5 min and its work again. 🫡

[@vincentcyprus]

Thank you. Great to hear it from you.

[@boenkomat_008]

Thanks bro

[@vincentcyprus]

Thanks