just finished my first season with the saw in the woods. great value for this price point. made around 15 ster and never had any complaints about the machine
The 120 is a good saw if used correctly. I never opened the chain that came with it. Safety chains are good for inexperienced users but a proper chain is a game changer.
Hi from Greece... which one you prefer... 120(236) or 130 mark ll and why? which one has the best ergonomy? power in the wood?.... and what is your opinion about the new 135 mark ll vs the older 135 ???
Είναι σαφές ότι τα ισχυρότερα πριόνια της νέας γενιάς Husqvarna 130 και 135 Mark II δεν είναι μόνο ότι έχουν περισσότερη ισχύ, αλλά κόβουν ακόμη πιο γρήγορα, καθώς και το 120 σήμα II είναι ταχύτερο από το παλιό 236.
habe die Säge für 150 frei Haus bekommen. Kann nicht meckern. Natürlich ziehen die dicken Sägen besser durch... Aber für ab und an mal sägen ist das Ding genial :D
I’m 12 and I’m looking for my first saw to save up for and this one was only $300 Canadian and it seems to be a great saw Edit:*4 months later* I’ve owned this saw for a couple weeks now and put it through its paces and it doesn’t skip a beat, I used it for cutting down a 3 foot round tree and it struggled with that a little but for bucking up fire wood And smaller trees it’s well worth the money
When i was your age i bought a 141 and a couple years ago got a 240 which is the same as the 120mk2. I have to say it is pretty impressive what can be done with these small saws. Save some more money and get some quality safety gear to go with it and you will be set
dont think he knows either. looks pointless to me. some are way to uneven to be measurements. and if they are, why not just actually make the cut while log is off the ground.
@@fella704 That makes so much sense, thank you! I've always used the length of the bar to measure and cut 16" rounds, but measuring 2x the width of the handlebar would achieve the same thing without turning the saw sideways. Gonna give it a shot. Thanks again!
Top Video:) Good saw:) but the Husqvarna 135 is a little bit better, isn't it? I want to buy a Husqvarna 135:) Can you recommend the 135?? Thanks a lot:)
Only had mine 1 year. Just put new carb and air filter and gas lines in it. But in the 1 year I had it. Runs great. And power isn't the best like my 372XP but for under $200 it's definitely worth it.
@@prashanthkunjilana2091 your quite welcome, it may not pertain to your question per say but I just found out myself that Husqvarna owns alot of the other companies that makes saws aswell, a couple of them are poulan, McCullouch was bought out by them, I want to say the weedeater brand is also owned by them as well but don't quote me though, just a little tidbit of info
This guy appears to know what he's doing but I get the feeling he's not respecting that saw because it's a "little" saw. Some of what I saw could be dangerous. Have fun with the saw DON"T let the saw have fun with you!
I dono why so many Knocking his cutting style ?? Hes not doing anything wrong or out of ordinary ? Pretty standard and quick. God people are bitches lol. IF Anyone thinks hes "pinching or binding" the blade hes not. Its just engine is bogging out bit weak, So hes tryn to keep revs up. On the other hand His special fukn chainsaw outfit 😆 u can make fun of that shit. While using his bas as Husqvarna 120 38.2cc beast.
Régi stihl 032 av sokkal erősebb és még gyorsabb is!!!! Persze sokkal nehezebb is de nem szűz picsák vagyunk hanem favágòk ùgyhogy senki ne okoskodjon hogy jujj az nehezebb sùlyra!!!
Finally a video with no cheesy intro animation, no useless talking, just a saw in action.
This is so rare. Thanks for this.
just finished my first season with the saw in the woods. great value for this price point. made around 15 ster and never had any complaints about the machine
Brilliant machine for homeowners and small businesses
Thank you!
Always support the log from underneath so it snaps off when cut is finished otherwise u may get a snagged blade, be careful. Merry Christmas 👍
I have mcculloch CS42S and I think its a identical build. Very good quality 👍
I like the way you mark each log, so you can snap them into smaller pieces.. !
Thank you very nice comment!!!!
Bought one exactly like this one but haven't had a chance to use it yet but looking forward to it
That's a nice little saw!!
Thank you my friend!!!
at first impression it doesn't have much speed, I think it's during the break-in period and after that it will go differently
Хускварна лучшая!!!)))
Thank you!
What’s the difference between the mark1 and 2
Are you still using this chainsaw? If so how is it holding up?
Thank you for making this video. It convinced me to steer way clear of this saw. The lack of overall power will not fit my needs.
Lack of power! How so? Looked pretty dam powerful to me! 😬
The operator was getting the bar pinched with nearly every cut, that’s why it was slowing down.
Isnt that because of the way he was cutting it?
Haha it's a brush saw. Its perfect
The 120 is a good saw if used correctly. I never opened the chain that came with it. Safety chains are good for inexperienced users but a proper chain is a game changer.
chainsaw very good, I have it and it does not present any failure at the moment. Good video friend
👏🏽
Hi from Greece... which one you prefer... 120(236) or 130 mark ll and why? which one has the best ergonomy? power in the wood?.... and what is your opinion about the new 135 mark ll vs the older 135 ???
Είναι σαφές ότι τα ισχυρότερα πριόνια της νέας γενιάς Husqvarna 130 και 135 Mark II δεν είναι μόνο ότι έχουν περισσότερη ισχύ, αλλά κόβουν ακόμη πιο γρήγορα, καθώς και το 120 σήμα II είναι ταχύτερο από το παλιό 236.
Marks 120 c440 bare 18
Model 120 Mark II 1,4kw
habe die Säge für 150 frei Haus bekommen. Kann nicht meckern. Natürlich ziehen die dicken Sägen besser durch... Aber für ab und an mal sägen ist das Ding genial :D
does it use a semi of full chisel on the video ?
Not bad at all this one is gonna be my next saw
Nice ,husqvarna is husqvarna !👍👌💥
who what do you make all those intermediate marks?
I’m 12 and I’m looking for my first saw to save up for and this one was only $300 Canadian and it seems to be a great saw
Edit:*4 months later* I’ve owned this saw for a couple weeks now and put it through its paces and it doesn’t skip a beat, I used it for cutting down a 3 foot round tree and it struggled with that a little but for bucking up fire wood And smaller trees it’s well worth the money
When i was your age i bought a 141 and a couple years ago got a 240 which is the same as the 120mk2. I have to say it is pretty impressive what can be done with these small saws. Save some more money and get some quality safety gear to go with it and you will be set
Molto bravo 👍
Thank you Luca!!!
Are you cleaning the saw chain on the log after each cut?
Yes every day after work!
Nice work
How about showing one of the 445e ll. Please.
YES!!!
What is the purpose of the small cut you make in the middle of each log you cut?
dont think he knows either. looks pointless to me. some are way to uneven to be measurements. and if they are, why not just actually make the cut while log is off the ground.
@@fella704 That makes so much sense, thank you! I've always used the length of the bar to measure and cut 16" rounds, but measuring 2x the width of the handlebar would achieve the same thing without turning the saw sideways. Gonna give it a shot. Thanks again!
dam that little engine that could.
NO. That chain is sharpened!
Cooool very Coool ;-)
Thanks!It's fun for us!
Sounds a bit on the bla side. Bust the baffles out of the muffler and turn the high jet up a bit. Will have a bit more life out of them 38cc
Top Video:)
Good saw:) but the Husqvarna 135 is a little bit better, isn't it? I want to buy a Husqvarna 135:)
Can you recommend the 135??
Thanks a lot:)
Yes Husqvarna 135 Mark II of the next generation RECOMMEND !!! New video today !!!
@@GardenandForest
Okay. But i buy the "old" 135 without Mark 2.
So would you recommend the normal 135 without Mark 2??
Thanks a lot again:)
@@fendtfarmer2d209 The Husqvarna 135 Chainsaw old version is already outdated, the new Mark II seems faster and livelier and is also 0.1kw stronger.
@@fendtfarmer2d209 I would choose a new one !!!
@@GardenandForest
Okay thanks a lot for your answer:)
Nice weekend:)
Nice!!!😆
Thanks Leonard!
Definitely have the chain to tight
Bot
Another bot
Nice 🌳👍
Thank you!
Dobrý. FAJN
Крутой аппарат для профессионалов
Thank you for comment.
What kind of wood dog or felling dog did you get for it?
Pine
@@GardenandForest Thanks
@@quintenparker5910 :-)
Wat size file fo u use
It sounds a little bit weak but Im sure it will last a long time
Only had mine 1 year. Just put new carb and air filter and gas lines in it. But in the 1 year I had it. Runs great. And power isn't the best like my 372XP but for under $200 it's definitely worth it.
Nice
Thanks!!!
Like.
Quando usi questa sembra che usi una penna
Thank you for comment! :-)
💪🔥🔥
Very cool.invite you to play
Thank you!
I always cut under than over to avoid pinching. Love the saw!
Husqvarna made in ?
China
@@Dark.422 thank you
Husqvarna is originally a Swedish company, I don't know though if they're still built in Sweden or not but originally they were a Swedish company
@@davesmith6929 thank you
@@prashanthkunjilana2091 your quite welcome, it may not pertain to your question per say but I just found out myself that Husqvarna owns alot of the other companies that makes saws aswell, a couple of them are poulan, McCullouch was bought out by them, I want to say the weedeater brand is also owned by them as well but don't quote me though, just a little tidbit of info
got mine the other week . its not s good s advertised . bogs down easily at the slightest application of pressure. lacking torque
Made in china genuine
oh, what is this petrol chainsaw, so mussels
That's not how you cut a hanging tree. You were pinching the blade and bar awful. Surprised that little saw kept going with no problem.
same here, why mark then cut every second one, Cut all while up off ground
This guy appears to know what he's doing but I get the feeling he's not respecting that saw because it's a "little" saw. Some of what I saw could be dangerous. Have fun with the saw DON"T let the saw have fun with you!
It's clear he doesn't have much of an idea because he keeps getting the bar pinched for no reason on almost every cut.
Can't get the fucker started, next saw Is gonna be Stihl
L'ho comprata uguale 200€ dai posso dire che va bene 👍
Splendidly to see Woodglut have new plans which helped me save some money and energy for this construction.
🤠🤠🤠👍👍
Made in china?
Made in Sweden assembled in the USA
Just bought one,made in China
bro never used a chain saw
Like!
Перекласти такою мовою: російська
This saw is just a Poulan disguised as a Husqvarna.
Lantul e prea strans
He doesn't have to be, he'll let go.
Lol 1st time with a chainsaw
eso no es trabajo
So what is it?
It's fun for us!
This guy needs to learn how to use a saw
Se caga ,poca power bro...
👏👏👏
Hmm chain seems to be very tight or else the saw is gutless. Bearing in mind it's a cheap disposalable saw I taught it would be better tbh.
Weak machine husqvarna 135 from there it's good
Learn how to cut mate, you are pinching the bar every time. Hope you are not in the industry
Nice saw buut this guy dont know how to cutt!!!
Bardzo słaba ta piła
Imam ja Husqvarna 236 dosta je slaba
Kein Profi.
No power
The weakest saw, I think it's not bad for its performance.
You don't know how to cut wood
I dono why so many Knocking his cutting style ?? Hes not doing anything wrong or out of ordinary ? Pretty standard and quick. God people are bitches lol. IF Anyone thinks hes
"pinching or binding" the blade hes not. Its just engine is bogging out
bit weak, So hes tryn to keep revs up.
On the other hand His special fukn chainsaw outfit 😆 u can make fun of that shit. While using his bas as Husqvarna 120 38.2cc beast.
Sad that you dont know how to cut
Régi stihl 032 av sokkal erősebb és még gyorsabb is!!!! Persze sokkal nehezebb is de nem szűz picsák vagyunk hanem favágòk ùgyhogy senki ne okoskodjon hogy jujj az nehezebb sùlyra!!!