Pole Barn Construction DIY 30’x40’x12'
ฝัง
- เผยแพร่เมื่อ 27 ม.ค. 2020
- This barn was built with the help of family and friends. Took me 3 months from start to finish and cost me right around $15,000 not including electrical and insulation.
Total slab dimension is 30'x63'
I purchased the kit from a company out of Oklahoma named Gober Post Frame Buildings, it was easy to work with them and they helped me along the way if I had any questions or concerns. They sent drawings of the barn layout which were easy to read and go by. I ordered a basic 30 x40 barn and I designed and built the front porch truss to add as accent.
Cost Breakdown
$8,045 30x40x12 Kit from Gober Post Frame Building
$35 sonotubes
$210 wet set brackets, formed plate only
$26 1/2" rebar for wet set brackets
$120 bolts, lag screws
$54 12" auger rental
$240 cement for sonotubes
$37 4- 2x4x16’ lumber for concrete form outside of barn $260 2 loads of dirt
$680 3/8"rebar 12"oc
$160 rebar wire ties , plastic sheeting for moisture barrier
$43 plumbing for future toilet
$60 Rubber boots purchase for helpers during concrete pour
$3442 27 yards of concrete
$650 labor payout for crew who helped me finish concrete
$10 masonry screws
$63 4x6 posts mounting brackets and concrete anchors
$376 lumber for front porch roof truss
$40 stain
$37 door parts , door knobs
$40 paint
$40 fork lift rental to raise front porch truss
$30 primer for door
Total $14,698 (not including electrical and insulation) - แนวปฏิบัติและการใช้ชีวิต
Awesome job! I love that overhang in the front. You can leave the door open if it's raining and if you are in a snow zone it won't get all packed up against the door!
Hey , looks a great job , proud of you for getting it done and a big thank,s to the friends and family that helped , i move down to Newfoundland about 10 years ago from Ontario Canada and did promise my self a 30x30 garage , well i finally built it / had it built this year , it did set me back $ 28000-30000 as i had to get a carpenter to do the job for me as i am no good at this sort of thing, so my specks are , 30x30 inside with 12 ft ceilings , and 200A supply electrics with separate meter , 2 x10ft x 8ft high garage doors and a 7ft x 3 ft side entrance door i had 3 windows fitter 2 at 10ft high for light and a 3x4 ft standard fit by my future bench area the roof is metal and the siding is plastic looks good but the main thing it was worth it to me , the floor is 6: thick and the concrete is 3500 psi , it all sits on a floating Alaskan slab ( their is 10 full truck loads of stone in the foundation ) Thank you and good luck to finishing it the way you want to Anthony
B. Bbbbbbbnnmol bb. Nm.
Coolest pole barn video ever.... inspiring . Awesome craftsmanship and creativity as well. Love the music in the background and production quality of the video. Well done front to back!
This was done incredibly well!! Thanks for the great tutorial.
You providing prices is everything 🤗
Great build...!
Thanks for sharing this information with us.
Stay safe and healthy.
Have a great day and be blessed.
Turned out great! I like the covered outdoor area.
Looks awesome! We’re in the first stages of starting ours and we cannot wait till it’s completed. They’ll be coming out this week to get started.
Terrific sequence of posts and levelling. Be well🇨🇦
Excellent job. Well thought out and good craftsmanship!
Wow that’s beautiful!! Made it look easy
Very nice! Thank you for creating and posting this video! My best wishes and regards to you and your family!
Thank you !
Nice to see the kids involved, My dad would have me help him on his projects. I learned so much from him so nice
That is a very nice barn/workshop. Well done and thanks for the video. It was awesome seeing how you built it.
Like the piers and brackets. Looking at a metal barn build with same setup but without a slab. Thanks for sharing.
Great job! Every time I watch one of these I kick myself. I built a 30x40 shop about 11 years ago and I see all the things I would have done differently. Mine is nice and it serves the purpose. I built 4 homes and say the same thing! "I wish I would have done this or that!" lol
I was not happy when the video ended 😂 fantastic build . Nice work 🤙🏼
Nice job man. I love the brackets you made to set the posts on. Much better than sinking posts in the ground. Great looking building.
Great tips guys - thank you.
How do you dislike this video ?! Great job man. It’s a dope build.
Excellent work!
Nice looking pole barn!
Very Nice and done right 👍.
I wish i had the property.
I’m so grateful God has lead me to your video. I will be building much the same and looking at every cost saving Technique As money is tight but I’m not gonna let that stop me. I will be referencing your video many times in my future. Mine will eventually be a horse barn that my wife and I have dreamt of building for our daughter. Ella is a cancer survivor and has taken the horses for therapy “Ella fights back”. I would love it if you were available to answer a few questions but it’s ok if not.
Thank you for this inspirational video 😊
Awesome job!!
Nice barn. Great job.
Cool build love the channel!!!!!
Thank you for the cost breakdown. I plan on making one of these.
Nice layout and execution.
Im going to steal that timber framed porch extension from you. Seriously tho great build and video. Enjoy that building.
that is gorgeous!!!!!
beautiful made.Hats off to you sir.Selvam India
Great idea to create your own post holders. I bet that saved a pretty penny.
I'm buying a home soon and have been wanting a pole barn for a long time, but it might push my options out of the water so I might end up building one! Thank you!
I love it , I use mine as a work shop and storage ,good luck !
Looks great
I would expect nothing less from "BABY JESUS"!
Wow that came out nice. :-)
Good job
Nice video. I saw this project get done live via Snap Chat.
Snaps will keep coming
Nice Shop. Now you have so much extra room do do activities.
Nice. Only thing I’d do that you didn’t is line the underside that overhang roof with steel so birds don’t set up shop up in the corners and crap all over things.
Wish i could rent a forklift for $40.. great video.. showed a lot of detail
Awesome vedio! Great job all the way around! I've been looking into building a pole barn, but it was cheaper and faster to start with a 40' HC container on my cabin property. My barn build will have to wait... Thanks for sharing your build!
I nearly did a container also , a lot you can do with them
Very nice work indeed! What the purpose of the in-and-out technique on the screws? Does it help with sealing some how?
Yes for sealing, regular drill doesn’t always push the sheet metal all the way against the 2x4. Impact driver works better but you need to watch out for overnighting
Nice level
Can you come build mine now? Lower Michigan 😁💯
Nice, but man buy a tripod! Got a headache trying to watch
Nice job
I was wondering if you could make it in to a house and live in it. Or dose it have to be built different ?
+ plumbing and electrical
Nice build !!! What did the kit cost you if you dnt mind me asking?
Nice
Hey dude, I just wanted to say I had a little heart attack when I didn't see you wipe that dirty truss down!
It was one muddy day , don’t worry I did wipe it a little off camera 😆
No bearing blocking for the plates, no knee bracing for wind or lateral.bracing on trusses?
When siding, why did you driver, reverse and drive the screws each time? Great video!
Your painted sectional overhead door looks great..how did you prep the factory baked on enamel white finish to start?
I did a really light sanding of the white finish, blew air to remove dust , then i used a cloth soaked in mineral spirits to clean it up well before applying some rustoleum clean metal primer thinned with mineral spirits and then just applied the black oil based paint also thinned with mineral spirits. I really like the way it turned out , the coat came out strong should last a long time
Nice crocs
Life wouldn’t be the same without crocs
I want one badly
Was there a difference in depth of the concrete towards middle of barn or kept the same depth throughout foundation? Very nice build!
It was kept at about 4-5”
What was the overall cost?
What did you guys use on the front of the tractor loader to hoist the trusses up? Was that a home brew pipe or what? And if y’all made it can you give me some specs on it please?
It was a 20’ long 2-7/8” schedule 40 structural pipe. We also used a chain to help the sag when lifting the truss
Baby Jesus thank you! I wasn’t sure what the going technique was not renting a telehandler so this ought to save me some $$.
Great Video, who was in charge of the Audio/soundtrack?
Muah lol
I used the free iMovie app on iPhone , it was easy
Awesome video!! Who fabricated your trusses? We are about to something similar down here in Huntsville TX.
The company I bought the kit from fabricated them . They are near Oklahoma City
Gober Post Frame Buildings is the name of the company
@@babyjesus557 , Thanks for that Im just south of OKC . Did they supply the anchors that you used for your up right posts ? That is the way to go. I've been watching RR Buildings videos and that is how they build all theirs. Great job on your build !
No , they did not supply . I had a local fab shop cut and form my brackets . We just did the welding
What kind of paint did you use?
Do you have a rough estimate of what this cost to build?
On the brackets, did the rebar just get welded on one side? Or did they get put through the bracket and welded on both sides? Hope that made sense.
I just did it on one side. But it sure does sound it would be a lot stronger if you did on both sides. Wouldn’t take much more to get it done that way
After you pour your slab part of your bracket will be under concrete which strengthens it up there also
Baby Jesus I’m planning to do the same thing and was looking at the brackets RR buildings uses in his builds. Never thought of the diy route! Thanks
For the inspiration
bpdp379 yes , i saw them there to , they are expensive. I had a small local fab shop build my brackets then I just bought the rebar , cut it and welded on ourselves
@@babyjesus557 if I were to ask a fab shop to do mine what should I ask specifically to ensure I get a strong bracket
Turned out really nice, the color combination looks great where in TX are ya'll?
thank you, we are in Paris Tx
@@babyjesus557 I am a ways south of you in Tyler County, take care.
Cool shop... but get a photographer next time lol.
How many days to build 30x40?
What state are you in? i live in texas and have been thinking about doing a pole barn build.
Texas . You won’t regret it
Why do you screw the screw in, back it out then screw it back in? I've never seen that done before. I'd love to know a new technique or trick of the trade. Thanks
Didn’t have to do it every time , but sometimes the sheet metal doesn’t tighten up against the girts , pull back and and going back in takes care of it
Steel in the piers ?
No vapor barrier under roof sheets??
Planning on spray foaming the ceiling , didn’t think that was necessary
Nice job sir
Please any labour job their I am from India and I have 7 years experience in this fild
I’m no pro, but I’d put the trusses on the posts, not nailed to side
How much was electricity and insulation?
Have not done that yet , but doing electric myself should run around 1k , I’ve got quotes on spray insulation around 4k
I just priced this same building from 84 lumber today, and they want $20k for the kit... smh
Is there an estimated amount of beers consumed during project?
There was roughly 216 Ultras For The Sed consumed during this build , cost me around $240 , sorry I forgot to add this to the cost breakdown list in my description
Liked the build , but at 840 of video you I'm assuming you wearing boxers and crocks Really. Seriously nice build.
What’s the spacing for the post? And did you line up trusses to every post ?
Spacing on the posts was 10’oc except from the outside corners to the center of the next post it was 9’ 10-1/2”. On the front wall where my 10’x10’ overhead door went it had to be an opening of 10’ 5”oc. There was a truss at every post and also one between the posts , total 9 trusses. I used 5x5 posts
How tall did you get the post and how far are they in the ground. Also how many vehicles can you fit in it I plan on build either a 30x40 or 30x48
And what spacing did you use for your boards going up the walls ?
Los barrotes de las trosas son 2/6 o 2/8
What kit did you use?
2x4 purlin and girts. 5x5 posts . 4/12 roof pitch .
would be easy to convert to a barndominium
Yes it would
Just found your channel. I have equipment/ construction videos if you’re interested. I subbed!
What is the cost breakdown. Was it a kit.
Cost breakdown is in the description
I would say post a DIY on your fence but that would be a long ass video 😂😂
Jajaja
Why didn’t you burry the poles in the ground?
They should last longer above ground in my opinion . Shouldn’t rot as easy
@@babyjesus557 good choice! Much superior to be above grade, (properly as you did) than to have the posts burried. 99% less likely to fail due to rot and termites than a burried post.
Nice little build by the way man. 💯
looks nice👍
What was the cost to build
Cost breakdown is in the description
did you have cost of permits? That is really cheap concrete work. Nice Job I want one.
I did not need a permit where I live
I’ve enjoyed it a bunch , it’s where I spend most of my days at now
Bad Video: You made us all dizzy as Fuk. At least you didn't have some cheesy music that played through the entire video. Baby Jesus, you can't use head cam's and play them at high speed.
Nice building, but incorrect method of securing your post brackets. Need L bend on rebar in concrete.
OOPS.............You screwed up.........you are supposed to use tripled up 2x6s for posts not solid 6x6s that can twist. You lose.
DIY? LOL
You lost me at Ryobi lol
I don't know what is so "Great". You're not talking anybody through anything. No explanations. No nothing.
That was a wasted
15 minutes outta People's lives.☹️
Based on the ratio of thumbs up to thumbs down i'd say you're in the minority. Quite enjoyed it myself. Tip for next time you've clicked a video you don't enjoy...there's a little 'X" in the top right you can click to make it disappear.
Agreed that was an awesome video. Some people have goals in life, some people just don't know what life is.
Just about enough time for your Mom to get up and make
you some Hot Pockets...!
hahaha
You sir are a dumb ass!!
Good job