Ryobi 40V battery fail, Master Reset!!!
ฝัง
- เผยแพร่เมื่อ 8 มิ.ย. 2022
- My low use Ryobi 40v battery showed an error and would not charge. I searched all over the web looking for a fix. I came across several youTube videos that were similar to my case. I tried them but no success. Finally I tried one last time with a simple variation and it worked. 40v battery is now working like new. My battery may have been a newer or later model then the others with a slight change in the reset procedure.
Please note: I am an Amazon affiliate and this channel will receive a small commission from the link below. Price for you remains the same.
Torx security bit set
amzn.to/3N0CvFT - วิทยาศาสตร์และเทคโนโลยี
IT WORKED!
Just one tip for those watching, buy the Security Torx bits. If you buy the regular torx, you'll be highly disappointed as it won't fit.
Thank you so much for posting this video, saved us so much money!
Thank you so much for sharing your success. Have a wonderful week.
they do fit, albeit loosely
Great video; this worked! Two notes: 1. Might mention that "dummy plug" just covers the fourth screw. 2. On older Ryobi 40V batteries, look for 3V GND and RST. They are in a different place on older motherboards. I noticed you jumped "RST" and the lone contact next to it. My "RST" was down in the corner among many others. Right next to "RST" was "3VGND" or something like that. Jumping RST to that did the reset. BTW, On one battery I didn't need to push the button to reset it; it went on its own as soon as the jumper connected. Overall, you saved me some money on multiple batteries. All work now. Thanks!
You are very welcome. Thank you for the detailed report. I am sure many will be helped 😊 by the details you have shared. Have a wonderful weekend.
I seem to have this battery! I’m scared to reset bc there are five different hole options not sure which one is the reset one 😣
Great video I did exactly what you said to do and it fixed my battery. Thank you so much for that last "push the button at the same time" instruction!!!
Thanks, that sounds like the board I got.
Question for the group. I followed all the steps, and got all the results EXCEPT when I put it in the charger all the lights light up for a few seconds then nothing. When I press the charge button the all light flashing is back. Ideas?
It worked great! Those pointers about the indicator lights helped out. Your video was so helpful I didn't even need to keep watching it over again to make sure I didn't miss a step. The battery is now working and charging. Thanks.
You are very welcome. Thank you for taking the time to share your success. Have a wonderful week ahead 😊.
After watching and trying all the other nonsense this worked like a charm. I can’t believe all the time I wasted with the other “fix” methods. Thank you for a great video.
You are very welcome. I am thankful that this video was helpful. It's so great to get a battery back in service . Thank you for sharing your success. I, too, tried all the fixes but couldn't throw it away 😀. After finally finding a fix, I knew I should share it. Have a great week.
Just did this - seems to have worked! The battery is charging normally. Now if the mower only starts when I put it in, I’m back in business. Otherwise I’ll be searching for videos about testing and fixing that next. Thanks the the clear, thorough, and accurate advice.
You are very welcome. So rewarding to get a successful report. Thank you for sharing your outcome with us. Thank you for watching, have a great weekend 😀.
Thank you! Worked for me just with the paper clip jump and didn't need to hold the button. I needed to use my Ryobi lawn mower this weekend and have already ordered another battery, but it didn't arrive as it was supposed to two days ago. I'm glad I found your video. 👍👍
You are very welcome. To happy to hear you salvaged you battery when it was needed most. Have a wonderful week ahead 😊.
It works BUT..... Those who have batteries cast aside years ago because of "defective" signal may find it takes a bit more work to bring these back... Mine was two years old when it died and had sat for another two years before I found about this hack to fix it. All went as described EXCEPT when I touched the reset and hole next to it, no lights. Nada. I had to push the button while the jump was in place to get the row of lights to come on and stay on (instead of blink) . But that was only the first step. When I placed the battery on the charger, it only charged for a few seconds before flashing "defective" again. I repeated this many times. Reset, charge, fail.... reset charge fail. But each time the normal charge light blinked green a little longer. Finally about the 10th reset, the lights on the battery came on by themselves when I did the jump. First time that had happened. And when it went back on the charger, it finally behaved normally. No defective green/red combo. So apparently had to get enough juice back into it for the reset the actually work. So be persistant. I have no idea how long this battery will last given these issues. But just be aware this may be an issue on older batteries in a low charge state.
Excellent information 👌 👏. You have helped many, I am sure. Amazingly after all those years sitting you have revived it. It's great news to not let a powerful lithium battery go to waste. Thank you so much for sharing your experience with us.
Thanks for this. I just tried the other two methods and the same thing happened that you described. Now I need to go back to the garage and try the same process over and over to see if I can recover my battery. Will update
@@mikewelpott8743 Sadly this proved a temporary fix for me. It worked but the battery would only partially charge (one light). And would only run my mower for a few minutes. It died altogether after a few uses. But it had been dead for a LONG time before this resurrection attempt. So perhaps you will have better results.
My update. No go. I tried at least 30 to 40 times. At least 5 times the lights would illuminate when I jumped the pads, so my hopes were increased, but no luck. Bummer, as I think that this battery has to be only a year old...it came with my blower with SN 026. Now, buy Ryobi again or chinese knockoff from Amazon???
@@mikewelpott8743 what a wast of ur money. I was about to buy the nee Ryobi power station and it uses these sane type of batteries. What is your advice should i buy a diffetent brand of powe station.and why does this happen to thees batteries?????
Genius! Super simple. Took less than a minute to get this done. Thank you!
You are very welcome. Thank you for sharing your success. Have a wonderful week ahead 😊.
Thank you so much I bought 2 at the swapmeet for $5 each. now they are working!
Wow! Excellent. Great find, glad 😊 they are working. Have a wonderful day. Thank you for sharing your experience.
5:44 The jumper reset my battery. Low use. Just used one day and would not charge. Can’t believe that reset isn’t built into the button. Hold for 5 seconds or something. Thank you so much for this straight forward video!
You are very welcome. I feel the same way about having a reset. Thank you for sharing your success. Have a great weekend.
I've tried several ways that some TH-camrs introduced. However, only your method works perfectly. As a result, I salvaged my Ryobi 40V--4Ah battery. Thank you so much for your valuable contributions!
I am very thankful for your report of success. It is such a wast to throw away a perfectly good battery that is not working. Todays electronics have many fail safes and are designed to lock out the consumer. I am sure some batteries will not revert back to working properly. However some are just a software glitch that needs to be reset, like many things in today's world of tech. I too watched many TH-camrs videos with out success . I was ready to give up on this battery and tried one last thing.....
Thank you for sharing your success . Have a great weekend. Thank you for watching.
@@htnowpro Thank you again for prompt reply! You are totally right! I can tell that you are truly gentle and intelligent man! Wish you a wonderful holiday and long weekend!
Thank you 😊.
On my 4AH 40 Volt, this worked by holding the jumper for about 4 seconds, then one of the lights flashed. I checked before and after voltage and both were 34 volts. I then set it in the charger for a few hours and now my blower works again! Thank you for taking the time to video this for us.
You are very welcome. Thank you for sharing your success. Have a great weekend.
Fantastic. Everyone in the family was amazed that I fixed it. 😀I didn't need to hold the button. It flashed one upon reset. But this will happen again. That's the best part of your video and the bonus tip. I have a lineup similar to yours with 6 batteries. BTW, I had 2 dummy plugs. After trying to pry them from the edge I realized the best method was to use a small head Phillips and maul them through the middle while twisting. Within 30 seconds that enabled enough leverage to yank them out.
That's wonderful. So happy 😊 another battery will live to do additional work and not end up scrapped. Thank you so much for sharing your success!! Have a wonderful weekend.
This worked for me. 1 million thanks for saving me 60 bucks 😊
@@lstefanakys1$60??? You can't buy a 1.5Ah 18v for 60dollars
@@pasqualeredo actually it went bad again and ended up buying a third party brand. 😞
Hey man , thank you for sharing your time and effort and mostly your knowledge.
Very well appreciated.
You are very welcome, have a wonderful weekend.
I have been looking for a video like this for quite some time. Thank You! Last summer I replaced my entire tool catalog to Milwaukee because of this battery system. But I hung onto the Ryobi's because I knew someday (or someone) would figure out how to restore these batteries.
I am like you. It just wasn't right to discard a battery that should be good. I am very happy it worked out well. Have a wonderful week.
You are the kid! Saved me $169 from buying a new battery.....worked like a charm!
So glad to hear the news. Thank you for sharing your success. Have a great week ahead.
This worked. On mine I didn’t have to press the button, just made contact with the RST inside. Fashioned a paperclip to look like yours, worked perfectly. Thank you!
You are very welcome. So glad you were able to extend the life of your battery. Thank you for posting your results. Have a wonderful week ahead.
Thank you for this video! I had a 40v battery for my leaf blower that showed a fault. I took it apart and cleaned off some mild surface corrosion and tested the voltages for every series and they were good, but still wouldn't charge. I inspected every component and nothing looked out of place or obviously burned. I completely overlooked the pads for the reset! As soon as I shorted those pins together the 25% led on the battery flashed and it's now charging. Thank you, again!
You are very welcome. I am so happy you were able to save your battery. I basically did the same thing, then I searched youtube and then jumped the reset, but it didn't work on mine. I put it back together but didn't throw it away , I knew it shouldn't be bad so soon. Later I tried one last time. That is when I pressed the button at the same time...it flashed and came to life!!! Thank you for sharing your success. Have a wonderful new year ahead! Thank you for watching.
I followed your directions and it worked perfectly the first time. Thank you!
Wonderful, thank you for sharing your success. Have a great week ahead 😀.
I watched your video and read the comments and tried it. Nothing worked. But then I used my tweezers (pointy tips vs flat) and stuck them in the holes at the same time and pushed down a little. That made the lights turn on and then the single light flash. If it wasn’t for your video I would never have tried it. Thank you!
Thank you so much for sharing your experience 😊. I am very happy it worked out well for you. Just shows, there's always something new to learn. Have a wonderful week.
🎉 You rock! I had set it aside with the intention of having to throw it away. My wife mowed and kept restarting the mower until the battery was completely drained. Gave me that error lights on the charger and tried taking it off and on 100 times. So simple and it worked!
What a wonderful report! Thank you so much for sharing your success 🙌. Thankful it worked out for you. Have a wonderful weekend.
Thanks for this video. I was disappointed that simply jumping the reset terminal didn't work so I Googled again and found your video. My super expensive battery might have more life in it yet!
You are very welcome. Have a wonderful week ahead 😊.
THIS SO WORKED.... THANK YOU! I had a brand new 4.0AH battery my family left outside in the rain and it wouldn't work anymore. I took it apart, cleaned it up, jumped the jumpers and pressed the button and BAM, works like a charm. Saved me $190 from going to get new battery this weekend.
Congratulations and thank you for sharing your success. Wonderful report. Have a great weekend!
Thanks for the simple explanation, pressing the button made all the difference.
You are very welcome. Thank you for watching and sharing your results. Have a wonderful weekend 😀.
Your method worked perfectly! I tried the jumper method before but didn't push the button at the same time and that was the difference maker. You jump it and push the button and it works. Thank you much, saved me at least $100 for a new 5ah 40v.
You are very welcome. I am so pleased 😀 it worked out for you. Thank you for sharing your good outcome with everyone. Have a wonderful week ahead.
Worked great. Didn’t have to push the buttons during the “reset”. It’s now charging! Thank you!
Cool. Thank you for sharing your success. Have a great weekend.
It worked! You are the first to mention to press the button while the resets are jumped and my battery is currently charging. Thank you!
You are very welcome. Makes my day knowing the video helped you. Thank you so much for sharing your results ❤️. Have a great week.
Another grateful Ryobi battery owner. Your procedure worked first time - thank you!
Thanks for making a clear to see video.
Just used this information to fix my Ryobi battery. Saved me $50. Thanks for your video!
You are very welcome. Thank you so very much for sharing your success. Have a wonderful week ahead 😊.
Thank you, it worked! I think it s interesting that nothing is mentioned in the battery insert about resetting. Shame on you Ryobi!
You are very welcome. Thank you for sharing your success 🙌. It's great to be able to reset your battery and not have to throw it away 😀. Have a great day.
Dude, love you lots man. Worked like a charm. Used a drill bit at super low speed to drill out the dummy plug covering the 4th screw. Thank you so much.
You are very welcome. Thank you for sharing your success. Have a great weekend 😀
Never had so many problems with my Milwaukee like i have with Ryobi 40v.
Thanks for the video. It worked on one of them.
You are very welcome. Have a wonderful Thanksgiving 😊.
God bless America and Wilwaukee company. LOVE MILWAUKEE!!! Ryobi sucks period.
This actually worked for me. Charged right up to 40.2 volts and I'm back in business. Was facing $180 to replace it as it was 4 months out of warranty. Thank you kind sir.
You are very welcome. I'm so happy it worked out for you. I didn't find this out till after I bought a new battery 🙃. Thank you for sharing your success.
Excellent video. Thank you. I followed your instructions and I was able to get my Battery/Charger working again. The battery is charging as I type. The “dummy screw” was just a plastic cap. I used a drill to put a hole in it just enough to get a screw diver in to pry it out. Then I used my drill and T10 bit to remove the screw that was underneath. I used a paperclip to jump the pins. The Green lights came On and I was able to charge the battery. I also did not have to press the Power test button at the same time. Thank you again for your video.
Another battery put back into service, Yay!!! You are very welcome. Thank you for sharing your success with us. Have a wonderful New Year ahead!!!
Your video saved me a battery purchase. Thanks for taking the time to post.
You are very welcome. So glad to help. Thank you for sharing your success. Have a wonderful week.
I was about to go buy another battery or just switch out to a gas powered one completely when I decided to TH-cam if there was any troubleshooting for the battery luckily I stumbled upon you’re video and all I wanna say is Thanks for saving the day and teaching me something new !
You are very welcome. I am so happy to help out 😊. Thank you so much for taking the time to comment. It means a great deal to me.
Thank you for this video. It’s short, sweet, to the point and it helped me get my battery to charge again.
Wonderful to hear the great success. So thankful you 💓 shared it with everyone. Have a good week.
Just did this. I had to press the power button while jumping the RST. Battery now appears to be working and is charging. Woohoo! Thank you for posting this video!
Glad it helped. Thank you for taking the time to share your experience 😊. Have a wonderful week.
You think they would put a reset button on the outside but I guess that doesn’t help sell as many batteries . This 100% worked , wow! You are the best. Thanks for taking the time to put this video together for us . My fiancée now thinks I’m handy. I guess I’ll let her think that until the next project 😂
😀..lol. Thats a good one, I think you are handy also. You did the research and were able to reach the desired results 👏. Job well done. Thank you for sharing your success.
Thanks - again! I just reset the same battery for the second time about a year later. The hardest part was finding the star tool to open the case again. ☺
You are very welcome. I am thankful it worked for you a second time. Yes, sometimes looking for that seldom used special tool is time-consuming. Happens to me .
Another success. Thank you so much. Just had to do a little "digging" to get the cover off the 4th screw.
Awesome 👌 👏 👍. Thank you for sharing your good experience with the rest of us. I'm so pleased it worked out for you. Have a wonderful weekend coming up. Thanks you for watching.
This worked for me and I did have to press the button! Thanks for the tip and the link to the drill bits, they worked perfectly. For anyone trying to get up the plastic plugs, I used a pocket knife to gently work a hole into them and pry them up.
Thank you for sharing your success and the tip on removing the tamper plug. Have a wonderful weekend.
Great vid, thanks. I noticed the PN, Rev, and sequence number on the main board. Hard to see clearly but yours looked like 007, on mine, it was 026. My battery reset without pushing the button. I held the jumper for a five count and the lights flashed. For those who are trying to figure this out, It may be helpful to note the board version as you determine how to reset, jumper only vs. jumper and switch...
Great information 👍. Thank you for sharing this with everyone. Surely it will help many. Have a wonderful weekend.
Thank You for posting! You saved me $150 on a new battery! Of course Home Depot doesn't want anyone to have this knowledge.
You are very welcome. Thank you for taking the time to share your success. Have a wonderful remainder of the week.
Thank you for taking the time to make this video.
You are very welcome.
Thanks a lot Sir. Your technique worked with my 40V 5AH Ryobi battery which was out of warranty. The only difference with my battery was, when I connected the reset terminals, all the 4 lights momentarily flashed once. I did not have to press the battery indicator button at that time. Now the battery is charging perfectly as before. Prior to the reset, whenever I pressed the battery indicator all the lights were flashing but it was not charging. The charger was flashing green and red lights which indicated defective battery. After the reset procedure, the problem of not charging is fixed.
I'm so glad you were able to reset your battery and get it back in service. Thank you so much for sharing your success! Have a wonderful week ahead.
Mate your a champion thanks for the vid just sorted a battery my wife said wasn’t working sir you probably saved my marriage
Have a wonderful week 😊. Thank you so much for your great report. 👍
Thank you so much for this video! Saved me a lot of money for a new 40v battery. It took me half a day to figure out how to remove the "dummy plug" (that's me! ha, ha!) but after that it took a few seconds to reset the battery. I used a pair of fine pointed tweezers to bridge the two little reset buttons and it worked great. The battery is on its way to a full charge. Thanks again.
So happy 😊 you saved your battery. Thank you for sharing your success 🙌.
Thanks man, your comment saved me money. When i seen you used tweezers, i got up right away and got mines and my battery is working!. thanks again and thank you hightech for making the video
How do you remove the dummy plug?
@@willgonzalez9045Turned out there wasn't one - just 4 star screws. No special tool required.
Thanks, it worked. I used a staple I bent to reset. The light did flash when I did the reset. It might have been good to go at that point but I went ahead and pressed the side button too where the 4 lights lit.
I put it back together and my charger worked and fully charged my battery again.
Thanks again.
Awesome! Thank you for sharing your experience 😊. Have a great weekend.
Thanks for this tip! That last part about the button was key for me!
You are very welcome. Glad to be able to help out. One more battery with life left in it. Thank you for watching and commenting ❤️. Have a wonderful week ahead 😊.
Thanks for a very helpful video. I had the same problem, nothing on the internet worked until yours. It took me only 2 minutes and it did exactly like you said. On charger now and $6.00 is better than $149.00 to replace. Thanks again
Congratulations on your success. So glad it worked for you. Thank you so much for sharing your achievement. Have a wonderful week.
Great video. Had a battery in sleep mode. Tried the in and out of charger and didn’t work. Bought a new one, but before I opened box I tried your method of resetting. It’s currently back on. Charger charging correctly. Saved me $300
Thank you for sharing your success. So glad it worked out for you. Have a wonderful weekend 😀.
This worked perfectly. I was so pumped to get my 40v 5ah battery working again.
I am thankful also. Thank you for sharing your success. Have a wonderful week ahead. 😀
I’m glad I found this video. I was about to buy a new battery. And Ryobi batteries are not cheap!
I just came across your response. I am so glad you were able to save your battery. Thank you for sharing your success. Have a wonderful weekend coming up.
Pure genius. In my case I had to use a Dremel tool to cut through 2 screws to open the battery but the battery is now back in service!
Wonderful news. Thank you for sharing your success. Have a wonderful end to the week.
I have several old Ryobi 40v packs that "dead". I've been saving them to harvest the good cells, but never have. I'm going to give this a shot. Thanks!
You are very welcome. Thank you for taking the time to share.
Video is the best. Worked flawlessly. Thanks!
You are very welcome. Thank you for sharing your success. Have a wonderful week 😀.
Thank you for taking the time to make this video. This works for me.
You are so very welcome. Have a wonderful week ahead.
Thank you! Wish I would have seen your video before I went and bought a new battery.
You are very welcome. I wish I had known also. I just had to try one last thing before I discarded an almost new battery. Thank you for coming back and sharing your success. Have a great weekend.
Holy **** it worked!!! Didnt need to push the battery button, just held down the RST buttons for 5 seconds with a safety pin. Thank you for saving me $150
You are very welcome. So happy it worked out for you. Thank you for sharing your success.
Followed the instructions to the letter. Worked Great!! Thank you.
You are very welcome. Thank you so much for sharing your success. Have a wonderful week 😊.
Thank you! I can't believe this actually worked! Thanks again for taking the time to do this video!
You are very welcome. Thank you for sharing your success. Have a wonderful weekend.
Thank you sir! This was super easy to do and just saved me from purchasing a new battery.
You are very good. Thank you for sharing your success!!!
Thank you very much.. I followed every step as you described and my battery and I are now very happy. Nice job. God bless you.
You are very welcome 🙏. Thank you for sharing your success.
Mr. Thank you very much for showing me that I tried everything that you did watching other videos thank you I'm going to try it your way
You are very welcome, hope it works out for you 😊
Worked perfectly for me! Thanks for the easy to follow video.
You are very welcome. So glad to hear your success. Thank you for sharing. Have a wonderful weekend.
This did the trick. Had tried the “in and out of charger repeatedly” and “jump from a good battery” before with no success. This was easy enough and as a bonus, actually worked. Appreciate the cautionary comments you make in the video but it didn’t take any advanced electrical skills to do this. Thanks for this video.
You are very welcome. I'm so thankful it worked out well for you. Thank you for sharing your success. Yes, cautions are a normal part of life. My interpretation when I hear or read the cautions usually goes something like this: Are you sure you want to try this? Are you really sure you want to try this, and are you really ready and willing to accept all responsibility for trying this? Thanks for watching.
Thanks for making this video. I found 2 batteries on ebay with the same model number as yours being sold "as-is". Wish me luck!
I hope it works out for you. Please let us know the results. Have a wonderful week ahead 😊.
Awesome, you just saved me from having to buy a new one, worked for mine , thanks for posting 👍
You are very welcome. Thank you for sharing your success. Have a wonderful week ahead 😊.
This worked for me. Mine has two dummy plugs that were tough to remove to get to screw. Thank you for saving me a lot of money
You are very welcome. Thank you for sharing your success!! It's great to have a working battery for zero dollars. Have a wonderful New Year ahead!!!
This worked for me. The lights never flashed during the reset jumper, even when using the status button. When I completed the reset and retried it the battery came out of the frozen state. Now fully charging and works well - Thank You
You are very welcome. Thank you for sharing your success with everyone. Have a wonderful week ahead 😊.
Big thank you for the video. If I would have done what you told me not to do, then it would have worked perfectly & it would have taken less than a couple of minutes. Great job.
BIG 😀 SMILE! Thank you so much, made my day. Have a wonderful week ahead.
Thanks, you rock! Was able to at least fix one of my two "bad" 40v batteries. This fixed the one with flashing lights, it however did not work for the one with no lights/no signal.
Thankfully, one of them was returned to service. Thank you for sharing your success. Have a great week.
Amen! Thank you for mentioning the button. I dropped my blower and thought the battery was junk.
You are welcome. Glad it worked out for you. Have a great week ahead. 😀 Thank you for sharing your good experience.
I came across your video while actually searching for how to “discharge” my 40V RYOBI that had also become unusable, blinking Yellow/Green on charger. I was thinking I might overcome the issue by fully discharging the battery pack. However, after watching your video, I decided to try your second method for resetting the battery (jump & press battery button). Luckily, all I needed to do was the first method (jumping the circuit) to reset the battery. Nevertheless, I appreciate your video for revealing both fixes. It’s nice to have a backup method if In encounter the issue again. The battery was down to one bar but it charged up without error and now works as good as before. Thanks!
You are very welcome. Thank you so much for taking the time to share your success. It's great to have a working battery after having it lock up and refuse to charge. Have a wonderful week 😊.
Worked for me great, I didn't have to push the button but I did anyway after jumping connection. Thanks a bunch. Previously I tried the battery to battery method which didn't work.
So glad you were able to restore your battery and make it operational. 🙌. Thank you so much for sharing your good experience. Have a great week ahead. 😀
Reset method worked perfectly! Thanks!
Wonderful! Thank you for sharing your success. Have a great week ahead 😀.
Just saved me $200 on a 6ah version, huge thanks for your time and thoughts on the repair.
You are very welcome . Thank you so much for taking the time to share your success. Have a wonderful week 😀.
Thanks buddy, worked a treat. 5AH back alive
You are very welcome. Thank you for sharing your good experience with us 😊. So happy it worked out for you. Have a great week ahead.
Thank you, this worked perfectly for my issue. Glad to have use of the battery again. 👍🏿
Wonderful. It's such good news to get back something of great value and not have to throw it away 🙂. Have a great week. Thank you for watching and sharing your success.
Mine was totally dead, battery error, lights on the battery unresponsive. My battery had a different looking card, but I followed the instructions and connected a paper clip between the gnd and rst contacts and pushed the button. It flashed green once and now the battery works again. Thanks!
You are very welcome. Thank you for sharing your success. Have a wonderful weekend.
Brilliant. Pressing the button while jumping it worked perfectly. Thank you for making this video.
You are very good. Thank you for sharing your success. It helps to give feedback to others. Have a great week.
Great tutorial! Saved me some serious money, I owe you a beer. Cheers!🍻
Thank you for sharing your success. Have a wonderful week ahead 😊.
Thank you! Just saved me $100+! Just did it on a Ryobi 40v 5ah that I hadn't touched for a couple years while in an apartment. Would have sucked to have to buy a new one!
So happy it worked for you. Thank you for sharing your success. Have a wonderful week ahead 😊.
I tried this procedure today and it worked just like you said it would. Thank you so much.
So glad you were able to save your battery. Thank you for sharing your success. Have a wonderful weekend 😀.
It worked for me as well! Thank you so much for the tutorial!
You are very welcome. I'm so thankful it helped. Thank you for sharing your success. Have a wonderful week 😀.
Thank you! Just fixed a 5 ah that I thought was lost! I didn’t have to press the button though. Mine flashed as soon as I jumped the two spots together.
Cool. There must be different build/ model year batteries. So glad you were able to save it. Have a wonderful week ahead. Thank you for sharing your experience with everyone.
Great video I did exactly what you said to do and it fixed my battery. Thank you I was going to take the battery to the recycling center. Appreciate you taking the time to make the video good step by step instructions 😊
You are very welcome. So happy to help and grateful you came back and reported your success. Have a great weekend.
You just saved me $199!! 😊Thank you 🎉😊
You are very welcome. Thank you so much for taking the time and effort to share your success. Have a wonderful week ahead 😊.
IT WORKED!!!! Thank you so much for this insightful video saved me $$$$ on a new battery!
You are very welcome. Thank you for taking the time to share your success. Have a great weekend.
I like your video straightforward to the point my Ryobi 40-volt battery is blinking green and charging awesome
Thank you so much. I am very pleased you were able to restart your battery 🔋. Thank you for sharing your success and have a wonderful new year ahead.
Thank you, This worked for me after a deep discharge on an old battery. It works.
You are very welcome. Glad it worked out for you. Thank you for sharing your success. Have a wonderful week.
Dang... this worked for me! After I bought 2 new batteries, but still good to revive this one. Thanks for the vid.
You are very welcome. Don't feel too bad, I bought a new one after trying several time ( without pressing the button). Later, I tried one more time and pressed the button 🙃...lol. Thank you for sharing your success.
Dude, thank you very much. I recently purchased a ryobi string trimmer at a yard sale really cheap because the owner couldn't get the battery out. I got it home and sure enough that battery was in there good. I decided maybe I could take it apart and get it out. Well that didn't help much because once I opened it up there was still this cage around d the battery lol. Finally I was able to fish my little 6in. Scale between the lach and the battery and I had to wack on the cage with the scale in place and it moved so I knew I had it at that point. Either as a practical joke or accident someone had gotten Glue on the battery and it was Glued in place. Once I got it out it was behaving like the one in you demo, so hopefully it will work once I follow your instructions. Which I will do at my own risk not because you suggested it or anything because you did not. You said not to do it unless I was qualified. So if anything were to happen it's Not on you my friend!🤠👍🙋♂️
Absolutely wonderful write-up. Hope it works out for you. Thank you for taking the time to share this.
Worked perfect for me! Thanks so much.
I'm so happy it worked out for you. Have a wonderful weekend and 4th. Thank you so much for watching and sharing your results.
Thank you!!! It worked for me just now.
So happy it worked for you. Thank you for sharing your success.
Amazing, it worked smoothly!!! Thank you for saving me a few hundred dollars!!🎉🎉
You are very welcome. Thankful that I was able to help. Have a wonderful week ahead 😊.
@@htnowpro thank you... Same for you sir!!
Incredible. In an ideal country of honor in our product design and not planned obsolescence greed, we'd have an external reset button to bridge these two and press power. Even official steps in the manual for such a process. But I'm thankful it works and it's still not terribly difficult to reset.
Mine actually flashed when I just touched the two for the reset - labeled RST.
Working! Probably just varies per revision or model of these batteries, if yours doesn't automatically blink on RST bridging, press the power button at the same time.
Had to use a real thin safety pin, took some wire clippers to one end. Tiny little RST holes, discouragement of that easy fix reset every step of the way hah.
You know I wonder how many of these batteries Ryobi takes in and merely resets, bam refurbished.
Thank you for sharing your experience 😊. It helps others. Yes, an external access reset button would have been great 👍. Have a great week 😀.
@@htnowpro Thanks, glad to help and y'all too!
thanks for a "complete" fix-it video....thank you
You are very welcome. Have a wonderful weekend 😀.
Stop STOP: This guy is a superstar !! I tried the paperclip trick on my ^%&^%$$#% 40 volt Ryobi battery and I could never get it to re ingage. I did as he instructed above using the paperclip AND pressing the test button on the back of the battery at the same time and WOWWWWW. I did it twice but it worked. His method worked and saved me a lot of money. Thank you again.
You are very welcome. Thank you so much for sharing your good experience with everyone. One more battery back to work. Have a great week.
Thanks a ton. Same issue and resolved following your process
You are very welcome. Thank you for sharing your success. Have a wonderful new year ahead ✨️.